A
-
Abaqus FEM software
Modeling and experimental study on the sealing gasket of proton exchange membrane fuel cells [Volume 3, Issue 3, 2016, Pages 213-220]
-
Acidic media
Ethanol electrooxidation on the Co@Pt core-shell nanoparticles modified carbon-ceramic electrode in acidic and alkaline media [Volume 3, Issue 1, 2016, Pages 19-31]
-
Activated transport
Nanostructured Palladium-Doped Silica Membrane Layer Synthesis for Hydrogen Separation: Effect of Activated Sublayers [Volume 6, Issue 1, 2019, Pages 1-9]
-
Adaptive
Hierarchical Control Strategy of Heat and Power for Zero Energy Buildings including Hybrid Fuel Cell/Photovoltaic Power Sources and Plug-in Electric Vehicle [Volume 3, Issue 1, 2016, Pages 33-44]
-
Adaptive control
A sensorless adaptive non-linear control scheme for minimizing the stator energy losses of IPMSM [Volume 11, Issue 2, 2024, Pages 131-141]
-
Additive Manufacturing
Additive Manufactured Parts Specifications and Applications in Catalytic Substrates and Fuel Cells [Volume 10, Issue 2, 2023, Pages 173-181]
-
Ag/TNT nanocomposite
Optimization of Ag loaded TiO2 nanotube arrays for plasmonic photoelectrochemical water splitting [Volume 6, Issue 2, 2019, Pages 133-140]
-
Air-cathode
Chemical kinetics analysis of a zinc-air fuel cell [Volume 11, Issue 1, 2024, Pages 39-45]
-
AISI 316L Stainless Steel
Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]
-
Al2O3 nanoparticles
Optimum calcination temperature for the synthesis of nanostructured alumina for energy storage heat management applications [Volume 11, Issue 1, 2024, Pages 8-18]
-
Alanate
Density Functional Studies on Crystal Structure and electronic properties of Potassium Alanate as a candidate for Hydrogen storage [Volume 2, Issue 3, 2015, Pages 169-179]
-
Alkaline direct glucose fuel cells
Electrocatalytic oxidation of glucose on the modified carbon paste electrode with sodalite nanozeolite for fuel cell [Volume 2, Issue 1, 2015, Pages 47-58]
-
Alkaline electrolyte
Chemical kinetics analysis of a zinc-air fuel cell [Volume 11, Issue 1, 2024, Pages 39-45]
-
Alkaline fuel cell
A Double Pipe Heat Exchanger Design and Optimization for Cooling an Alkaline Fuel Cell System [Volume 1, Issue 4, 2014, Pages 223-231]
-
Alkaline media
Ethanol electrooxidation on the Co@Pt core-shell nanoparticles modified carbon-ceramic electrode in acidic and alkaline media [Volume 3, Issue 1, 2016, Pages 19-31]
-
Alkaline media
Ni@Pt core-shell nanoparticles as an improved electrocatalyst for ethanol electrooxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 109-119]
-
All porous
Numerical Investigation of a Hydrogen-fuelled Planar AP-SOFC Performance with Special Focus on Safe Operation [Volume 8, Issue 2, 2021, Pages 113-125]
-
All-porous
Comparative Numerical Study of Co- and Counter-Flow Configurations of an All-Porous Solid Oxide Fuel Cell [Volume 8, Issue 2, 2021, Pages 77-93]
-
Alternating current
A brief review on the application of the virtual impedance method in islanded alternating current microgrids to control reactive power sharing [Volume 11, Issue 3, 2024, Pages 189-204]
-
Amination Agents
Investigation of ion transport and water content properties in anion exchange membranes based on polysulfone for solid alkaline fuel cell application [Volume 2, Issue 1, 2015, Pages 13-25]
-
ANFIS
Finite Element Simulation and ANFIS Prediction of Dimensional Error Effect on distribution of BPP/GDL Contact Pressure in PEM Fuel Cell [Volume 4, Issue 2, 2017, Pages 125-138]
-
Anion Exchange Membrane
Investigation of ion transport and water content properties in anion exchange membranes based on polysulfone for solid alkaline fuel cell application [Volume 2, Issue 1, 2015, Pages 13-25]
-
Annular geometry
The simulation of novel annular shape on the Performance in Proton Exchange Membrane Fuel Cell [Volume 1, Issue 3, 2014, Pages 175-188]
-
Anode potential
Modeling of Multi-population Microbial Fuel and Electrolysis Cells Based on the Bioanode Potential Conditions [Volume 1, Issue 4, 2014, Pages 247-260]
-
Anode product recycling
Effect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system [Volume 3, Issue 4, 2016, Pages 301-313]
-
Anode-supported
Three-dimensional modeling of transport phenomena in a planar anode-supported solid oxide fuel cell [Volume 4, Issue 1, 2017, Pages 37-52]
-
Applied voltage
The significance of key operational variables to the enhancement of hydrogen production in a single-chamber microbial electrolysis cell (MEC) [Volume 2, Issue 2, 2015, Pages 85-97]
-
Artificial neural network
Prediction the hydrogen adsorption isotherm on nickel decorated carbon nanotubes by applying artificial neural network modeling [Volume 8, Issue 2, 2021, Pages 61-68]
-
Au (100)
Interaction of atomic hydrogen with monometallic Au(100), Cu(100), Pt(100) surfaces and surface of bimetallic Au@Cu(100), Au@Pt(100) overlayer systems: The role of magnetism [Volume 4, Issue 3, 2017, Pages 209-218]
B
-
Batch process
Effect of batch vs. continuous mode of operation on microbial desalination cell performance treating municipal wastewater [Volume 3, Issue 4, 2016, Pages 281-290]
-
Battery
Fuel Cell Power System Conceptual Design for Unmanned Underwater Vehicle [Volume 10, Issue 1, 2023, Pages 33-50]
-
Bidirectional converter
A new SEPIC-Zeta bidirectional converter with high efficiency for renewable energy systems [Volume 11, Issue 3, 2024, Pages 142-152]
-
Biomass
Exergy-Economic Analysis of Combined Heat and Power System Utilizing Solar Energy and Biomass [(Articles in Press)]
-
Biomass Gasification
Energy Price Analysis of a Biomass Gasification-Solid Oxide Fuel Cell-Gas Turbine Power Plant [Volume 3, Issue 1, 2016, Pages 45-58]
-
Bipolar Plates
Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]
-
BIPV/T systems
Enhancing Solar Energy Utilization in Buildings: Integrating Transparent Solar Panels and BIPV/T Systems for Optimal Energy Efficiency in Tabriz, Iran [(Articles in Press)]
-
Buck-boost power electronic converters
Optimal Design of a Fractional-Order Controller for Stabilization and Control of DC Microgrids in the Presence of Constant Power and Voltage Loads Using a Grey Wolf Optimization Algorithm [(Articles in Press)]
-
Buckypaper electrode
Buckypaper-based catalytic electrode containing graphene nanoplates and ZrO2 nanorod composite to improve PEMFC performance [Volume 5, Issue 1, 2018, Pages 57-69]
C
-
Carbon black
Application of Pd-Substituted Ni-Al Layered Double Hydroxides for the Hydrogen Evolution Reaction [Volume 2, Issue 4, 2015, Pages 253-261]
-
Carbon-ceramic electrode
Platinum nanoparticles/functionalized carbon nanoparticles composites supported on the carbon-ceramic electrode and their electroactivity for ethanol oxidation [Volume 5, Issue 1, 2018, Pages 35-47]
-
Carbon dioxide utilization
Exergy and Energy Analysis of Effective Utilization of Carbon Dioxide in the Gas-to-Methanol Process [Volume 7, Issue 1, 2020, Pages 13-31]
-
Carbon fiber
Experimental Analysis of Fiber Laminating Effects on Flexural Rigidity of Composite Endplates for Use in PEM Fuel Cells [Volume 9, Issue 2, 2022, Pages 97-106]
-
Carbon Nanotube
Prediction the hydrogen adsorption isotherm on nickel decorated carbon nanotubes by applying artificial neural network modeling [Volume 8, Issue 2, 2021, Pages 61-68]
-
Cascade-type PEM fuel cell
Design and Analysis of an Innovative Dead-end Cascade-type PEMFC Stack at Different Orientations [Volume 7, Issue 1, 2020, Pages 81-96]
-
Cascade type stack
Electrochemical Impedance Spectroscopy for Investigation of Different Losses in 4-cells Short Stack with Integrated Humidifier and Water Separator [Volume 3, Issue 2, 2016, Pages 127-136]
-
Cascade type stack
Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization [Volume 3, Issue 3, 2016, Pages 183-197]
-
Catalyst
Palladium nanoparticles supported on carbon black powder as an effective anodic catalyst for application in a direct glucose alkaline fuel cell [Volume 3, Issue 1, 2016, Pages 11-17]
-
Catalyst
Impact of product gas recycling on steam methane reforming performance with Ni and Rh catalysts [Volume 11, Issue 3, 2024, Pages 169-178]
-
Catalyst Layer
Numerical study on the performance prediction of a proton exchange membrane (PEM) fuel cell [Volume 4, Issue 4, 2017, Pages 249-263]
-
Catalyst Layer
Effect of Solution Dielectric Constant on the Preparation of Gas Diffusion Electrode Reaction Layer for the Oxygen Reduction Reaction [Volume 10, Issue 2, 2023, Pages 97-109]
-
Catalyst Layer (CL)
A review of the main mechanisms of catalyst layer degradation in polymer electrolyte membrane fuel cell (PEMFC) and different performance recovery methods [Volume 6, Issue 2, 2019, Pages 91-115]
-
Catalytic Partial Oxidation (CPOX)
An Experimental Investigation on Simultaneous Effects of Oxygen Ratio and Flow-Rate in SOFCs Performance Fueled by a Mixture of Methane and Oxygen [Volume 6, Issue 1, 2019, Pages 11-22]
-
Cathode
Synthesis and investigation on microstructure and electrical conductivity of Ruddlesden-Popper phase, La1.9Sr0.1Ni0.7Cu0.3O4 (LSNC), as cathode material for intermediate temperature solid oxide fuel cells [Volume 8, Issue 2, 2021, Pages 69-76]
-
Cathode
Effect of Solution Dielectric Constant on the Preparation of Gas Diffusion Electrode Reaction Layer for the Oxygen Reduction Reaction [Volume 10, Issue 2, 2023, Pages 97-109]
-
Cathode product recycling
Effect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system [Volume 3, Issue 4, 2016, Pages 301-313]
-
Cathodes
La0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study [Volume 1, Issue 4, 2014, Pages 239-246]
-
Cathodic treatment
Kinetic study of CO desorption from cathodic electrochemically treated carbon paper supported Pt electrodes [Volume 4, Issue 3, 2017, Pages 201-207]
-
CeO2
Synthesis and Characterization of Co-doped CeO2 Ceramic Electrolyte for IT-SOFC [Volume 6, Issue 2, 2019, Pages 163-170]
-
Ceria
Optimization of Preparation Factors for Cerium Oxide Synthesis as a Support for CO PrOx Catalyst [Volume 1, Issue 3, 2014, Pages 189-197]
-
Cerium
The effect of copper infiltration on LSM Cathode microstructure in high temperature solid oxide fuel cells [Volume 10, Issue 4, 2023, Pages 281-290]
-
CFD
Performance Improvement of PEM Fuel Cells Using Air Channel Indentation; Part I: Mechanisms to Enrich Oxygen Concentration in Catalyst Layer [Volume 1, Issue 4, 2014, Pages 199-207]
-
CFD
Numerical analysis of reactant transport in the novel tubular polymer electrolyte membrane fuel cells [Volume 2, Issue 3, 2015, Pages 181-196]
-
CFD
Generalization of a CFD Model to Predict the Net Power in PEM Fuel Cells [Volume 6, Issue 1, 2019, Pages 23-37]
-
CFD model
Reforming Integrated with Oxidation in Micro-Heat Exchanger Reactor with Circular Micro-Channels [Volume 1, Issue 2, 2014, Pages 65-74]
-
CFD simulation
Transient Three-dimensional Simulation of a Metal Hydride Hydrogen Storage Tank Interconnected to a PEM Fuel Cell by Heat Pipes [Volume 6, Issue 2, 2019, Pages 117-132]
-
Channel
Modeling heat and mass transfer in laminar forced flow between parallel plates channel imposed to suction or injection [Volume 2, Issue 1, 2015, Pages 35-46]
-
Channel Indentation
Performance Improvement of PEM Fuel Cells Using Air Channel Indentation; Part I: Mechanisms to Enrich Oxygen Concentration in Catalyst Layer [Volume 1, Issue 4, 2014, Pages 199-207]
-
Characteristic Velocity
Performance verification of a laboratory scale hydrogen/oxygen combustion chamber [Volume 9, Issue 1, 2022, Pages 27-38]
-
Charge Transfer Coefficient estimation
Mechanistic approach developed to estimation of exchange current density and charge transfer coefficient in lead acid batteries [Volume 11, Issue 1, 2024, Pages 68-77]
-
Chemical Getter
Synthesis Zr-Co-Y based chemical getter and evaluation its vacuum preserving, sorption characteristics, and hydrogen absorption [Volume 6, Issue 2, 2019, Pages 171-184]
-
Chitosan
Implementation of Chitosan modified ultrafiltration hollow fiber as proton exchange membrane of ml-scale microbial fuel cells [Volume 10, Issue 4, 2023, Pages 299-310]
-
CHP
Performance assessment of a SOFC cogeneration system for residential buildings located in eastern Iran [Volume 3, Issue 2, 2016, Pages 81-97]
-
Clamping pressure
Investigation and optimization of a PEM fuel cell’s electrical and mechanical behavior [Volume 3, Issue 1, 2016, Pages 1-10]
-
CNF
Ethanol electro-oxidation on Pt/CNFs-GNPs/GDL electrode for fuel cell application [Volume 9, Issue 1, 2022, Pages 69-85]
-
CO2
A comparative study on the kinetics of carbon dioxide methanation over bimetallic and monometallic catalysts [Volume 3, Issue 1, 2016, Pages 59-71]
-
CO2 capture
Investigation of carbon dioxide capture from hydrogen using the thermal pressure swing adsorption process: Central composite design modeling [Volume 4, Issue 1, 2017, Pages 13-26]
-
CO2 reforming
Effect of K2O on the catalytic performance of Ni catalysts supported on nanocrystalline Al2O3 in CO2 reforming of methane [Volume 2, Issue 4, 2015, Pages 215-226]
-
Co3O4 coating
Co3O4 spinel protection coating for solid oxide fuel cell interconnect application [Volume 1, Issue 2, 2014, Pages 121-131]
-
Cobalt oxide hierarchical nanostructure
Facile hydrothermal synthesis and electrochemical investigation of a free-standing cobalt oxide hierarchical nanostructure electrode on a porous carbon structure as an efficient supercapacitor [Volume 11, Issue 2, 2024, Pages 123-130]
-
Co-doped graphene
Facile Synthesis of N, S-Doped Graphene from Sulfur Trioxide Pyridine Precursor for the Oxygen Reduction Reaction [Volume 4, Issue 3, 2017, Pages 231-240]
-
CO electro-oxidation
Enhancing the CO tolerance of Pt/C as PEM fuel cell anode catalyst by modifying the catalyst synthesis method [Volume 6, Issue 1, 2019, Pages 71-81]
-
Combined cycle
Performance Analysis and Working Fluids Selection of Organic Rankine Cycle in a Triple Power Generation System Combined with Gas Turbine and Solid Oxide Fuel Cell Cycles [Volume 10, Issue 1, 2023, Pages 11-32]
-
Commercial zirconia
Hydrothermal synthesis of nano-size zirconia using commercial zirconia powder: process optimization through response surface methodology [Volume 1, Issue 3, 2014, Pages 163-173]
-
Composite Bipolar Plate
Numerical-experimental study on the Failure Behavior of Graphite-Based Composite Bipolar Plate for PEM fuel cells [Volume 9, Issue 2, 2022, Pages 107-116]
-
Composite electrodes
Effect of temperature on kinetics of the hydrogen evolution reaction on Ni-P-C cathodes in alkaline solution [Volume 1, Issue 4, 2014, Pages 215-222]
-
Computational Fluid Dynamics (CFD)
Modeling and simulation of the fluid dynamic and performance of the Pd-based membrane by CFD for hydrogen separation [Volume 9, Issue 1, 2022, Pages 19-25]
-
Concentration distribution
