Palladium nanoparticles supported on carbon black powder as an effective anodic catalyst for application in a direct glucose alkaline fuel cell

Document Type : Research Paper


1 Hydrogen and Fuel Cell Research Laboratory, Department of chemistry, Yasouj University, Yasouj, Iran, Ph.D. Student

2 Department of Chemistry, School of basic sciences, Yasouj University, Yasouj, Iran


Palladium nanoparticles supported on carbon black powder (Vulcan XC-72) nanocomposite (Pd/C) are synthesized as the catalyst for the anodic oxidation of glucose for use in a direct glucose alkaline fuel cell (DGAFC). Characterization of the catalyst is carried out using physical and electrochemical methods. It is observed that Palladium nanoparticles are uniformly dispersed onto the carbon black powder nanocomposite support. The catalytic properties of the catalyst for glucose electro-oxidation were studied using electrochemical methods such as cyclic voltammetry and chronoamperometry. Cyclic voltammetry shows that this catalysts exhibit high electro catalytic activity for glucose oxidation. Pd/Vulcan XC-72 /glassy carbon electrode exhibits a well-defined catalytic oxidation peak current