Lattice Boltzmann Modeling of Methane Steam Reforming Reactions in Solid Oxide Fuel Cells [Volume 7, Issue 1, 2020, Pages 61-79]
-
Contact pressure distribution
Developed endplate geometry for uniform contact pressure distribution over PEMFC active area [Volume 7, Issue 1, 2020, Pages 1-12]
-
Contact pressure distribution
Study of Contact Pressure Distribution over MEA of the Three-Cell PEMFC with Metallic Bipolar Plates [Volume 10, Issue 1, 2023, Pages 69-79]
-
Continuous process
Effect of batch vs. continuous mode of operation on microbial desalination cell performance treating municipal wastewater [Volume 3, Issue 4, 2016, Pages 281-290]
-
CO Poisoning
Effect of CO in the reformatted fuel on the performance of Polymer Electrolyte Membrane (PEM) fuel cell [Volume 4, Issue 2, 2017, Pages 153-165]
-
CO Poisoning
Kinetic study of CO desorption from cathodic electrochemically treated carbon paper supported Pt electrodes [Volume 4, Issue 3, 2017, Pages 201-207]
-
Copper
The effect of copper infiltration on LSM Cathode microstructure in high temperature solid oxide fuel cells [Volume 10, Issue 4, 2023, Pages 281-290]
-
Copper-Nickel powder
Morphological and physical study of Cu-Ni sintered porous wicks used in heat pipes and fuel cells [Volume 3, Issue 4, 2016, Pages 255-266]
-
Co-precipitation
La0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study [Volume 1, Issue 4, 2014, Pages 239-246]
-
Co- precipitation
Methanol steam reforming; Effects of various metal oxides on the properties of a Cu-based catalyst [Volume 3, Issue 4, 2016, Pages 291-299]
-
CO Preferential Oxidation
Effect of platinum on Ceria supported Cu catalysts for PrOx process in fuel processors [Volume 1, Issue 1, 2014, Pages 1-100]
-
CO PrOx
Optimization of Preparation Factors for Cerium Oxide Synthesis as a Support for CO PrOx Catalyst [Volume 1, Issue 3, 2014, Pages 189-197]
-
Co@Pt nanoparticles
Ethanol electrooxidation on the Co@Pt core-shell nanoparticles modified carbon-ceramic electrode in acidic and alkaline media [Volume 3, Issue 1, 2016, Pages 19-31]
-
Core-shell
Ni@Pt core-shell nanoparticles as an improved electrocatalyst for ethanol electrooxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 109-119]
-
Core-shell
Ethanol electrooxidation on the Co@Pt core-shell nanoparticles modified carbon-ceramic electrode in acidic and alkaline media [Volume 3, Issue 1, 2016, Pages 19-31]
-
Cost model
A Double Pipe Heat Exchanger Design and Optimization for Cooling an Alkaline Fuel Cell System [Volume 1, Issue 4, 2014, Pages 223-231]
-
Crossover
Numerical investigation of methanol crossover through the membrane in a direct methanol fuel cell [Volume 5, Issue 1, 2018, Pages 21-33]
-
Cu (100)
Interaction of atomic hydrogen with monometallic Au(100), Cu(100), Pt(100) surfaces and surface of bimetallic Au@Cu(100), Au@Pt(100) overlayer systems: The role of magnetism [Volume 4, Issue 3, 2017, Pages 209-218]
-
Cu-based catalyst
Methanol steam reforming; Effects of various metal oxides on the properties of a Cu-based catalyst [Volume 3, Issue 4, 2016, Pages 291-299]
-
Cu catalysts
Effect of platinum on Ceria supported Cu catalysts for PrOx process in fuel processors [Volume 1, Issue 1, 2014, Pages 1-100]
-
Cu-doped, SOFC interconnect, Electrical conductivity
Synthesis and characterization of nanostructured Cux (Mn1.5-x/2Co1.5-x/2)O4 as an interconnect coating for solid oxide fuel cell [Volume 8, Issue 1, 2021, Pages 35-41]
-
CuO-ZnO-Al2O3
Effect of Sorbitol/Oxidizer Ratio on Microwave Assisted Solution Combustion Synthesis of Copper Based Nanocatalyst for Fuel Cell Grade Hydrogen Production [Volume 2, Issue 4, 2015, Pages 227-240]
-
Current Density extraction
Mechanistic approach developed to estimation of exchange current density and charge transfer coefficient in lead acid batteries [Volume 11, Issue 1, 2024, Pages 68-77]
-
Cyclic voltammetry
Enhancing the CO tolerance of Pt/C as PEM fuel cell anode catalyst by modifying the catalyst synthesis method [Volume 6, Issue 1, 2019, Pages 71-81]
D
-
DC bus
Optimal Design of a Fractional-Order Controller for Stabilization and Control of DC Microgrids in the Presence of Constant Power and Voltage Loads Using a Grey Wolf Optimization Algorithm [(Articles in Press)]
-
DC/DC Converter
Experimental Investigation of a High Efficiency Power Path Controller for PEM Fuel Cell and Battery Hybrid System [Volume 9, Issue 2, 2022, Pages 149-161]
-
DC microgrid configuration
Optimal Design of a Fractional-Order Controller for Stabilization and Control of DC Microgrids in the Presence of Constant Power and Voltage Loads Using a Grey Wolf Optimization Algorithm [(Articles in Press)]
-
Dead-end condition
Design and Analysis of an Innovative Dead-end Cascade-type PEMFC Stack at Different Orientations [Volume 7, Issue 1, 2020, Pages 81-96]
-
Dead-end Operation
Electrochemical Impedance Spectroscopy for Investigation of Different Losses in 4-cells Short Stack with Integrated Humidifier and Water Separator [Volume 3, Issue 2, 2016, Pages 127-136]
-
Deformation density
Lithium-oxygen charge transfer interaction: a deformation density analysis study [Volume 11, Issue 2, 2024, Pages 117-122]
-
Degradation
A review of the main mechanisms of catalyst layer degradation in polymer electrolyte membrane fuel cell (PEMFC) and different performance recovery methods [Volume 6, Issue 2, 2019, Pages 91-115]
-
Dehydration Temperature
Effect of Dehydration Temperature on the H2 Separation Potential of Hydroxy Sodalite Zeolite Membranes [Volume 1, Issue 4, 2014, Pages 209-214]
-
Density Functional Theory
"Physical properties and electronic structure of LaNi5 compound before and after hydrogenation: An experimental and theoretical approach" [Volume 1, Issue 1, 2014, Pages 27-39]
-
Density Functional Theory
Density Functional Studies on Crystal Structure and electronic properties of Potassium Alanate as a candidate for Hydrogen storage [Volume 2, Issue 3, 2015, Pages 169-179]
-
Developing flow
Modeling heat and mass transfer in laminar forced flow between parallel plates channel imposed to suction or injection [Volume 2, Issue 1, 2015, Pages 35-46]
-
DFT
Interaction of atomic hydrogen with monometallic Au(100), Cu(100), Pt(100) surfaces and surface of bimetallic Au@Cu(100), Au@Pt(100) overlayer systems: The role of magnetism [Volume 4, Issue 3, 2017, Pages 209-218]
-
Dielectric Constant
Effect of Solution Dielectric Constant on the Preparation of Gas Diffusion Electrode Reaction Layer for the Oxygen Reduction Reaction [Volume 10, Issue 2, 2023, Pages 97-109]
-
Digital Fabrication
Additive Manufactured Parts Specifications and Applications in Catalytic Substrates and Fuel Cells [Volume 10, Issue 2, 2023, Pages 173-181]
-
Direct glucose alkaline fuel cell (DGAFC)
Palladium nanoparticles supported on carbon black powder as an effective anodic catalyst for application in a direct glucose alkaline fuel cell [Volume 3, Issue 1, 2016, Pages 11-17]
-
Directional Porosity
Additive Manufactured Parts Specifications and Applications in Catalytic Substrates and Fuel Cells [Volume 10, Issue 2, 2023, Pages 173-181]
-
Direct methanol fuel cell
Numerical investigation of methanol crossover through the membrane in a direct methanol fuel cell [Volume 5, Issue 1, 2018, Pages 21-33]
-
Direct Methanol Fuel Cell (DMFC)
Green in-situ Fabrication of PtW/Poly Ethylen Dioxy Thiophene/Graphene Nanoplates/Gas Diffusion Layer (PtW/ PEDOT /GNP/GDL) Electrode and its Electrocatalytic Property for Direct Methanol Fuel Cells Application [Volume 6, Issue 1, 2019, Pages 39-58]
-
Direct methanol Fuel cells
Preparation and Characterization of Electrocatalyst Nanoparticles for Direct Methanol Fuel Cell Applications Using β-D-glucose as Protection Agent [Volume 4, Issue 1, 2017, Pages 1-11]
-
Direct reforming
An Experimental Investigation on Simultaneous Effects of Oxygen Ratio and Flow-Rate in SOFCs Performance Fueled by a Mixture of Methane and Oxygen [Volume 6, Issue 1, 2019, Pages 11-22]
-
DMFC
Numerical investigation of methanol crossover through the membrane in a direct methanol fuel cell [Volume 5, Issue 1, 2018, Pages 21-33]
-
Doped zinc oxide
Electrochemical evaluation of electrodeposited platinum on a modified carbon substrate with cobalt, nickel and copper doped zinc oxide for the methanol oxidation reaction [Volume 5, Issue 1, 2018, Pages 49-55]
-
Dry reforming
Investigation of the catalytic performance and coke formation of nanocrystalline Ni/SrO-Al2O3 catalyst in dry reforming of methane [Volume 3, Issue 4, 2016, Pages 315-322]
-
Durability test
Mechanical and chemical characteristics of the PEM fuel cell sealants in simulated environment [Volume 9, Issue 2, 2022, Pages 163-178]
-
Dynamic
Dynamic investigation of hydrocarbon proton exchange membrane Fuel Cell [Volume 4, Issue 3, 2017, Pages 219-230]
-
Dynamic modeling
Investigation of vessels pressure effect on PEM electrolyzer performance by using a new OneDimensional Dynamic Model [Volume 2, Issue 4, 2015, Pages 271-281]
-
Dynamics Simulation
New Mathematical Modelling and Dynamic Simulation of a Molten Carbonate Fuel Cell [Volume 2, Issue 4, 2015, Pages 241-252]
E
-
Economic Modelling
Energy Price Analysis of a Biomass Gasification-Solid Oxide Fuel Cell-Gas Turbine Power Plant [Volume 3, Issue 1, 2016, Pages 45-58]
-
Electocatalyst
Preparation and Characterization of Electrocatalyst Nanoparticles for Direct Methanol Fuel Cell Applications Using β-D-glucose as Protection Agent [Volume 4, Issue 1, 2017, Pages 1-11]
-
Electrical conductivity
Synthesis and electrochemical properties of Sr3Fe1.8Co0.2O7 as a solid oxide fuel cell cathode [Volume 8, Issue 1, 2021, Pages 51-58]
-
Electrical conductivity
Synthesis and investigation on microstructure and electrical conductivity of Ruddlesden-Popper phase, La1.9Sr0.1Ni0.7Cu0.3O4 (LSNC), as cathode material for intermediate temperature solid oxide fuel cells [Volume 8, Issue 2, 2021, Pages 69-76]
-
Electrical resistance
Investigation and optimization of a PEM fuel cell’s electrical and mechanical behavior [Volume 3, Issue 1, 2016, Pages 1-10]
-
Electrocatalyst
Platinum nanoparticles/functionalized carbon nanoparticles composites supported on the carbon-ceramic electrode and their electroactivity for ethanol oxidation [Volume 5, Issue 1, 2018, Pages 35-47]
-
Electrocatalyst
Electrochemical evaluation of electrodeposited platinum on a modified carbon substrate with cobalt, nickel and copper doped zinc oxide for the methanol oxidation reaction [Volume 5, Issue 1, 2018, Pages 49-55]
-
Electrocatalyst
Metal‐organic framework‐derived Cu@Co4N nanoparticles anchored on N-doped carbon nanotubes for efficient and stable ORR activity [Volume 10, Issue 4, 2023, Pages 327-337]
-
Electrochemical behavior
Synthesis and electrochemical properties of Sr3Fe1.8Co0.2O7 as a solid oxide fuel cell cathode [Volume 8, Issue 1, 2021, Pages 51-58]
-
Electrochemical impedance spectroscopy
Effect of temperature on kinetics of the hydrogen evolution reaction on Ni-P-C cathodes in alkaline solution [Volume 1, Issue 4, 2014, Pages 215-222]
-
Electrochemical impedance spectroscopy
In situ activation of a Ni catalyst with Mo ion for hydrogen evolution reaction in alkaline solution [Volume 3, Issue 2, 2016, Pages 151-158]
-
Electrochemical Impedance Spectroscopy (EIS)
Electrochemical Impedance Spectroscopy for Investigation of Different Losses in 4-cells Short Stack with Integrated Humidifier and Water Separator [Volume 3, Issue 2, 2016, Pages 127-136]
-
Electrochemical Impedance Spectroscopy (EIS)
Preparation of Ni-P-CeO2 electrode and study on electrocatalytic properties for hydrogen evolution reaction [Volume 5, Issue 1, 2018, Pages 1-11]
-
Electrochemical Kinetics
Mechanistic approach developed to estimation of exchange current density and charge transfer coefficient in lead acid batteries [Volume 11, Issue 1, 2024, Pages 68-77]
-
Electrochemical model
Development and Simulation of a PEM Fuel Cell model for Prediction of Water Content and Power Generation [Volume 4, Issue 4, 2017, Pages 289-299]
-
Electrodeposition
Kinetics study of hydrogen evolution reaction on a high porous three dimensional NiPC alloy [Volume 8, Issue 2, 2021, Pages 95-101]
-
Electrodeposition
Ethanol electro-oxidation on Pt/CNFs-GNPs/GDL electrode for fuel cell application [Volume 9, Issue 1, 2022, Pages 69-85]
-
Electroless plating technique
Palladium composite membrane with high reversibility of CO2 poisoning [Volume 5, Issue 1, 2018, Pages 13-19]
-
Electrolysis
Investigation of vessels pressure effect on PEM electrolyzer performance by using a new OneDimensional Dynamic Model [Volume 2, Issue 4, 2015, Pages 271-281]
-
Electrooxidation
Electrocatalytic oxidation of glucose on the modified carbon paste electrode with sodalite nanozeolite for fuel cell [Volume 2, Issue 1, 2015, Pages 47-58]
-
Electrooxidation
Ni@Pt core-shell nanoparticles as an improved electrocatalyst for ethanol electrooxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 109-119]
-
Electrophoretic deposition
Electrophoretic deposition of MnCr2O4 coating for solid oxide fuel cell metallic interconnects [Volume 1, Issue 1, 2014, Pages 21-26]
-
Electrophoretic deposition
Co3O4 spinel protection coating for solid oxide fuel cell interconnect application [Volume 1, Issue 2, 2014, Pages 121-131]
-
Emissions
Thermoexergetic analysis of common rail direct injection diesel engine on optimized multiple injection strategy of performance and emission using congress grass tamarind shell co-pyrolysis oil blend and diesel [Volume 11, Issue 2, 2024, Pages 78-94]
-
End plate
Design and Investigation of Honeycomb End Plates for PEM Fuel Cells [Volume 4, Issue 3, 2017, Pages 189-199]
-
Energy and exergy analysis
Thermodynamic evaluation of a novel geothermal and solar-driven multigeneration system for hydrogen and freshwater production [Volume 10, Issue 1, 2023, Pages 51-67]
-
Energy efficiency
A Double Pipe Heat Exchanger Design and Optimization for Cooling an Alkaline Fuel Cell System [Volume 1, Issue 4, 2014, Pages 223-231]
-
Energy efficiency
Simulation of a Solid Oxide Fuel Cell with External Steam Methane Reforming and Bypass [Volume 4, Issue 2, 2017, Pages 103-118]
-
Energy Management
Energy Management Simulation in a PEM Fuel Cell System [Volume 2, Issue 1, 2015, Pages 1-6]
-
Energy Price
Energy Price Analysis of a Biomass Gasification-Solid Oxide Fuel Cell-Gas Turbine Power Plant [Volume 3, Issue 1, 2016, Pages 45-58]
-
Energy Storage
Hierarchical Control Strategy of Heat and Power for Zero Energy Buildings including Hybrid Fuel Cell/Photovoltaic Power Sources and Plug-in Electric Vehicle [Volume 3, Issue 1, 2016, Pages 33-44]
-
Energy Storage
A brief review on the application of the virtual impedance method in islanded alternating current microgrids to control reactive power sharing [Volume 11, Issue 3, 2024, Pages 189-204]
-
Energy Storage
Future Prospects of Solar Energy Production and Storage in Iran [(Articles in Press)]
-
Energy Storage System
Integration of a Vanadium Redox Flow Battery with a Proton Exchange Membrane Fuel Cell as an Energy Storage System [Volume 4, Issue 1, 2017, Pages 53-68]
-
Engineering Modeling of batteries
Extremely Fast Simulation of the Li--Ion Batteries Governing Equations [Volume 10, Issue 4, 2023, Pages 339-353]
-
Enthalpy of hydrogen dissolution
Determination of thermodynamic parameters of hydrogen permeation of palladium membrane for considering the effect of stainless steel support [Volume 1, Issue 1, 2014, Pages 1-10]
-
Ethanol
Ni@Pt core-shell nanoparticles as an improved electrocatalyst for ethanol electrooxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 109-119]
-
Ethanol
Ethanol electrooxidation on the Co@Pt core-shell nanoparticles modified carbon-ceramic electrode in acidic and alkaline media [Volume 3, Issue 1, 2016, Pages 19-31]
-
Ethanol electro-oxidation
Ethanol electro-oxidation on Pt/CNFs-GNPs/GDL electrode for fuel cell application [Volume 9, Issue 1, 2022, Pages 69-85]
-
Ethanol oxidation
Platinum nanoparticles/functionalized carbon nanoparticles composites supported on the carbon-ceramic electrode and their electroactivity for ethanol oxidation [Volume 5, Issue 1, 2018, Pages 35-47]
-
Exergy
Performance assessment of a SOFC cogeneration system for residential buildings located in eastern Iran [Volume 3, Issue 2, 2016, Pages 81-97]
-
Exergy
Performance Analysis and Working Fluids Selection of Organic Rankine Cycle in a Triple Power Generation System Combined with Gas Turbine and Solid Oxide Fuel Cell Cycles [Volume 10, Issue 1, 2023, Pages 11-32]
-
Exergy
Thermoexergetic analysis of common rail direct injection diesel engine on optimized multiple injection strategy of performance and emission using congress grass tamarind shell co-pyrolysis oil blend and diesel [Volume 11, Issue 2, 2024, Pages 78-94]
-
Exergy
Thermo-economic analysis of triple production system combination with Gas turbine, solid oxide fuel cell and absorption chiller [(Articles in Press)]
-
Exergy analysis
Exergy and Energy Analysis of Effective Utilization of Carbon Dioxide in the Gas-to-Methanol Process [Volume 7, Issue 1, 2020, Pages 13-31]
-
Exergy analysis
Performance assessment of a power/refrigeration cogeneration system driven by the waste heat of a solid oxide fuel cell [Volume 10, Issue 3, 2023, Pages 241-256]
-
Exergy Efficiency
Exergy Analysis of a Molten Carbonate Fuel Cell-Turbo Expander-Steam Turbine Hybrid Cycle [Volume 3, Issue 4, 2016, Pages 267-279]
-
Exergy Efficiency
Multi-objective optimization of a combined heat and power (CHP) cycle with a solar collector: energy, exergy and economic point of view [Volume 11, Issue 2, 2024, Pages 95-106]
-
Exergy Efficiency
Parametric study of a membrane energy exchanger based on energy, entropy, and exergy analysis for proton exchange membrane fuel cell application [Volume 11, Issue 3, 2024, Pages 153-168]
-
Experimental study
Design and Analysis of an Innovative Dead-end Cascade-type PEMFC Stack at Different Orientations [Volume 7, Issue 1, 2020, Pages 81-96]
F
-
Fe
Study the stability of Si, Ge, Fe and Co in the interior surface of metallic carbon nanotube for hydrogen storage [Volume 2, Issue 3, 2015, Pages 197-205]
-
Finite element simulation
Developed endplate geometry for uniform contact pressure distribution over PEMFC active area [Volume 7, Issue 1, 2020, Pages 1-12]
-
Finite element simulation
Experimental study and numerical modeling of vibrational characteristics of a 500W PEM fuel cell stack [Volume 9, Issue 1, 2022, Pages 39-52]
-
Finite element simulation
Numerical-experimental study on the Failure Behavior of Graphite-Based Composite Bipolar Plate for PEM fuel cells [Volume 9, Issue 2, 2022, Pages 107-116]
-
Finite Volume
Investigation of vessels pressure effect on PEM electrolyzer performance by using a new OneDimensional Dynamic Model [Volume 2, Issue 4, 2015, Pages 271-281]
-
Fixed Bed Reactors
Hydrogen production by steam reforming of dimethyle ether over Cu/ZnO/Al2O3 and H-ZSM-5 catalysts: An experimental and modeling study [Volume 1, Issue 3, 2014, Pages 153-161]
-
Flexural modulus
Experimental Analysis of Fiber Laminating Effects on Flexural Rigidity of Composite Endplates for Use in PEM Fuel Cells [Volume 9, Issue 2, 2022, Pages 97-106]
-
Flooding drying
Development and Simulation of a PEM Fuel Cell model for Prediction of Water Content and Power Generation [Volume 4, Issue 4, 2017, Pages 289-299]
-
Flow Field Design
Generalization of a CFD Model to Predict the Net Power in PEM Fuel Cells [Volume 6, Issue 1, 2019, Pages 23-37]
-
Flow geometry
Comparative Numerical Study of Co- and Counter-Flow Configurations of an All-Porous Solid Oxide Fuel Cell [Volume 8, Issue 2, 2021, Pages 77-93]
-
Freshwater
Applying geothermal and solar energies for the thermodynamic estimation of the multigeneration system’s performance in producing power, freshwater and hydrogen [Volume 11, Issue 3, 2024, Pages 179-188]
-
Freshwater
Analysis and performance evaluation of a multigeneration system applying PV/T and PTC solar collectors from hydrogen and freshwater production point of view [Volume 11, Issue 3, 2024, Pages 205-214]
-
Fuel cell performance
The effect of inclined radial flow in proton exchange membrane fuel cells performance [Volume 1, Issue 3, 2014, Pages 141-152]
-
Fuel Cells
Generalization of a CFD Model to Predict the Net Power in PEM Fuel Cells [Volume 6, Issue 1, 2019, Pages 23-37]
-
Fuel/Oxidizer Ratio
Effect of Sorbitol/Oxidizer Ratio on Microwave Assisted Solution Combustion Synthesis of Copper Based Nanocatalyst for Fuel Cell Grade Hydrogen Production [Volume 2, Issue 4, 2015, Pages 227-240]
-
Fuzzy Control
Hierarchical Control Strategy of Heat and Power for Zero Energy Buildings including Hybrid Fuel Cell/Photovoltaic Power Sources and Plug-in Electric Vehicle [Volume 3, Issue 1, 2016, Pages 33-44]
G
-
Galvanostatic Electrodeposition
Green in-situ Fabrication of PtW/Poly Ethylen Dioxy Thiophene/Graphene Nanoplates/Gas Diffusion Layer (PtW/ PEDOT /GNP/GDL) Electrode and its Electrocatalytic Property for Direct Methanol Fuel Cells Application [Volume 6, Issue 1, 2019, Pages 39-58]
-
Gas Diffusion
Lattice Boltzmann modeling of two component gas diffusion in solid oxide fuel cell [Volume 2, Issue 4, 2015, Pages 263-270]
-
Gas Diffusion Layer
Numerical study on the performance prediction of a proton exchange membrane (PEM) fuel cell [Volume 4, Issue 4, 2017, Pages 249-263]
-
Gas Diffusion Layer
Lattice Boltzmann simulation of water transfer in gas diffusion layers with porosity gradient of polymer electrolyte membrane fuel cells with parallel processing on GPU [Volume 7, Issue 1, 2020, Pages 45-60]
-
Gas Flow
Lattice Boltzmann modeling of two component gas diffusion in solid oxide fuel cell [Volume 2, Issue 4, 2015, Pages 263-270]
-
Gas turbine
Energy Price Analysis of a Biomass Gasification-Solid Oxide Fuel Cell-Gas Turbine Power Plant [Volume 3, Issue 1, 2016, Pages 45-58]
-
Gas turbine
Effect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system [Volume 3, Issue 4, 2016, Pages 301-313]
-
Gas turbine
Multi-objective optimization of two hybrid power generation systems for optimum selection of SOFC reactants heat exchangers mid-temperatures [Volume 4, Issue 3, 2017, Pages 175-188]
-
Gas turbine
Performance Analysis and Working Fluids Selection of Organic Rankine Cycle in a Triple Power Generation System Combined with Gas Turbine and Solid Oxide Fuel Cell Cycles [Volume 10, Issue 1, 2023, Pages 11-32]
-
Gas turbine
Comparison and Analysis of Dynamic Behavior of Load Frequency Control in Power System with Steam, Hydro and Gas Power Plants [Volume 10, Issue 4, 2023, Pages 311-325]
-
Gas turbine
Thermo-economic analysis of triple production system combination with Gas turbine, solid oxide fuel cell and absorption chiller [(Articles in Press)]
-
GDL contact pressure
Finite Element Simulation and ANFIS Prediction of Dimensional Error Effect on distribution of BPP/GDL Contact Pressure in PEM Fuel Cell [Volume 4, Issue 2, 2017, Pages 125-138]
-
Genetic algorithm
Modeling of measurement error in refractive index determination of fuel cell using neural network and genetic algorithm [Volume 1, Issue 2, 2014, Pages 95-104]
-
Geobacter sulfurreducens PCA
The significance of key operational variables to the enhancement of hydrogen production in a single-chamber microbial electrolysis cell (MEC) [Volume 2, Issue 2, 2015, Pages 85-97]
-
Geometry of endplate
Developed endplate geometry for uniform contact pressure distribution over PEMFC active area [Volume 7, Issue 1, 2020, Pages 1-12]
-
Geothermal energy
Thermodynamic and thermoeconomic analysis of a multigeneration system using solar and geothermal energies [(Articles in Press)]
-
Glass fiber
Experimental Analysis of Fiber Laminating Effects on Flexural Rigidity of Composite Endplates for Use in PEM Fuel Cells [Volume 9, Issue 2, 2022, Pages 97-106]
-
Glassy carbon electrode (GCE)
Palladium nanoparticles supported on carbon black powder as an effective anodic catalyst for application in a direct glucose alkaline fuel cell [Volume 3, Issue 1, 2016, Pages 11-17]
-
Glucose
Electrocatalytic oxidation of glucose on the modified carbon paste electrode with sodalite nanozeolite for fuel cell [Volume 2, Issue 1, 2015, Pages 47-58]
-
GNP
Ethanol electro-oxidation on Pt/CNFs-GNPs/GDL electrode for fuel cell application [Volume 9, Issue 1, 2022, Pages 69-85]
-
GPU parallel processing
Lattice Boltzmann simulation of water transfer in gas diffusion layers with porosity gradient of polymer electrolyte membrane fuel cells with parallel processing on GPU [Volume 7, Issue 1, 2020, Pages 45-60]
-
Graphene
Synthesis of Supported Pt Alloy three Dimensional Rhombus Shapes Nanoparticles for Oxygen Reduction Reaction [Volume 2, Issue 2, 2015, Pages 121-130]
-
Graphene
Synthesis and electrochemical characterization of Graphene-Polyallylamine Nanocomposites as a New Supports of Pt Catalyst for Direct Methanol Fuel Cell Application [Volume 6, Issue 2, 2019, Pages 141-161]
-
Graphene Oxide
Electrochemical Study of Hydrogen Adsorption/Reduction (HAR) Reaction on Graphene Oxide as Electrocatalyst for Proton Exchange Membrane Fuel Cells [Volume 2, Issue 2, 2015, Pages 99-107]
-
Greenhouse gas
Exergy and Energy Analysis of Effective Utilization of Carbon Dioxide in the Gas-to-Methanol Process [Volume 7, Issue 1, 2020, Pages 13-31]
-
Green Hydrogen
Prospects and challenges for the production and use of green hydrogen as a promising energy in Libya [Volume 11, Issue 1, 2024, Pages 1-7]
H
-
H2 production
The effect of solvent of titanium precursor in the sol-gel process on the activity of TiO2 nanoparticles for H2 production [Volume 4, Issue 2, 2017, Pages 139-151]
-
HAR reaction
Electrochemical Study of Hydrogen Adsorption/Reduction (HAR) Reaction on Graphene Oxide as Electrocatalyst for Proton Exchange Membrane Fuel Cells [Volume 2, Issue 2, 2015, Pages 99-107]
-
Heat and mass transfer
Modeling heat and mass transfer in laminar forced flow between parallel plates channel imposed to suction or injection [Volume 2, Issue 1, 2015, Pages 35-46]
-
Heat of formation
"Physical properties and electronic structure of LaNi5 compound before and after hydrogenation: An experimental and theoretical approach" [Volume 1, Issue 1, 2014, Pages 27-39]
-
Heat pipes
Transient Three-dimensional Simulation of a Metal Hydride Hydrogen Storage Tank Interconnected to a PEM Fuel Cell by Heat Pipes [Volume 6, Issue 2, 2019, Pages 117-132]
-
Heat Recovery
Simulation of a Solid Oxide Fuel Cell with External Steam Methane Reforming and Bypass [Volume 4, Issue 2, 2017, Pages 103-118]
-
Heat transfer
A Double Pipe Heat Exchanger Design and Optimization for Cooling an Alkaline Fuel Cell System [Volume 1, Issue 4, 2014, Pages 223-231]
-
Heterodyne interferometer
Modeling of measurement error in refractive index determination of fuel cell using neural network and genetic algorithm [Volume 1, Issue 2, 2014, Pages 95-104]
-
High Efficiency
A new SEPIC-Zeta bidirectional converter with high efficiency for renewable energy systems [Volume 11, Issue 3, 2024, Pages 142-152]
-
Highly Ordered Nanoporous β -Ni(OH)2
Highly Ordered Nanoporous β-Ni(OH)2 Nanobelt Array Architectures as Electrode Material for Electrochemical Capacitors: Design, Synthesis, Characterization and Supercapacitive Evaluation [Volume 10, Issue 2, 2023, Pages 157-171]
-
High step-up converter
A New ZVT Interleaved High Step-up Converter with Ripple Cancelation for Photovoltaic Systems [(Articles in Press)]
-
High-temperature SOFC
The effect of copper infiltration on LSM Cathode microstructure in high temperature solid oxide fuel cells [Volume 10, Issue 4, 2023, Pages 281-290]
-
Hollow fiber membrane
Implementation of Chitosan modified ultrafiltration hollow fiber as proton exchange membrane of ml-scale microbial fuel cells [Volume 10, Issue 4, 2023, Pages 299-310]
-
HOMER
Generating electricity using pico hydro-based power plant in Koohrang county, Iran: effect of energy storage type [Volume 11, Issue 1, 2024, Pages 19-38]
-
Honeycomb
Design and Investigation of Honeycomb End Plates for PEM Fuel Cells [Volume 4, Issue 3, 2017, Pages 189-199]
-
Hybrid
Fuel Cell Power System Conceptual Design for Unmanned Underwater Vehicle [Volume 10, Issue 1, 2023, Pages 33-50]
-
Hybrid Cycle
Exergy Analysis of a Molten Carbonate Fuel Cell-Turbo Expander-Steam Turbine Hybrid Cycle [Volume 3, Issue 4, 2016, Pages 267-279]
-
Hybridization Circuit
Experimental Investigation of a High Efficiency Power Path Controller for PEM Fuel Cell and Battery Hybrid System [Volume 9, Issue 2, 2022, Pages 149-161]
-
Hybrid Power Control Photovoltaic & Fuel Cell
Hierarchical Control Strategy of Heat and Power for Zero Energy Buildings including Hybrid Fuel Cell/Photovoltaic Power Sources and Plug-in Electric Vehicle [Volume 3, Issue 1, 2016, Pages 33-44]
-
Hybrid system
Effect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system [Volume 3, Issue 4, 2016, Pages 301-313]
-
Hybrid system
Energy and economic comparison of SOFC-GT, MCFC-GT, and SOFC-MCFC-GT hybrid systems [Volume 4, Issue 4, 2017, Pages 275-287]
-
Hydriding kinetic
"Physical properties and electronic structure of LaNi5 compound before and after hydrogenation: An experimental and theoretical approach" [Volume 1, Issue 1, 2014, Pages 27-39]
-
Hydriding kinetic
Synthesis, characterization and hydrogen storage properties of Mm(Ni,Co,Mn,Al)5 alloy [Volume 1, Issue 2, 2014, Pages 83-94]
-
Hydrocarbon proton exchange membrane
Dynamic investigation of hydrocarbon proton exchange membrane Fuel Cell [Volume 4, Issue 3, 2017, Pages 219-230]
-
Hydrogen
Theoretical study of the effect of hydrogen addition to natural gas-fueled direct-injection engines [Volume 1, Issue 1, 2014, Pages 11-20]
-
Hydrogen
Effect of Sorbitol/Oxidizer Ratio on Microwave Assisted Solution Combustion Synthesis of Copper Based Nanocatalyst for Fuel Cell Grade Hydrogen Production [Volume 2, Issue 4, 2015, Pages 227-240]
-
Hydrogen
Influence of unsuitable operational conditions on the transient performance of a small hydrogen liquefier [Volume 3, Issue 3, 2016, Pages 199-212]
-
Hydrogen
Methanol steam reforming; Effects of various metal oxides on the properties of a Cu-based catalyst [Volume 3, Issue 4, 2016, Pages 291-299]
-
Hydrogen
Iranian hydrogen production insight: research trends and outlook [Volume 8, Issue 1, 2021, Pages 23-33]
-
Hydrogen
Comparative Numerical Study of Co- and Counter-Flow Configurations of an All-Porous Solid Oxide Fuel Cell [Volume 8, Issue 2, 2021, Pages 77-93]
-
Hydrogen
Generating electricity using pico hydro-based power plant in Koohrang county, Iran: effect of energy storage type [Volume 11, Issue 1, 2024, Pages 19-38]
-
Hydrogen
Applying geothermal and solar energies for the thermodynamic estimation of the multigeneration system’s performance in producing power, freshwater and hydrogen [Volume 11, Issue 3, 2024, Pages 179-188]
-
Hydrogen
Analysis and performance evaluation of a multigeneration system applying PV/T and PTC solar collectors from hydrogen and freshwater production point of view [Volume 11, Issue 3, 2024, Pages 205-214]
-
Hydrogen
Thermodynamic investigation of a solar-based multigeneration system using AL2O3-Thermonol VP1 nanofluid [(Articles in Press)]
-
Hydrogen
Hydrogen Utilization in Free Piston Engines: A Performance Investigation [(Articles in Press)]
-
Hydrogen adsorption
Interaction of atomic hydrogen with monometallic Au(100), Cu(100), Pt(100) surfaces and surface of bimetallic Au@Cu(100), Au@Pt(100) overlayer systems: The role of magnetism [Volume 4, Issue 3, 2017, Pages 209-218]
-
Hydrogen adsorption
Prediction the hydrogen adsorption isotherm on nickel decorated carbon nanotubes by applying artificial neural network modeling [Volume 8, Issue 2, 2021, Pages 61-68]
-
Hydrogen and electricity
The significance of key operational variables to the enhancement of hydrogen production in a single-chamber microbial electrolysis cell (MEC) [Volume 2, Issue 2, 2015, Pages 85-97]
-
Hydrogen evolution reaction
Application of Pd-Substituted Ni-Al Layered Double Hydroxides for the Hydrogen Evolution Reaction [Volume 2, Issue 4, 2015, Pages 253-261]
-
Hydrogen evolution reaction
In situ activation of a Ni catalyst with Mo ion for hydrogen evolution reaction in alkaline solution [Volume 3, Issue 2, 2016, Pages 151-158]
-
Hydrogen evolution reaction (HER)
Effect of temperature on kinetics of the hydrogen evolution reaction on Ni-P-C cathodes in alkaline solution [Volume 1, Issue 4, 2014, Pages 215-222]
-
Hydrogen evolution reaction (HER)
Preparation of Ni-P-CeO2 electrode and study on electrocatalytic properties for hydrogen evolution reaction [Volume 5, Issue 1, 2018, Pages 1-11]
-
Hydrogen evolution reaction (HER)
Kinetics study of hydrogen evolution reaction on a high porous three dimensional NiPC alloy [Volume 8, Issue 2, 2021, Pages 95-101]
-
Hydrogen-fuelled
Numerical Investigation of a Hydrogen-fuelled Planar AP-SOFC Performance with Special Focus on Safe Operation [Volume 8, Issue 2, 2021, Pages 113-125]
-
Hydrogen/Oxygen Engine
Performance verification of a laboratory scale hydrogen/oxygen combustion chamber [Volume 9, Issue 1, 2022, Pages 27-38]
-
Hydrogen production
Hydrogen production by steam reforming of dimethyle ether over Cu/ZnO/Al2O3 and H-ZSM-5 catalysts: An experimental and modeling study [Volume 1, Issue 3, 2014, Pages 153-161]
-
Hydrogen production
Hydrogen production via steam reforming of LPG on Ni/Zeolite catalysts [Volume 1, Issue 4, 2014, Pages 233-238]
-
Hydrogen production
Investigation of vessels pressure effect on PEM electrolyzer performance by using a new OneDimensional Dynamic Model [Volume 2, Issue 4, 2015, Pages 271-281]
-
Hydrogen production
Thermodynamic evaluation of a novel geothermal and solar-driven multigeneration system for hydrogen and freshwater production [Volume 10, Issue 1, 2023, Pages 51-67]
-
Hydrogen production
Simulation of integrated purification systems for hydrogen production in methanol steam reforming process [Volume 10, Issue 3, 2023, Pages 158-199]
-
Hydrogen production
Thermodynamic investigation of applying a thermoelectric generator to produce hydrogen in a multigeneration system [Volume 10, Issue 2, 2023, Pages 131-145]
-
Hydrogen production
Assessment of a novel photovoltaic-electrolyzer-fuel cell-ORC hybrid energy system for hydrogen and power production [Volume 10, Issue 2, 2023, Pages 111-130]
-
Hydrogen production
Impact of product gas recycling on steam methane reforming performance with Ni and Rh catalysts [Volume 11, Issue 3, 2024, Pages 169-178]
-
Hydrogen production
Thermodynamic and thermoeconomic analysis of a multigeneration system using solar and geothermal energies [(Articles in Press)]
-
Hydrogen production rate
The significance of key operational variables to the enhancement of hydrogen production in a single-chamber microbial electrolysis cell (MEC) [Volume 2, Issue 2, 2015, Pages 85-97]
-
Hydrogen purification
Effect of platinum on Ceria supported Cu catalysts for PrOx process in fuel processors [Volume 1, Issue 1, 2014, Pages 1-100]
-
Hydrogen purification
Preparation of Pd composite membrane via organic-inorganic activation method in electroless plating technique [Volume 2, Issue 3, 2015, Pages 151-158]
-
Hydrogen purification
Investigation of carbon dioxide capture from hydrogen using the thermal pressure swing adsorption process: Central composite design modeling [Volume 4, Issue 1, 2017, Pages 13-26]
-
Hydrogen Separation
Effect of Dehydration Temperature on the H2 Separation Potential of Hydroxy Sodalite Zeolite Membranes [Volume 1, Issue 4, 2014, Pages 209-214]
-
Hydrogen Separation
Nanostructured Palladium-Doped Silica Membrane Layer Synthesis for Hydrogen Separation: Effect of Activated Sublayers [Volume 6, Issue 1, 2019, Pages 1-9]
-
Hydrogen Separation
Silica membrane performance for hydrogen separation from methanol steam reforming products: Assessment of different multistage membrane schemes [Volume 6, Issue 1, 2019, Pages 59-70]
-
Hydrogen Separation
Modeling and simulation of the fluid dynamic and performance of the Pd-based membrane by CFD for hydrogen separation [Volume 9, Issue 1, 2022, Pages 19-25]
-
Hydrogen storage materials
Density Functional Studies on Crystal Structure and electronic properties of Potassium Alanate as a candidate for Hydrogen storage [Volume 2, Issue 3, 2015, Pages 169-179]
-
Hydrogen storage tank
Mechanical behavior of metal hydrides and hydrogen storage containers: A review [Volume 10, Issue 3, 2023, Pages 257-278]
-
Hydrothermal synthesis
Hydrothermal synthesis of nano-size zirconia using commercial zirconia powder: process optimization through response surface methodology [Volume 1, Issue 3, 2014, Pages 163-173]
-
Hydroxy Sodalite
Effect of Dehydration Temperature on the H2 Separation Potential of Hydroxy Sodalite Zeolite Membranes [Volume 1, Issue 4, 2014, Pages 209-214]
I
-
Impregnation reduction method
Preparation and Characterization of Electrocatalyst Nanoparticles for Direct Methanol Fuel Cell Applications Using β-D-glucose as Protection Agent [Volume 4, Issue 1, 2017, Pages 1-11]
-
Infiltration
The effect of copper infiltration on LSM Cathode microstructure in high temperature solid oxide fuel cells [Volume 10, Issue 4, 2023, Pages 281-290]
-
Injection duration
Thermoexergetic analysis of common rail direct injection diesel engine on optimized multiple injection strategy of performance and emission using congress grass tamarind shell co-pyrolysis oil blend and diesel [Volume 11, Issue 2, 2024, Pages 78-94]
-
Injection timing
Thermoexergetic analysis of common rail direct injection diesel engine on optimized multiple injection strategy of performance and emission using congress grass tamarind shell co-pyrolysis oil blend and diesel [Volume 11, Issue 2, 2024, Pages 78-94]
-
Input-output feedback linearization
A sensorless adaptive non-linear control scheme for minimizing the stator energy losses of IPMSM [Volume 11, Issue 2, 2024, Pages 131-141]
-
In situ activation
In situ activation of a Ni catalyst with Mo ion for hydrogen evolution reaction in alkaline solution [Volume 3, Issue 2, 2016, Pages 151-158]
-
Interconnect
Electrophoretic deposition of MnCr2O4 coating for solid oxide fuel cell metallic interconnects [Volume 1, Issue 1, 2014, Pages 21-26]
-
Interleaved
A New ZVT Interleaved High Step-up Converter with Ripple Cancelation for Photovoltaic Systems [(Articles in Press)]
-
Internal Reforming
Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]
-
IPMSM
A sensorless adaptive non-linear control scheme for minimizing the stator energy losses of IPMSM [Volume 11, Issue 2, 2024, Pages 131-141]
-
Isotherm
Prediction the hydrogen adsorption isotherm on nickel decorated carbon nanotubes by applying artificial neural network modeling [Volume 8, Issue 2, 2021, Pages 61-68]
-
Isothermal
Numerical investigation of methanol crossover through the membrane in a direct methanol fuel cell [Volume 5, Issue 1, 2018, Pages 21-33]
J
-
Joule-Thomson
How to Design a Cryogenic Joule-Thomson Cooling System: Case Study of Small Hydrogen Liquefier [Volume 3, Issue 2, 2016, Pages 113-125]
-
Joule-Thomson
Influence of unsuitable operational conditions on the transient performance of a small hydrogen liquefier [Volume 3, Issue 3, 2016, Pages 199-212]
K
-
Kalina cycle
Thermodynamic and exergoeconomic evaluation of waste heat recovery for hydrogen production in a CCHP system [Volume 9, Issue 1, 2022, Pages 53-68]
-
Key words: Microbial fuel cell (MFC)
Sulfurous Analysis of Bioelectricity Generation from Sulfate-reducing Bacteria (SRB) in a Microbial Fuel Cell [Volume 4, Issue 4, 2017, Pages 307-321]
-
Kinetics Desorption
Kinetic study of CO desorption from cathodic electrochemically treated carbon paper supported Pt electrodes [Volume 4, Issue 3, 2017, Pages 201-207]
L
-
La2Ce2O7 nanoparticles
Novel PVA/La2Ce2O7 hybrid nanocomposite membranes for application in proton exchange membrane fuel cells [Volume 1, Issue 2, 2014, Pages 105-112]
-
LaNi5
"Physical properties and electronic structure of LaNi5 compound before and after hydrogenation: An experimental and theoretical approach" [Volume 1, Issue 1, 2014, Pages 27-39]
-
Lattice Boltzmann Method
Lattice Boltzmann modeling of two component gas diffusion in solid oxide fuel cell [Volume 2, Issue 4, 2015, Pages 263-270]
-
Lattice Boltzmann Method
Lattice Boltzmann simulation of water transfer in gas diffusion layers with porosity gradient of polymer electrolyte membrane fuel cells with parallel processing on GPU [Volume 7, Issue 1, 2020, Pages 45-60]
-
Lattice Boltzmann Method
Lattice Boltzmann Modeling of Methane Steam Reforming Reactions in Solid Oxide Fuel Cells [Volume 7, Issue 1, 2020, Pages 61-79]
-
Layered double hydroxides
Application of Pd-Substituted Ni-Al Layered Double Hydroxides for the Hydrogen Evolution Reaction [Volume 2, Issue 4, 2015, Pages 253-261]
-
Lead-Acid Battery
Experimental Investigation of a High Efficiency Power Path Controller for PEM Fuel Cell and Battery Hybrid System [Volume 9, Issue 2, 2022, Pages 149-161]
-
Li--ion batteries
Extremely Fast Simulation of the Li--Ion Batteries Governing Equations [Volume 10, Issue 4, 2023, Pages 339-353]
-
Lithium
Lithium-oxygen charge transfer interaction: a deformation density analysis study [Volume 11, Issue 2, 2024, Pages 117-122]
-
Lithium-ion batteries
Optimum calcination temperature for the synthesis of nanostructured alumina for energy storage heat management applications [Volume 11, Issue 1, 2024, Pages 8-18]
-
Lithium-ion battery (LIB)
A high performance lithium-ion battery using LiNa0.02K0.01FePO4/C as cathode material and anatase TiO2 nanotube arrays as anode material [Volume 4, Issue 1, 2017, Pages 27-35]
-
Lithium iron phosphate
A high performance lithium-ion battery using LiNa0.02K0.01FePO4/C as cathode material and anatase TiO2 nanotube arrays as anode material [Volume 4, Issue 1, 2017, Pages 27-35]
-
Load frequency control
Comparison and Analysis of Dynamic Behavior of Load Frequency Control in Power System with Steam, Hydro and Gas Power Plants [Volume 10, Issue 4, 2023, Pages 311-325]
-
Load frequency control
Small signal stability analysis and frequency control in a single-area multi-source electrical energy system [Volume 11, Issue 2, 2024, Pages 107-116]
-
Long-term test
Experimental Study of Oxidant Effect on Lifetime of PEM Fuel Cell [Volume 7, Issue 1, 2020, Pages 33-43]
-
LOX Tank
Energy Management Simulation in a PEM Fuel Cell System [Volume 2, Issue 1, 2015, Pages 1-6]
-
LPG
Hydrogen production via steam reforming of LPG on Ni/Zeolite catalysts [Volume 1, Issue 4, 2014, Pages 233-238]
-
LSCF
La0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study [Volume 1, Issue 4, 2014, Pages 239-246]
-
LSM Cathode
The effect of copper infiltration on LSM Cathode microstructure in high temperature solid oxide fuel cells [Volume 10, Issue 4, 2023, Pages 281-290]
M
-
Mass transfer
Modeling of mass transfer in a T-shaped microfluidic fuel cell [Volume 10, Issue 2, 2023, Pages 147-156]
-
Mathematics Modeling
New Mathematical Modelling and Dynamic Simulation of a Molten Carbonate Fuel Cell [Volume 2, Issue 4, 2015, Pages 241-252]
-
MCFC
Energy and economic comparison of SOFC-GT, MCFC-GT, and SOFC-MCFC-GT hybrid systems [Volume 4, Issue 4, 2017, Pages 275-287]
-
MCO Spine, Sol-ge,
Synthesis and characterization of nanostructured Cux (Mn1.5-x/2Co1.5-x/2)O4 as an interconnect coating for solid oxide fuel cell [Volume 8, Issue 1, 2021, Pages 35-41]
-
MEA
The effect of vertical injection of reactants to the membrane electrode assembly on the performance of a PEM fuel cell [Volume 3, Issue 3, 2016, Pages 167-182]
-
Membrane electrode assembly
Developed endplate geometry for uniform contact pressure distribution over PEMFC active area [Volume 7, Issue 1, 2020, Pages 1-12]
-
Membrane energy exchanger
Parametric study of a membrane energy exchanger based on energy, entropy, and exergy analysis for proton exchange membrane fuel cell application [Volume 11, Issue 3, 2024, Pages 153-168]
-
Membrane recovery
Palladium composite membrane with high reversibility of CO2 poisoning [Volume 5, Issue 1, 2018, Pages 13-19]
-
Metal-Air Battery
Metal‐organic framework‐derived Cu@Co4N nanoparticles anchored on N-doped carbon nanotubes for efficient and stable ORR activity [Volume 10, Issue 4, 2023, Pages 327-337]
-
Metal forming
Numerical-experimental study on the thickness distribution of metallic bipolar plates for PEM fuel cells [Volume 9, Issue 1, 2022, Pages 1-18]
-
Metal forming
Study of the forming process effects on the wrinkling and thinning percentage of the micro-channels with serpentine layout [Volume 10, Issue 1, 2023, Pages 81-93]
-
Metal-free catalyst
Facile Synthesis of N, S-Doped Graphene from Sulfur Trioxide Pyridine Precursor for the Oxygen Reduction Reaction [Volume 4, Issue 3, 2017, Pages 231-240]
-
Metal Hydride
Energy Management Simulation in a PEM Fuel Cell System [Volume 2, Issue 1, 2015, Pages 1-6]
-
Metal Hydride
Mechanical behavior of metal hydrides and hydrogen storage containers: A review [Volume 10, Issue 3, 2023, Pages 257-278]
-
Metal hydride hydrogen storage
Transient Three-dimensional Simulation of a Metal Hydride Hydrogen Storage Tank Interconnected to a PEM Fuel Cell by Heat Pipes [Volume 6, Issue 2, 2019, Pages 117-132]
-
Metallic bipolar plate
Numerical-experimental study on the thickness distribution of metallic bipolar plates for PEM fuel cells [Volume 9, Issue 1, 2022, Pages 1-18]
-
Metal-Organic Frameworks
Metal‐organic framework‐derived Cu@Co4N nanoparticles anchored on N-doped carbon nanotubes for efficient and stable ORR activity [Volume 10, Issue 4, 2023, Pages 327-337]
-
Metal oxide
Methanol steam reforming; Effects of various metal oxides on the properties of a Cu-based catalyst [Volume 3, Issue 4, 2016, Pages 291-299]
-
Methanation
A comparative study on the kinetics of carbon dioxide methanation over bimetallic and monometallic catalysts [Volume 3, Issue 1, 2016, Pages 59-71]
-
Methane
An Experimental Investigation on Simultaneous Effects of Oxygen Ratio and Flow-Rate in SOFCs Performance Fueled by a Mixture of Methane and Oxygen [Volume 6, Issue 1, 2019, Pages 11-22]
-
Methane Steam Reforming
Simulation of a Solid Oxide Fuel Cell with External Steam Methane Reforming and Bypass [Volume 4, Issue 2, 2017, Pages 103-118]
-
Methane Steam Reforming
Lattice Boltzmann Modeling of Methane Steam Reforming Reactions in Solid Oxide Fuel Cells [Volume 7, Issue 1, 2020, Pages 61-79]
-
Methanol
Exergy and Energy Analysis of Effective Utilization of Carbon Dioxide in the Gas-to-Methanol Process [Volume 7, Issue 1, 2020, Pages 13-31]
-
Methanol oxidation reaction
Electrochemical evaluation of electrodeposited platinum on a modified carbon substrate with cobalt, nickel and copper doped zinc oxide for the methanol oxidation reaction [Volume 5, Issue 1, 2018, Pages 49-55]
-
Methanol steam reforming
Effect of Sorbitol/Oxidizer Ratio on Microwave Assisted Solution Combustion Synthesis of Copper Based Nanocatalyst for Fuel Cell Grade Hydrogen Production [Volume 2, Issue 4, 2015, Pages 227-240]
-
Methanol steam reforming
Methanol steam reforming; Effects of various metal oxides on the properties of a Cu-based catalyst [Volume 3, Issue 4, 2016, Pages 291-299]
-
Methanol-Steam Reforming
Simulation of integrated purification systems for hydrogen production in methanol steam reforming process [Volume 10, Issue 3, 2023, Pages 158-199]
-
Microbial desalination cell
Effect of batch vs. continuous mode of operation on microbial desalination cell performance treating municipal wastewater [Volume 3, Issue 4, 2016, Pages 281-290]
-
Microbial electrolysis cell
Modeling of Multi-population Microbial Fuel and Electrolysis Cells Based on the Bioanode Potential Conditions [Volume 1, Issue 4, 2014, Pages 247-260]
-
Microbial electrolysis cell
The significance of key operational variables to the enhancement of hydrogen production in a single-chamber microbial electrolysis cell (MEC) [Volume 2, Issue 2, 2015, Pages 85-97]
-
Microbial fuel cell
Modeling of Multi-population Microbial Fuel and Electrolysis Cells Based on the Bioanode Potential Conditions [Volume 1, Issue 4, 2014, Pages 247-260]
-
Microbial fuel cell
Implementation of Chitosan modified ultrafiltration hollow fiber as proton exchange membrane of ml-scale microbial fuel cells [Volume 10, Issue 4, 2023, Pages 299-310]
-
Micro-Channel Reactor
Steam Reforming Integrated with Oxidation of Methanol in a Micro-Channel Reactor with Different Micro-Baffle Shapes [Volume 2, Issue 2, 2015, Pages 75-83]
-
Microgrid
A brief review on the application of the virtual impedance method in islanded alternating current microgrids to control reactive power sharing [Volume 11, Issue 3, 2024, Pages 189-204]
-
Microstructure optimization
A new approach to microstructure optimization of solid oxide fuel cell electrodes [Volume 4, Issue 2, 2017, Pages 93-102]
-
Microstructures
Nickel oxide-gadolinium doped ceria synthesized by new methods as anodes material for solid oxide fuel cells [Volume 9, Issue 2, 2022, Pages 133-147]
-
Microwave Combustion
Effect of Sorbitol/Oxidizer Ratio on Microwave Assisted Solution Combustion Synthesis of Copper Based Nanocatalyst for Fuel Cell Grade Hydrogen Production [Volume 2, Issue 4, 2015, Pages 227-240]
-
Mm(NiCoMnAl)5 alloy
Synthesis, characterization and hydrogen storage properties of Mm(Ni,Co,Mn,Al)5 alloy [Volume 1, Issue 2, 2014, Pages 83-94]
-
M-N-C Catalysts
Metal‐organic framework‐derived Cu@Co4N nanoparticles anchored on N-doped carbon nanotubes for efficient and stable ORR activity [Volume 10, Issue 4, 2023, Pages 327-337]
-
Mn-Co spinel
Synthesis and characterization of Ag-Y co-doped Mn-Co spinel for solid oxide fuel cell application [Volume 8, Issue 1, 2021, Pages 43-49]
-
Modal analysis
Experimental study and numerical modeling of vibrational characteristics of a 500W PEM fuel cell stack [Volume 9, Issue 1, 2022, Pages 39-52]
-
Modeling
Hydrogen production by steam reforming of dimethyle ether over Cu/ZnO/Al2O3 and H-ZSM-5 catalysts: An experimental and modeling study [Volume 1, Issue 3, 2014, Pages 153-161]
-
Modeling
Modeling heat and mass transfer in laminar forced flow between parallel plates channel imposed to suction or injection [Volume 2, Issue 1, 2015, Pages 35-46]
-
Modeling
Three-dimensional modeling of transport phenomena in a planar anode-supported solid oxide fuel cell [Volume 4, Issue 1, 2017, Pages 37-52]
-
Modeling
Dynamic investigation of hydrocarbon proton exchange membrane Fuel Cell [Volume 4, Issue 3, 2017, Pages 219-230]
-
Modeling
Silica membrane performance for hydrogen separation from methanol steam reforming products: Assessment of different multistage membrane schemes [Volume 6, Issue 1, 2019, Pages 59-70]
-
Modified carbon paste electrode
Electrocatalytic oxidation of glucose on the modified carbon paste electrode with sodalite nanozeolite for fuel cell [Volume 2, Issue 1, 2015, Pages 47-58]
-
Molten Carbonate
New Mathematical Modelling and Dynamic Simulation of a Molten Carbonate Fuel Cell [Volume 2, Issue 4, 2015, Pages 241-252]
-
Molten Carbonate Fuel Cell
Exergy Analysis of a Molten Carbonate Fuel Cell-Turbo Expander-Steam Turbine Hybrid Cycle [Volume 3, Issue 4, 2016, Pages 267-279]
-
Multigeneation system
Analysis and performance evaluation of a multigeneration system applying PV/T and PTC solar collectors from hydrogen and freshwater production point of view [Volume 11, Issue 3, 2024, Pages 205-214]
-
Multigeneration system
Thermodynamic investigation of applying a thermoelectric generator to produce hydrogen in a multigeneration system [Volume 10, Issue 2, 2023, Pages 131-145]
-
Multigeneration system
Thermodynamic and thermoeconomic analysis of a multigeneration system using solar and geothermal energies [(Articles in Press)]
-
Multi-Walled Carbon Nanotubes
Multi-walled carbon nanotubes supported palladium nanoparticles: Synthesis, characterization and catalytic activity towards methanol electro oxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 67-74]
N
-
Nanobelt Arrays
Highly Ordered Nanoporous β-Ni(OH)2 Nanobelt Array Architectures as Electrode Material for Electrochemical Capacitors: Design, Synthesis, Characterization and Supercapacitive Evaluation [Volume 10, Issue 2, 2023, Pages 157-171]
-
Nanocomposite
Synthesis and electrochemical characterization of Graphene-Polyallylamine Nanocomposites as a New Supports of Pt Catalyst for Direct Methanol Fuel Cell Application [Volume 6, Issue 2, 2019, Pages 141-161]
-
Nanocomposite membranes
Novel PVA/La2Ce2O7 hybrid nanocomposite membranes for application in proton exchange membrane fuel cells [Volume 1, Issue 2, 2014, Pages 105-112]
-
Nanocrystalline
Optimization of Preparation Factors for Cerium Oxide Synthesis as a Support for CO PrOx Catalyst [Volume 1, Issue 3, 2014, Pages 189-197]
-
Nanocrystalline
Investigation of the catalytic performance and coke formation of nanocrystalline Ni/SrO-Al2O3 catalyst in dry reforming of methane [Volume 3, Issue 4, 2016, Pages 315-322]
-
Nanofluid
Thermodynamic investigation of a solar-based multigeneration system using AL2O3-Thermonol VP1 nanofluid [(Articles in Press)]
-
Nanofluids
Thermodynamic investigation of applying a thermoelectric generator to produce hydrogen in a multigeneration system [Volume 10, Issue 2, 2023, Pages 131-145]
-
Nano-sized catalyst
Optimization of the preparation procedure of Ni/Al2O3 catalyst for steam reforming of n-butane [Volume 2, Issue 3, 2015, Pages 139-149]
-
Nano-size zirconia
Hydrothermal synthesis of nano-size zirconia using commercial zirconia powder: process optimization through response surface methodology [Volume 1, Issue 3, 2014, Pages 163-173]
-
Nanostructured silica sublayers
Nanostructured Palladium-Doped Silica Membrane Layer Synthesis for Hydrogen Separation: Effect of Activated Sublayers [Volume 6, Issue 1, 2019, Pages 1-9]
-
Natural frequency
Experimental study and numerical modeling of vibrational characteristics of a 500W PEM fuel cell stack [Volume 9, Issue 1, 2022, Pages 39-52]
-
Natural gas
Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]
-
Nernst Equation
Integration of a Vanadium Redox Flow Battery with a Proton Exchange Membrane Fuel Cell as an Energy Storage System [Volume 4, Issue 1, 2017, Pages 53-68]
-
Ni/Al2O3
Optimization of the preparation procedure of Ni/Al2O3 catalyst for steam reforming of n-butane [Volume 2, Issue 3, 2015, Pages 139-149]
-
Nickel catalyst
Effect of K2O on the catalytic performance of Ni catalysts supported on nanocrystalline Al2O3 in CO2 reforming of methane [Volume 2, Issue 4, 2015, Pages 215-226]
-
Nickel catalyst
A comparative study on the kinetics of carbon dioxide methanation over bimetallic and monometallic catalysts [Volume 3, Issue 1, 2016, Pages 59-71]
-
Nickel catalyst
Investigation of the catalytic performance and coke formation of nanocrystalline Ni/SrO-Al2O3 catalyst in dry reforming of methane [Volume 3, Issue 4, 2016, Pages 315-322]
-
Ni(II) complex
Nickel oxide-gadolinium doped ceria synthesized by new methods as anodes material for solid oxide fuel cells [Volume 9, Issue 2, 2022, Pages 133-147]
-
Ni P C
Effect of temperature on kinetics of the hydrogen evolution reaction on Ni-P-C cathodes in alkaline solution [Volume 1, Issue 4, 2014, Pages 215-222]
-
Ni-P-CeO2
Preparation of Ni-P-CeO2 electrode and study on electrocatalytic properties for hydrogen evolution reaction [Volume 5, Issue 1, 2018, Pages 1-11]
-
Ni@Pt nanoparticles
Ni@Pt core-shell nanoparticles as an improved electrocatalyst for ethanol electrooxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 109-119]
-
Ni/ zeolite catalyst
Hydrogen production via steam reforming of LPG on Ni/Zeolite catalysts [Volume 1, Issue 4, 2014, Pages 233-238]
-
Non isothermal
Modeling and Optimization of non - isothermal two- phase flow in the cathode gas diffusion layer of PEM fuel cell [Volume 2, Issue 3, 2015, Pages 159-168]
-
Numerical modeling
Steam Reforming Integrated with Oxidation of Methanol in a Micro-Channel Reactor with Different Micro-Baffle Shapes [Volume 2, Issue 2, 2015, Pages 75-83]
-
Numerical modeling
The effect of vertical injection of reactants to the membrane electrode assembly on the performance of a PEM fuel cell [Volume 3, Issue 3, 2016, Pages 167-182]
O
-
Online Simulation of Li-ion batteries
Extremely Fast Simulation of the Li--Ion Batteries Governing Equations [Volume 10, Issue 4, 2023, Pages 339-353]
-
Open-Foam
Modeling of mass transfer in a T-shaped microfluidic fuel cell [Volume 10, Issue 2, 2023, Pages 147-156]
-
Optimal Intelligent Control
Optimal Intelligent Control of Plug-in Fuel Cell Electric Vehicles in Smart Electric Grids [Volume 1, Issue 1, 2014, Pages 55-64]
-
Optimization
Modeling and Optimization of non - isothermal two- phase flow in the cathode gas diffusion layer of PEM fuel cell [Volume 2, Issue 3, 2015, Pages 159-168]
-
Optimization
Optimization of the preparation procedure of Ni/Al2O3 catalyst for steam reforming of n-butane [Volume 2, Issue 3, 2015, Pages 139-149]
-
Optimization
Performance assessment of a SOFC cogeneration system for residential buildings located in eastern Iran [Volume 3, Issue 2, 2016, Pages 81-97]
-
Optimization
Design and Investigation of Honeycomb End Plates for PEM Fuel Cells [Volume 4, Issue 3, 2017, Pages 189-199]
-
Optimization
Thermoexergetic analysis of common rail direct injection diesel engine on optimized multiple injection strategy of performance and emission using congress grass tamarind shell co-pyrolysis oil blend and diesel [Volume 11, Issue 2, 2024, Pages 78-94]
-
Optimization
Multi-objective optimization of a combined heat and power (CHP) cycle with a solar collector: energy, exergy and economic point of view [Volume 11, Issue 2, 2024, Pages 95-106]
-
Optimization simulation
Three-dimensional modeling of transport phenomena in a planar anode-supported solid oxide fuel cell [Volume 4, Issue 1, 2017, Pages 37-52]
-
ORC
Comparison of waste heat recovery from a Proton Exchange Membrane fuel cell by gas turbine or Organic Rankin Cycle: a display of 3E analysis [Volume 8, Issue 2, 2021, Pages 103-112]
-
ORC
Performance assessment of a power/refrigeration cogeneration system driven by the waste heat of a solid oxide fuel cell [Volume 10, Issue 3, 2023, Pages 241-256]
-
Organic Rankine cycle (ORC)
Assessment of a novel photovoltaic-electrolyzer-fuel cell-ORC hybrid energy system for hydrogen and power production [Volume 10, Issue 2, 2023, Pages 111-130]
-
ORR
One –step synthesis of PdCo alloy nanoparticles decorated on reduced grahene oxide as an Electro-catalyst for Oxygen Reduction Reaction in Passive Direct Methanol Fuel Cells [Volume 2, Issue 1, 2015, Pages 27-33]
-
Oxidant Type
Experimental Study of Oxidant Effect on Lifetime of PEM Fuel Cell [Volume 7, Issue 1, 2020, Pages 33-43]
-
Oxidation
Reforming Integrated with Oxidation in Micro-Heat Exchanger Reactor with Circular Micro-Channels [Volume 1, Issue 2, 2014, Pages 65-74]
-
Oxidation
Lithium-oxygen charge transfer interaction: a deformation density analysis study [Volume 11, Issue 2, 2024, Pages 117-122]
-
Oxidation resistance
Electrophoretic deposition of MnCr2O4 coating for solid oxide fuel cell metallic interconnects [Volume 1, Issue 1, 2014, Pages 21-26]
-
Oxidation resistance
Co3O4 spinel protection coating for solid oxide fuel cell interconnect application [Volume 1, Issue 2, 2014, Pages 121-131]
-
Oxygen
Lithium-oxygen charge transfer interaction: a deformation density analysis study [Volume 11, Issue 2, 2024, Pages 117-122]
-
Oxygen reduction reaction
Oxygen reduction reaction on Pt/C at the presence of super paramagnetic of Fe3O4 nanoparticles for PEMFCs [Volume 1, Issue 1, 2014, Pages 41-46]
-
Oxygen reduction reaction
Single walled carbon nanotube in the reaction layer of gas diffusion electrode for oxygen reduction reaction [Volume 1, Issue 2, 2014, Pages 75-82]
-
Oxygen reduction reaction
Preparation of Nitrogen-Doped Graphene By Solvothermal Process as Supporting Material for Fuel Cell Catalysts [Volume 1, Issue 2, 2014, Pages 113-119]
-
Oxygen reduction reaction
Using the Palladium as core and Platinum as shell for ORR [Volume 1, Issue 3, 2014, Pages 133-139]
-
Oxygen reduction reaction
Electrodeposition of platinum nanoparticles on reduced graphene oxide as an efficient catalyst for oxygen reduction reaction [Volume 2, Issue 1, 2015, Pages 7-12]
-
Oxygen reduction reaction
Synthesis of Supported Pt Alloy three Dimensional Rhombus Shapes Nanoparticles for Oxygen Reduction Reaction [Volume 2, Issue 2, 2015, Pages 121-130]
-
Oxygen reduction reaction
Facile Synthesis of N, S-Doped Graphene from Sulfur Trioxide Pyridine Precursor for the Oxygen Reduction Reaction [Volume 4, Issue 3, 2017, Pages 231-240]
-
Oxygen reduction reaction
Effect of Solution Dielectric Constant on the Preparation of Gas Diffusion Electrode Reaction Layer for the Oxygen Reduction Reaction [Volume 10, Issue 2, 2023, Pages 97-109]
-
Oxygen reduction reaction
Evaluation of electrocatalytic performance of PtCo/C nanoparticles in different proportions of cobalt for oxygen reduction reaction [Volume 10, Issue 4, 2023, Pages 291-297]
-
Oxygen reduction reaction
Metal‐organic framework‐derived Cu@Co4N nanoparticles anchored on N-doped carbon nanotubes for efficient and stable ORR activity [Volume 10, Issue 4, 2023, Pages 327-337]
-
Oxygen reduction reaction
Chemical kinetics analysis of a zinc-air fuel cell [Volume 11, Issue 1, 2024, Pages 39-45]
P
-
Palladium
Palladium nanoparticles supported on carbon black powder as an effective anodic catalyst for application in a direct glucose alkaline fuel cell [Volume 3, Issue 1, 2016, Pages 11-17]
-
Palladium composite membrane
Determination of thermodynamic parameters of hydrogen permeation of palladium membrane for considering the effect of stainless steel support [Volume 1, Issue 1, 2014, Pages 1-10]
-
Palladium-doped
Nanostructured Palladium-Doped Silica Membrane Layer Synthesis for Hydrogen Separation: Effect of Activated Sublayers [Volume 6, Issue 1, 2019, Pages 1-9]
-
Palladium membrane
Palladium composite membrane with high reversibility of CO2 poisoning [Volume 5, Issue 1, 2018, Pages 13-19]
-
Palladium nanoparticles
Multi-walled carbon nanotubes supported palladium nanoparticles: Synthesis, characterization and catalytic activity towards methanol electro oxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 67-74]
-
Parametric study
Parametric study of the influence of cooling channel dimensions on PEM fuel cell thermal performance [Volume 4, Issue 4, 2017, Pages 265-274]
-
Pd
Using the Palladium as core and Platinum as shell for ORR [Volume 1, Issue 3, 2014, Pages 133-139]
-
Pd-based membrane
Modeling and simulation of the fluid dynamic and performance of the Pd-based membrane by CFD for hydrogen separation [Volume 9, Issue 1, 2022, Pages 19-25]
-
Pd-Co nanoparticles
One –step synthesis of PdCo alloy nanoparticles decorated on reduced grahene oxide as an Electro-catalyst for Oxygen Reduction Reaction in Passive Direct Methanol Fuel Cells [Volume 2, Issue 1, 2015, Pages 27-33]
-
Pd membrane
Preparation of Pd composite membrane via organic-inorganic activation method in electroless plating technique [Volume 2, Issue 3, 2015, Pages 151-158]
-
Pd nanoparticles, Intermediate layer
Preparation of Pd composite membrane via organic-inorganic activation method in electroless plating technique [Volume 2, Issue 3, 2015, Pages 151-158]
-
Pd substitution
Application of Pd-Substituted Ni-Al Layered Double Hydroxides for the Hydrogen Evolution Reaction [Volume 2, Issue 4, 2015, Pages 253-261]
-
PEM
Investigation of vessels pressure effect on PEM electrolyzer performance by using a new OneDimensional Dynamic Model [Volume 2, Issue 4, 2015, Pages 271-281]
-
PEM
Comparison of waste heat recovery from a Proton Exchange Membrane fuel cell by gas turbine or Organic Rankin Cycle: a display of 3E analysis [Volume 8, Issue 2, 2021, Pages 103-112]
-
PEM
Investigation of a Fuel Cell (FC) system for vehicle [(Articles in Press)]
-
PEM electrolyzer
Thermodynamic and exergoeconomic evaluation of waste heat recovery for hydrogen production in a CCHP system [Volume 9, Issue 1, 2022, Pages 53-68]
-
PEM electrolyzer
Thermodynamic evaluation of a novel geothermal and solar-driven multigeneration system for hydrogen and freshwater production [Volume 10, Issue 1, 2023, Pages 51-67]
-
PEM electrolyzer
Thermodynamic and thermoeconomic analysis of a multigeneration system using solar and geothermal energies [(Articles in Press)]
-
PEMFC
Development and Simulation of a PEM Fuel Cell model for Prediction of Water Content and Power Generation [Volume 4, Issue 4, 2017, Pages 289-299]
-
PEMFC
Buckypaper-based catalytic electrode containing graphene nanoplates and ZrO2 nanorod composite to improve PEMFC performance [Volume 5, Issue 1, 2018, Pages 57-69]
-
PEMFC
A review of the main mechanisms of catalyst layer degradation in polymer electrolyte membrane fuel cell (PEMFC) and different performance recovery methods [Volume 6, Issue 2, 2019, Pages 91-115]
-
PEMFC
Study of the forming process effects on the wrinkling and thinning percentage of the micro-channels with serpentine layout [Volume 10, Issue 1, 2023, Pages 81-93]
-
PEMFC stack
Study of Contact Pressure Distribution over MEA of the Three-Cell PEMFC with Metallic Bipolar Plates [Volume 10, Issue 1, 2023, Pages 69-79]
-
PEM fuel cell
Novel PVA/La2Ce2O7 hybrid nanocomposite membranes for application in proton exchange membrane fuel cells [Volume 1, Issue 2, 2014, Pages 105-112]
-
PEM fuel cell
Performance Improvement of PEM Fuel Cells Using Air Channel Indentation; Part I: Mechanisms to Enrich Oxygen Concentration in Catalyst Layer [Volume 1, Issue 4, 2014, Pages 199-207]
-
PEM fuel cell
Numerical analysis of reactant transport in the novel tubular polymer electrolyte membrane fuel cells [Volume 2, Issue 3, 2015, Pages 181-196]
-
PEM fuel cell
Modeling and Optimization of non - isothermal two- phase flow in the cathode gas diffusion layer of PEM fuel cell [Volume 2, Issue 3, 2015, Pages 159-168]
-
PEM fuel cell
Modeling and experimental study on the sealing gasket of proton exchange membrane fuel cells [Volume 3, Issue 3, 2016, Pages 213-220]
-
PEM fuel cell
The effect of vertical injection of reactants to the membrane electrode assembly on the performance of a PEM fuel cell [Volume 3, Issue 3, 2016, Pages 167-182]
-
PEM fuel cell
The Impact of Wettability on Effective Properties of Cathode Catalyst Layer in a Proton Exchange Membrane Fuel Cell [Volume 3, Issue 3, 2016, Pages 233-245]
-
PEM fuel cell
The effect of increasing the multiplicity of flow fields contact surface on the performance of PEM fuel cell [Volume 4, Issue 1, 2017, Pages 69-83]
-
PEM fuel cell
Finite Element Simulation and ANFIS Prediction of Dimensional Error Effect on distribution of BPP/GDL Contact Pressure in PEM Fuel Cell [Volume 4, Issue 2, 2017, Pages 125-138]
-
PEM fuel cell
Effect of CO in the reformatted fuel on the performance of Polymer Electrolyte Membrane (PEM) fuel cell [Volume 4, Issue 2, 2017, Pages 153-165]
-
PEM fuel cell
Design and Investigation of Honeycomb End Plates for PEM Fuel Cells [Volume 4, Issue 3, 2017, Pages 189-199]
-
PEM fuel cell
Kinetic study of CO desorption from cathodic electrochemically treated carbon paper supported Pt electrodes [Volume 4, Issue 3, 2017, Pages 201-207]
-
PEM fuel cell
Numerical study on the performance prediction of a proton exchange membrane (PEM) fuel cell [Volume 4, Issue 4, 2017, Pages 249-263]
-
PEM fuel cell
Transient Three-dimensional Simulation of a Metal Hydride Hydrogen Storage Tank Interconnected to a PEM Fuel Cell by Heat Pipes [Volume 6, Issue 2, 2019, Pages 117-132]
-
PEM fuel cell
Lattice Boltzmann simulation of water transfer in gas diffusion layers with porosity gradient of polymer electrolyte membrane fuel cells with parallel processing on GPU [Volume 7, Issue 1, 2020, Pages 45-60]
-
PEM fuel cell
Experimental Study of Oxidant Effect on Lifetime of PEM Fuel Cell [Volume 7, Issue 1, 2020, Pages 33-43]
-
PEM fuel cell
Experimental Analysis of Fiber Laminating Effects on Flexural Rigidity of Composite Endplates for Use in PEM Fuel Cells [Volume 9, Issue 2, 2022, Pages 97-106]
-
PEM fuel cell
Numerical-experimental study on the Failure Behavior of Graphite-Based Composite Bipolar Plate for PEM fuel cells [Volume 9, Issue 2, 2022, Pages 107-116]
-
PEM fuel cell
Experimental Investigation of a High Efficiency Power Path Controller for PEM Fuel Cell and Battery Hybrid System [Volume 9, Issue 2, 2022, Pages 149-161]
-
PEM fuel cell
Mechanical and chemical characteristics of the PEM fuel cell sealants in simulated environment [Volume 9, Issue 2, 2022, Pages 163-178]
-
PEM fuel cell
A two-phase, non-isothermal model for water management in the cathode gas diffusion layer of polymer electrolyte membrane fuel cells [Volume 10, Issue 3, 2023, Pages 215-231]
-
PEM fuel cell
The Effect of Pre- Stretching Treatment on the Microstructure, Mechanical Properties and Corrosion Resistance of 7075 Aluminum Alloy used in PEMFC [Volume 10, Issue 3, 2023, Pages 233-239]
-
PEM fuel cell
New criterion for achieving efficient flow fields in PEM fuel cells [Volume 11, Issue 1, 2024, Pages 46-67]
-
PEM Fuel Cell (PEMFC)
Electrochemical Impedance Spectroscopy for Investigation of Different Losses in 4-cells Short Stack with Integrated Humidifier and Water Separator [Volume 3, Issue 2, 2016, Pages 127-136]
-
PEM Fuel Cell (PEMFC)
Assessment of a novel photovoltaic-electrolyzer-fuel cell-ORC hybrid energy system for hydrogen and power production [Volume 10, Issue 2, 2023, Pages 111-130]
-
PEM fuel cells
The effect of inclined radial flow in proton exchange membrane fuel cells performance [Volume 1, Issue 3, 2014, Pages 141-152]
-
PEM fuel cells
The simulation of novel annular shape on the Performance in Proton Exchange Membrane Fuel Cell [Volume 1, Issue 3, 2014, Pages 175-188]
-
PEM fuel cells
Modeling and simulation of a new architecure stack applied on the PEM Fuel Cell [Volume 3, Issue 2, 2016, Pages 99-112]
-
PEM Fuel Cell Stack
Energy Management Simulation in a PEM Fuel Cell System [Volume 2, Issue 1, 2015, Pages 1-6]
-
Performance
Numerical study on the performance prediction of a proton exchange membrane (PEM) fuel cell [Volume 4, Issue 4, 2017, Pages 249-263]
-
Performance
Performance verification of a laboratory scale hydrogen/oxygen combustion chamber [Volume 9, Issue 1, 2022, Pages 27-38]
-
Performance Enhancement
Performance Improvement of PEM Fuel Cells Using Air Channel Indentation; Part I: Mechanisms to Enrich Oxygen Concentration in Catalyst Layer [Volume 1, Issue 4, 2014, Pages 199-207]
-
Performance evaluation criteria
New criterion for achieving efficient flow fields in PEM fuel cells [Volume 11, Issue 1, 2024, Pages 46-67]
-
Performance Prediction
Generalization of a CFD Model to Predict the Net Power in PEM Fuel Cells [Volume 6, Issue 1, 2019, Pages 23-37]
-
Permeability
Morphological and physical study of Cu-Ni sintered porous wicks used in heat pipes and fuel cells [Volume 3, Issue 4, 2016, Pages 255-266]
-
Photocatalyst
The effect of solvent of titanium precursor in the sol-gel process on the activity of TiO2 nanoparticles for H2 production [Volume 4, Issue 2, 2017, Pages 139-151]
-
Photonics conducting membrane
Preparation, characterization and the study of electrochemical behavior of Y-doped Bariumcerate powders by new precursors [Volume 10, Issue 1, 2023, Pages 1-10]
-
Photovoltaic Panel
Exergy-Economic Analysis of Combined Heat and Power System Utilizing Solar Energy and Biomass [(Articles in Press)]
-
Photovoltaics (PV) cell
Assessment of a novel photovoltaic-electrolyzer-fuel cell-ORC hybrid energy system for hydrogen and power production [Volume 10, Issue 2, 2023, Pages 111-130]
-
Photovoltaic system
A New ZVT Interleaved High Step-up Converter with Ripple Cancelation for Photovoltaic Systems [(Articles in Press)]
-
Pico hydro
Generating electricity using pico hydro-based power plant in Koohrang county, Iran: effect of energy storage type [Volume 11, Issue 1, 2024, Pages 19-38]
-
Platinum
Oxygen reduction reaction on Pt/C at the presence of super paramagnetic of Fe3O4 nanoparticles for PEMFCs [Volume 1, Issue 1, 2014, Pages 41-46]
-
Platinum
Electrodeposition of platinum nanoparticles on reduced graphene oxide as an efficient catalyst for oxygen reduction reaction [Volume 2, Issue 1, 2015, Pages 7-12]
-
Platinum
Evaluation of electrocatalytic performance of PtCo/C nanoparticles in different proportions of cobalt for oxygen reduction reaction [Volume 10, Issue 4, 2023, Pages 291-297]
-
Platinum electrodeposition
Electrochemical evaluation of electrodeposited platinum on a modified carbon substrate with cobalt, nickel and copper doped zinc oxide for the methanol oxidation reaction [Volume 5, Issue 1, 2018, Pages 49-55]
-
Platinum-Tungsten (PtW) Nanoparticles
Green in-situ Fabrication of PtW/Poly Ethylen Dioxy Thiophene/Graphene Nanoplates/Gas Diffusion Layer (PtW/ PEDOT /GNP/GDL) Electrode and its Electrocatalytic Property for Direct Methanol Fuel Cells Application [Volume 6, Issue 1, 2019, Pages 39-58]
-
Plug-in Electric Vehicle
Optimal Intelligent Control of Plug-in Fuel Cell Electric Vehicles in Smart Electric Grids [Volume 1, Issue 1, 2014, Pages 55-64]
-
Poisoning
Palladium composite membrane with high reversibility of CO2 poisoning [Volume 5, Issue 1, 2018, Pages 13-19]
-
Polarization
The effect of vertical injection of reactants to the membrane electrode assembly on the performance of a PEM fuel cell [Volume 3, Issue 3, 2016, Pages 167-182]
-
Polarization curve
Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization [Volume 3, Issue 3, 2016, Pages 183-197]
-
Poly Ethylen Dioxy Thiophene (PEDOT)
Green in-situ Fabrication of PtW/Poly Ethylen Dioxy Thiophene/Graphene Nanoplates/Gas Diffusion Layer (PtW/ PEDOT /GNP/GDL) Electrode and its Electrocatalytic Property for Direct Methanol Fuel Cells Application [Volume 6, Issue 1, 2019, Pages 39-58]
-
Polymer composite endplate
Experimental Analysis of Fiber Laminating Effects on Flexural Rigidity of Composite Endplates for Use in PEM Fuel Cells [Volume 9, Issue 2, 2022, Pages 97-106]
-
Polymer electrolyte membrane fuel cell
Numerical-experimental study on the thickness distribution of metallic bipolar plates for PEM fuel cells [Volume 9, Issue 1, 2022, Pages 1-18]
-
Polymer electrolyte membrane fuel cell
Experimental study and numerical modeling of vibrational characteristics of a 500W PEM fuel cell stack [Volume 9, Issue 1, 2022, Pages 39-52]
-
Polysulfone
Investigation of ion transport and water content properties in anion exchange membranes based on polysulfone for solid alkaline fuel cell application [Volume 2, Issue 1, 2015, Pages 13-25]
-
Poly(vinyl alcohol)
Novel PVA/La2Ce2O7 hybrid nanocomposite membranes for application in proton exchange membrane fuel cells [Volume 1, Issue 2, 2014, Pages 105-112]
-
Porosity
Morphological and physical study of Cu-Ni sintered porous wicks used in heat pipes and fuel cells [Volume 3, Issue 4, 2016, Pages 255-266]
-
Porous electrolyte
Numerical Investigation of a Hydrogen-fuelled Planar AP-SOFC Performance with Special Focus on Safe Operation [Volume 8, Issue 2, 2021, Pages 113-125]
-
Porous Media
Lattice Boltzmann modeling of two component gas diffusion in solid oxide fuel cell [Volume 2, Issue 4, 2015, Pages 263-270]
-
Porous stainless steel support
Determination of thermodynamic parameters of hydrogen permeation of palladium membrane for considering the effect of stainless steel support [Volume 1, Issue 1, 2014, Pages 1-10]
-
Power
Applying geothermal and solar energies for the thermodynamic estimation of the multigeneration system’s performance in producing power, freshwater and hydrogen [Volume 11, Issue 3, 2024, Pages 179-188]
-
Power density
Effect of batch vs. continuous mode of operation on microbial desalination cell performance treating municipal wastewater [Volume 3, Issue 4, 2016, Pages 281-290]
-
Power density
The effect of increasing the multiplicity of flow fields contact surface on the performance of PEM fuel cell [Volume 4, Issue 1, 2017, Pages 69-83]
-
Power density
Numerical study on the performance prediction of a proton exchange membrane (PEM) fuel cell [Volume 4, Issue 4, 2017, Pages 249-263]
-
Power sharing
A brief review on the application of the virtual impedance method in islanded alternating current microgrids to control reactive power sharing [Volume 11, Issue 3, 2024, Pages 189-204]
-
Pressure-composition isotherm
Synthesis, characterization and hydrogen storage properties of Mm(Ni,Co,Mn,Al)5 alloy [Volume 1, Issue 2, 2014, Pages 83-94]
-
Pressure drop
Parametric study of the influence of cooling channel dimensions on PEM fuel cell thermal performance [Volume 4, Issue 4, 2017, Pages 265-274]
-
Pressure drop
Quantitative study of water level control system in PEM fuel cell separator for conservation of reactant gases [Volume 8, Issue 1, 2021, Pages 1-12]
-
Pressure measurement film
Developed endplate geometry for uniform contact pressure distribution over PEMFC active area [Volume 7, Issue 1, 2020, Pages 1-12]
-
Pressure Swing Adsorption
Investigation of carbon dioxide capture from hydrogen using the thermal pressure swing adsorption process: Central composite design modeling [Volume 4, Issue 1, 2017, Pages 13-26]
-
Production
Iranian hydrogen production insight: research trends and outlook [Volume 8, Issue 1, 2021, Pages 23-33]
-
Protection agent
Preparation and Characterization of Electrocatalyst Nanoparticles for Direct Methanol Fuel Cell Applications Using β-D-glucose as Protection Agent [Volume 4, Issue 1, 2017, Pages 1-11]
-
Proton conductivity
Novel PVA/La2Ce2O7 hybrid nanocomposite membranes for application in proton exchange membrane fuel cells [Volume 1, Issue 2, 2014, Pages 105-112]
-
Proton exchange membrane
Studies on the SPEEK membrane with low degree of sulfonation as a stable proton exchange membrane for fuel cell applications [Volume 3, Issue 3, 2016, Pages 221-232]
-
Proton exchange membrane fuel cell
Oxygen reduction reaction on Pt/C at the presence of super paramagnetic of Fe3O4 nanoparticles for PEMFCs [Volume 1, Issue 1, 2014, Pages 41-46]
-
Proton exchange membrane fuel cell
Electrochemical Study of Hydrogen Adsorption/Reduction (HAR) Reaction on Graphene Oxide as Electrocatalyst for Proton Exchange Membrane Fuel Cells [Volume 2, Issue 2, 2015, Pages 99-107]
-
Proton exchange membrane fuel cell
Investigation and optimization of a PEM fuel cell’s electrical and mechanical behavior [Volume 3, Issue 1, 2016, Pages 1-10]
-
Proton exchange membrane fuel cell
Integration of a Vanadium Redox Flow Battery with a Proton Exchange Membrane Fuel Cell as an Energy Storage System [Volume 4, Issue 1, 2017, Pages 53-68]
-
Proton Exchange Membrane Fuel Cell (PEMFC)
Electrodeposition of platinum nanoparticles on reduced graphene oxide as an efficient catalyst for oxygen reduction reaction [Volume 2, Issue 1, 2015, Pages 7-12]
-
Proton Exchange Membrane Fuel Cells
Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]
-
PSA process
Simulation of integrated purification systems for hydrogen production in methanol steam reforming process [Volume 10, Issue 3, 2023, Pages 158-199]
-
Pt
Using the Palladium as core and Platinum as shell for ORR [Volume 1, Issue 3, 2014, Pages 133-139]
-
Pt
Effect of platinum on Ceria supported Cu catalysts for PrOx process in fuel processors [Volume 1, Issue 1, 2014, Pages 1-100]
-
Pt (100)
Interaction of atomic hydrogen with monometallic Au(100), Cu(100), Pt(100) surfaces and surface of bimetallic Au@Cu(100), Au@Pt(100) overlayer systems: The role of magnetism [Volume 4, Issue 3, 2017, Pages 209-218]
-
Pt/C
Chemical kinetics analysis of a zinc-air fuel cell [Volume 11, Issue 1, 2024, Pages 39-45]
-
PTC
Thermodynamic evaluation of a novel geothermal and solar-driven multigeneration system for hydrogen and freshwater production [Volume 10, Issue 1, 2023, Pages 51-67]
-
PtCo/C
Evaluation of electrocatalytic performance of PtCo/C nanoparticles in different proportions of cobalt for oxygen reduction reaction [Volume 10, Issue 4, 2023, Pages 291-297]
-
PTC solar collector
Analysis and performance evaluation of a multigeneration system applying PV/T and PTC solar collectors from hydrogen and freshwater production point of view [Volume 11, Issue 3, 2024, Pages 205-214]
-
PtFeCo alloy
Synthesis of Supported Pt Alloy three Dimensional Rhombus Shapes Nanoparticles for Oxygen Reduction Reaction [Volume 2, Issue 2, 2015, Pages 121-130]
-
Pt nanoparticles
Platinum nanoparticles/functionalized carbon nanoparticles composites supported on the carbon-ceramic electrode and their electroactivity for ethanol oxidation [Volume 5, Issue 1, 2018, Pages 35-47]
-
Purge time
Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization [Volume 3, Issue 3, 2016, Pages 183-197]
-
Purification system
Simulation of integrated purification systems for hydrogen production in methanol steam reforming process [Volume 10, Issue 3, 2023, Pages 158-199]
-
PVD Coating
Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]
-
PV/T solar collector
Analysis and performance evaluation of a multigeneration system applying PV/T and PTC solar collectors from hydrogen and freshwater production point of view [Volume 11, Issue 3, 2024, Pages 205-214]
Q
-
Quantitative study
Quantitative study of water level control system in PEM fuel cell separator for conservation of reactant gases [Volume 8, Issue 1, 2021, Pages 1-12]
R
-
Radial channel flow
The effect of inclined radial flow in proton exchange membrane fuel cells performance [Volume 1, Issue 3, 2014, Pages 141-152]
-
Radiation heat transfer
Three-dimensional modeling of transport phenomena in a planar anode-supported solid oxide fuel cell [Volume 4, Issue 1, 2017, Pages 37-52]
-
Reaction rate
Lattice Boltzmann Modeling of Methane Steam Reforming Reactions in Solid Oxide Fuel Cells [Volume 7, Issue 1, 2020, Pages 61-79]
-
Realization of Microstructure
A new approach to microstructure optimization of solid oxide fuel cell electrodes [Volume 4, Issue 2, 2017, Pages 93-102]
-
Reduction
Lithium-oxygen charge transfer interaction: a deformation density analysis study [Volume 11, Issue 2, 2024, Pages 117-122]
-
Reformer
Generating electricity using pico hydro-based power plant in Koohrang county, Iran: effect of energy storage type [Volume 11, Issue 1, 2024, Pages 19-38]
-
Relative smoothness
Preparation of Pd composite membrane via organic-inorganic activation method in electroless plating technique [Volume 2, Issue 3, 2015, Pages 151-158]
-
Research trend
Iranian hydrogen production insight: research trends and outlook [Volume 8, Issue 1, 2021, Pages 23-33]
-
Response surface methodology
Hydrothermal synthesis of nano-size zirconia using commercial zirconia powder: process optimization through response surface methodology [Volume 1, Issue 3, 2014, Pages 163-173]
-
Response surface methodology
Investigation of carbon dioxide capture from hydrogen using the thermal pressure swing adsorption process: Central composite design modeling [Volume 4, Issue 1, 2017, Pages 13-26]
-
Reynolds number
An Experimental Investigation on Simultaneous Effects of Oxygen Ratio and Flow-Rate in SOFCs Performance Fueled by a Mixture of Methane and Oxygen [Volume 6, Issue 1, 2019, Pages 11-22]
-
Ruddlesden-Popper, cathode
Synthesis and electrochemical properties of Sr3Fe1.8Co0.2O7 as a solid oxide fuel cell cathode [Volume 8, Issue 1, 2021, Pages 51-58]
S
-
Safe operation
Numerical Investigation of a Hydrogen-fuelled Planar AP-SOFC Performance with Special Focus on Safe Operation [Volume 8, Issue 2, 2021, Pages 113-125]
-
Saturation
Modeling and Optimization of non - isothermal two- phase flow in the cathode gas diffusion layer of PEM fuel cell [Volume 2, Issue 3, 2015, Pages 159-168]
-
SCC and mechanical Properties
The Effect of Pre- Stretching Treatment on the Microstructure, Mechanical Properties and Corrosion Resistance of 7075 Aluminum Alloy used in PEMFC [Volume 10, Issue 3, 2023, Pages 233-239]
-
Sealant
Mechanical and chemical characteristics of the PEM fuel cell sealants in simulated environment [Volume 9, Issue 2, 2022, Pages 163-178]
-
Sensitivity analysis
A Double Pipe Heat Exchanger Design and Optimization for Cooling an Alkaline Fuel Cell System [Volume 1, Issue 4, 2014, Pages 223-231]
-
Sensitivity analysis
Parametric study of a membrane energy exchanger based on energy, entropy, and exergy analysis for proton exchange membrane fuel cell application [Volume 11, Issue 3, 2024, Pages 153-168]
-
Shewanella oneidensis MR-1
A comparative study of three types of anode electrodes in a microfluidic microbial fuel cell [Volume 8, Issue 1, 2021, Pages 13-21]
-
Si
Study the stability of Si, Ge, Fe and Co in the interior surface of metallic carbon nanotube for hydrogen storage [Volume 2, Issue 3, 2015, Pages 197-205]
-
Sievert apparatus
Synthesis Zr-Co-Y based chemical getter and evaluation its vacuum preserving, sorption characteristics, and hydrogen absorption [Volume 6, Issue 2, 2019, Pages 171-184]
-
Silica membrane
Nanostructured Palladium-Doped Silica Membrane Layer Synthesis for Hydrogen Separation: Effect of Activated Sublayers [Volume 6, Issue 1, 2019, Pages 1-9]
-
Silica membrane
Silica membrane performance for hydrogen separation from methanol steam reforming products: Assessment of different multistage membrane schemes [Volume 6, Issue 1, 2019, Pages 59-70]
-
Simulation
Modeling of Multi-population Microbial Fuel and Electrolysis Cells Based on the Bioanode Potential Conditions [Volume 1, Issue 4, 2014, Pages 247-260]
-
Simulation
Simulation of integrated purification systems for hydrogen production in methanol steam reforming process [Volume 10, Issue 3, 2023, Pages 158-199]
-
Single-phase
The effect of inclined radial flow in proton exchange membrane fuel cells performance [Volume 1, Issue 3, 2014, Pages 141-152]
-
Single-phase
The simulation of novel annular shape on the Performance in Proton Exchange Membrane Fuel Cell [Volume 1, Issue 3, 2014, Pages 175-188]
-
Single-phase
Modeling and simulation of a new architecure stack applied on the PEM Fuel Cell [Volume 3, Issue 2, 2016, Pages 99-112]
-
Sintered porous wicks
Morphological and physical study of Cu-Ni sintered porous wicks used in heat pipes and fuel cells [Volume 3, Issue 4, 2016, Pages 255-266]
-
Smart Grids
Optimal Intelligent Control of Plug-in Fuel Cell Electric Vehicles in Smart Electric Grids [Volume 1, Issue 1, 2014, Pages 55-64]
-
Sodalite nanozeolite
Electrocatalytic oxidation of glucose on the modified carbon paste electrode with sodalite nanozeolite for fuel cell [Volume 2, Issue 1, 2015, Pages 47-58]
-
SOFC
Multi-objective optimization of two hybrid power generation systems for optimum selection of SOFC reactants heat exchangers mid-temperatures [Volume 4, Issue 3, 2017, Pages 175-188]
-
SOFC
Energy and economic comparison of SOFC-GT, MCFC-GT, and SOFC-MCFC-GT hybrid systems [Volume 4, Issue 4, 2017, Pages 275-287]
-
SOFC
Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]
-
SOFC
Nickel oxide-gadolinium doped ceria synthesized by new methods as anodes material for solid oxide fuel cells [Volume 9, Issue 2, 2022, Pages 133-147]
-
SOFC interconnect
Co3O4 spinel protection coating for solid oxide fuel cell interconnect application [Volume 1, Issue 2, 2014, Pages 121-131]
-
Soft chemistry method
Preparation, characterization and the study of electrochemical behavior of Y-doped Bariumcerate powders by new precursors [Volume 10, Issue 1, 2023, Pages 1-10]
-
Soft switching
A new SEPIC-Zeta bidirectional converter with high efficiency for renewable energy systems [Volume 11, Issue 3, 2024, Pages 142-152]
-
Soft switching
A New ZVT Interleaved High Step-up Converter with Ripple Cancelation for Photovoltaic Systems [(Articles in Press)]
-
Solar and geothermal energy
Applying geothermal and solar energies for the thermodynamic estimation of the multigeneration system’s performance in producing power, freshwater and hydrogen [Volume 11, Issue 3, 2024, Pages 179-188]
-
Solar collector
Thermodynamic investigation of applying a thermoelectric generator to produce hydrogen in a multigeneration system [Volume 10, Issue 2, 2023, Pages 131-145]
-
Solar collector
Multi-objective optimization of a combined heat and power (CHP) cycle with a solar collector: energy, exergy and economic point of view [Volume 11, Issue 2, 2024, Pages 95-106]
-
Solar collector
Thermodynamic investigation of a solar-based multigeneration system using AL2O3-Thermonol VP1 nanofluid [(Articles in Press)]
-
Solar energy
Assessment of a novel photovoltaic-electrolyzer-fuel cell-ORC hybrid energy system for hydrogen and power production [Volume 10, Issue 2, 2023, Pages 111-130]
-
Solar energy
Prospects and challenges for the production and use of green hydrogen as a promising energy in Libya [Volume 11, Issue 1, 2024, Pages 1-7]
-
Solar energy
Thermodynamic and thermoeconomic analysis of a multigeneration system using solar and geothermal energies [(Articles in Press)]
-
Solar energy
Exergy-Economic Analysis of Combined Heat and Power System Utilizing Solar Energy and Biomass [(Articles in Press)]
-
Solar energy
Future Prospects of Solar Energy Production and Storage in Iran [(Articles in Press)]
-
Solar fuel
Future Prospects of Solar Energy Production and Storage in Iran [(Articles in Press)]
-
Solar light
The effect of solvent of titanium precursor in the sol-gel process on the activity of TiO2 nanoparticles for H2 production [Volume 4, Issue 2, 2017, Pages 139-151]
-
Solar thermal
Future Prospects of Solar Energy Production and Storage in Iran [(Articles in Press)]
-
Solar thermal system
Enhancing Solar Energy Utilization in Buildings: Integrating Transparent Solar Panels and BIPV/T Systems for Optimal Energy Efficiency in Tabriz, Iran [(Articles in Press)]
-
Solid Alkaline Fuel Cell
Investigation of ion transport and water content properties in anion exchange membranes based on polysulfone for solid alkaline fuel cell application [Volume 2, Issue 1, 2015, Pages 13-25]
-
Solid oxide fuel cell
Electrophoretic deposition of MnCr2O4 coating for solid oxide fuel cell metallic interconnects [Volume 1, Issue 1, 2014, Pages 21-26]
-
Solid oxide fuel cell
Lattice Boltzmann modeling of two component gas diffusion in solid oxide fuel cell [Volume 2, Issue 4, 2015, Pages 263-270]
-
Solid oxide fuel cell
Energy Price Analysis of a Biomass Gasification-Solid Oxide Fuel Cell-Gas Turbine Power Plant [Volume 3, Issue 1, 2016, Pages 45-58]
-
Solid oxide fuel cell
Performance assessment of a SOFC cogeneration system for residential buildings located in eastern Iran [Volume 3, Issue 2, 2016, Pages 81-97]
-
Solid oxide fuel cell
Effect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system [Volume 3, Issue 4, 2016, Pages 301-313]
-
Solid oxide fuel cell
A new approach to microstructure optimization of solid oxide fuel cell electrodes [Volume 4, Issue 2, 2017, Pages 93-102]
-
Solid oxide fuel cell
Simulation of a Solid Oxide Fuel Cell with External Steam Methane Reforming and Bypass [Volume 4, Issue 2, 2017, Pages 103-118]
-
Solid oxide fuel cell
Lattice Boltzmann Modeling of Methane Steam Reforming Reactions in Solid Oxide Fuel Cells [Volume 7, Issue 1, 2020, Pages 61-79]
-
Solid oxide fuel cell
Synthesis and characterization of Ag-Y co-doped Mn-Co spinel for solid oxide fuel cell application [Volume 8, Issue 1, 2021, Pages 43-49]
-
Solid oxide fuel cell
Synthesis and electrochemical properties of Sr3Fe1.8Co0.2O7 as a solid oxide fuel cell cathode [Volume 8, Issue 1, 2021, Pages 51-58]
-
Solid oxide fuel cell
Comparative Numerical Study of Co- and Counter-Flow Configurations of an All-Porous Solid Oxide Fuel Cell [Volume 8, Issue 2, 2021, Pages 77-93]
-
Solid oxide fuel cell
Numerical Investigation of a Hydrogen-fuelled Planar AP-SOFC Performance with Special Focus on Safe Operation [Volume 8, Issue 2, 2021, Pages 113-125]
-
Solid oxide fuel cell
Preparation, characterization and the study of electrochemical behavior of Y-doped Bariumcerate powders by new precursors [Volume 10, Issue 1, 2023, Pages 1-10]
-
Solid oxide fuel cell
Performance Analysis and Working Fluids Selection of Organic Rankine Cycle in a Triple Power Generation System Combined with Gas Turbine and Solid Oxide Fuel Cell Cycles [Volume 10, Issue 1, 2023, Pages 11-32]
-
Solid oxide fuel cell
Performance assessment of a power/refrigeration cogeneration system driven by the waste heat of a solid oxide fuel cell [Volume 10, Issue 3, 2023, Pages 241-256]
-
Solid oxide fuel cell
Thermo-economic analysis of triple production system combination with Gas turbine, solid oxide fuel cell and absorption chiller [(Articles in Press)]
-
Solid Oxide Fuel Cells
La0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study [Volume 1, Issue 4, 2014, Pages 239-246]
-
Solid Oxide Fuel Cells
Three-dimensional modeling of transport phenomena in a planar anode-supported solid oxide fuel cell [Volume 4, Issue 1, 2017, Pages 37-52]
-
Solid Oxide Fuel Cells
Synthesis and investigation on microstructure and electrical conductivity of Ruddlesden-Popper phase, La1.9Sr0.1Ni0.7Cu0.3O4 (LSNC), as cathode material for intermediate temperature solid oxide fuel cells [Volume 8, Issue 2, 2021, Pages 69-76]
-
Solid Oxide Fuel Cells (SOFCs)
An Experimental Investigation on Simultaneous Effects of Oxygen Ratio and Flow-Rate in SOFCs Performance Fueled by a Mixture of Methane and Oxygen [Volume 6, Issue 1, 2019, Pages 11-22]
-
Specific Impulse
Performance verification of a laboratory scale hydrogen/oxygen combustion chamber [Volume 9, Issue 1, 2022, Pages 27-38]
-
SPEEK
Studies on the SPEEK membrane with low degree of sulfonation as a stable proton exchange membrane for fuel cell applications [Volume 3, Issue 3, 2016, Pages 221-232]
-
SPEEK
Dynamic investigation of hydrocarbon proton exchange membrane Fuel Cell [Volume 4, Issue 3, 2017, Pages 219-230]
-
Spinel
Electrophoretic deposition of MnCr2O4 coating for solid oxide fuel cell metallic interconnects [Volume 1, Issue 1, 2014, Pages 21-26]
-
Stack
Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]
-
Stack design
Design and Analysis of an Innovative Dead-end Cascade-type PEMFC Stack at Different Orientations [Volume 7, Issue 1, 2020, Pages 81-96]
-
State Variables
New Mathematical Modelling and Dynamic Simulation of a Molten Carbonate Fuel Cell [Volume 2, Issue 4, 2015, Pages 241-252]
-
Steam reforming
Reforming Integrated with Oxidation in Micro-Heat Exchanger Reactor with Circular Micro-Channels [Volume 1, Issue 2, 2014, Pages 65-74]
-
Steam reforming
Hydrogen production by steam reforming of dimethyle ether over Cu/ZnO/Al2O3 and H-ZSM-5 catalysts: An experimental and modeling study [Volume 1, Issue 3, 2014, Pages 153-161]
-
Steam reforming
Steam Reforming Integrated with Oxidation of Methanol in a Micro-Channel Reactor with Different Micro-Baffle Shapes [Volume 2, Issue 2, 2015, Pages 75-83]
-
Steam reforming
Hydrogen production via steam reforming of LPG on Ni/Zeolite catalysts [Volume 1, Issue 4, 2014, Pages 233-238]
-
Steam reforming
Optimization of the preparation procedure of Ni/Al2O3 catalyst for steam reforming of n-butane [Volume 2, Issue 3, 2015, Pages 139-149]
-
Steam Turbine
Exergy Analysis of a Molten Carbonate Fuel Cell-Turbo Expander-Steam Turbine Hybrid Cycle [Volume 3, Issue 4, 2016, Pages 267-279]
-
Steam Turbine
Multi-objective optimization of two hybrid power generation systems for optimum selection of SOFC reactants heat exchangers mid-temperatures [Volume 4, Issue 3, 2017, Pages 175-188]
-
Stoichiometry
Experimental Study of Oxidant Effect on Lifetime of PEM Fuel Cell [Volume 7, Issue 1, 2020, Pages 33-43]
-
Strain path
Numerical-experimental study on the thickness distribution of metallic bipolar plates for PEM fuel cells [Volume 9, Issue 1, 2022, Pages 1-18]
-
Stretching treatment
The Effect of Pre- Stretching Treatment on the Microstructure, Mechanical Properties and Corrosion Resistance of 7075 Aluminum Alloy used in PEMFC [Volume 10, Issue 3, 2023, Pages 233-239]
-
Strontium
Investigation of the catalytic performance and coke formation of nanocrystalline Ni/SrO-Al2O3 catalyst in dry reforming of methane [Volume 3, Issue 4, 2016, Pages 315-322]
-
Structural properties
Synthesis, characterization and hydrogen storage properties of Mm(Ni,Co,Mn,Al)5 alloy [Volume 1, Issue 2, 2014, Pages 83-94]
-
Supercapacitor
Highly Ordered Nanoporous β-Ni(OH)2 Nanobelt Array Architectures as Electrode Material for Electrochemical Capacitors: Design, Synthesis, Characterization and Supercapacitive Evaluation [Volume 10, Issue 2, 2023, Pages 157-171]
-
Supercapacitor
Facile hydrothermal synthesis and electrochemical investigation of a free-standing cobalt oxide hierarchical nanostructure electrode on a porous carbon structure as an efficient supercapacitor [Volume 11, Issue 2, 2024, Pages 123-130]
-
Sustainable Development
Future Prospects of Solar Energy Production and Storage in Iran [(Articles in Press)]
-
Switch
Experimental Investigation of a High Efficiency Power Path Controller for PEM Fuel Cell and Battery Hybrid System [Volume 9, Issue 2, 2022, Pages 149-161]
T
-
Thermal Conductivity
Morphological and physical study of Cu-Ni sintered porous wicks used in heat pipes and fuel cells [Volume 3, Issue 4, 2016, Pages 255-266]
-
Thermal coupling
Transient Three-dimensional Simulation of a Metal Hydride Hydrogen Storage Tank Interconnected to a PEM Fuel Cell by Heat Pipes [Volume 6, Issue 2, 2019, Pages 117-132]
-
Thermal Efficiency
Energy Management Simulation in a PEM Fuel Cell System [Volume 2, Issue 1, 2015, Pages 1-6]
-
Thermodynamic analysis
Applying geothermal and solar energies for the thermodynamic estimation of the multigeneration system’s performance in producing power, freshwater and hydrogen [Volume 11, Issue 3, 2024, Pages 179-188]
-
Thermodynamic analysis
Thermodynamic investigation of a solar-based multigeneration system using AL2O3-Thermonol VP1 nanofluid [(Articles in Press)]
-
Thermoelectric generator
Thermodynamic investigation of applying a thermoelectric generator to produce hydrogen in a multigeneration system [Volume 10, Issue 2, 2023, Pages 131-145]
-
The temperature distribution
Parametric study of the influence of cooling channel dimensions on PEM fuel cell thermal performance [Volume 4, Issue 4, 2017, Pages 265-274]
-
Thickness distribution
Numerical-experimental study on the thickness distribution of metallic bipolar plates for PEM fuel cells [Volume 9, Issue 1, 2022, Pages 1-18]
-
Three-Point bending
Numerical-experimental study on the Failure Behavior of Graphite-Based Composite Bipolar Plate for PEM fuel cells [Volume 9, Issue 2, 2022, Pages 107-116]
-
TiO2 nanoparticles
The effect of solvent of titanium precursor in the sol-gel process on the activity of TiO2 nanoparticles for H2 production [Volume 4, Issue 2, 2017, Pages 139-151]
-
TiO2 nanotube arrays (TNAs)
A high performance lithium-ion battery using LiNa0.02K0.01FePO4/C as cathode material and anatase TiO2 nanotube arrays as anode material [Volume 4, Issue 1, 2017, Pages 27-35]
-
Titanium Nitride (TiN) Coating
Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]
-
Transient Model
Integration of a Vanadium Redox Flow Battery with a Proton Exchange Membrane Fuel Cell as an Energy Storage System [Volume 4, Issue 1, 2017, Pages 53-68]
-
Transparent photovoltaic
Enhancing Solar Energy Utilization in Buildings: Integrating Transparent Solar Panels and BIPV/T Systems for Optimal Energy Efficiency in Tabriz, Iran [(Articles in Press)]
-
Turbo Expander
Exergy Analysis of a Molten Carbonate Fuel Cell-Turbo Expander-Steam Turbine Hybrid Cycle [Volume 3, Issue 4, 2016, Pages 267-279]
U
-
Uniform pressure
Investigation and optimization of a PEM fuel cell’s electrical and mechanical behavior [Volume 3, Issue 1, 2016, Pages 1-10]
-
Uniform temperature distribution
Parametric study of the influence of cooling channel dimensions on PEM fuel cell thermal performance [Volume 4, Issue 4, 2017, Pages 265-274]
-
Unmanned Underwater Vehicles
Fuel Cell Power System Conceptual Design for Unmanned Underwater Vehicle [Volume 10, Issue 1, 2023, Pages 33-50]
-
Utilization factor
Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization [Volume 3, Issue 3, 2016, Pages 183-197]
V
-
Vacuum
Synthesis Zr-Co-Y based chemical getter and evaluation its vacuum preserving, sorption characteristics, and hydrogen absorption [Volume 6, Issue 2, 2019, Pages 171-184]
-
Vanadium Redox Battery
Integration of a Vanadium Redox Flow Battery with a Proton Exchange Membrane Fuel Cell as an Energy Storage System [Volume 4, Issue 1, 2017, Pages 53-68]
-
VCR
Performance assessment of a power/refrigeration cogeneration system driven by the waste heat of a solid oxide fuel cell [Volume 10, Issue 3, 2023, Pages 241-256]
-
Venturi
Quantitative study of water level control system in PEM fuel cell separator for conservation of reactant gases [Volume 8, Issue 1, 2021, Pages 1-12]
-
Vibrational properties
Experimental study and numerical modeling of vibrational characteristics of a 500W PEM fuel cell stack [Volume 9, Issue 1, 2022, Pages 39-52]
-
Virtual impedance method
A brief review on the application of the virtual impedance method in islanded alternating current microgrids to control reactive power sharing [Volume 11, Issue 3, 2024, Pages 189-204]
-
Voltage Decay
Experimental Study of Oxidant Effect on Lifetime of PEM Fuel Cell [Volume 7, Issue 1, 2020, Pages 33-43]
-
Voltage Variation
Extremely Fast Simulation of the Li--Ion Batteries Governing Equations [Volume 10, Issue 4, 2023, Pages 339-353]
W
-
Wastewater treatment
Effect of batch vs. continuous mode of operation on microbial desalination cell performance treating municipal wastewater [Volume 3, Issue 4, 2016, Pages 281-290]
-
Wastewater treatment
Implementation of Chitosan modified ultrafiltration hollow fiber as proton exchange membrane of ml-scale microbial fuel cells [Volume 10, Issue 4, 2023, Pages 299-310]
-
Water diagnosis
Development and Simulation of a PEM Fuel Cell model for Prediction of Water Content and Power Generation [Volume 4, Issue 4, 2017, Pages 289-299]
-
Water level control system
Quantitative study of water level control system in PEM fuel cell separator for conservation of reactant gases [Volume 8, Issue 1, 2021, Pages 1-12]
-
Wet chemical route
Highly Ordered Nanoporous β-Ni(OH)2 Nanobelt Array Architectures as Electrode Material for Electrochemical Capacitors: Design, Synthesis, Characterization and Supercapacitive Evaluation [Volume 10, Issue 2, 2023, Pages 157-171]
-
WRR
Parametric study of a membrane energy exchanger based on energy, entropy, and exergy analysis for proton exchange membrane fuel cell application [Volume 11, Issue 3, 2024, Pages 153-168]
Y
-
Yttrium doped barium cerate
Preparation, characterization and the study of electrochemical behavior of Y-doped Bariumcerate powders by new precursors [Volume 10, Issue 1, 2023, Pages 1-10]
Z
-
Zeolite 5A
Investigation of carbon dioxide capture from hydrogen using the thermal pressure swing adsorption process: Central composite design modeling [Volume 4, Issue 1, 2017, Pages 13-26]
-
Zeolite Membrane
Effect of Dehydration Temperature on the H2 Separation Potential of Hydroxy Sodalite Zeolite Membranes [Volume 1, Issue 4, 2014, Pages 209-214]
-
Zinc-air fuel cell
Chemical kinetics analysis of a zinc-air fuel cell [Volume 11, Issue 1, 2024, Pages 39-45]
-
Zirconium-Cobalt Powder
Synthesis Zr-Co-Y based chemical getter and evaluation its vacuum preserving, sorption characteristics, and hydrogen absorption [Volume 6, Issue 2, 2019, Pages 171-184]
-
ZrO2 nanorod
Buckypaper-based catalytic electrode containing graphene nanoplates and ZrO2 nanorod composite to improve PEMFC performance [Volume 5, Issue 1, 2018, Pages 57-69]
-
ZVT
A new SEPIC-Zeta bidirectional converter with high efficiency for renewable energy systems [Volume 11, Issue 3, 2024, Pages 142-152]
Your query does not match with any item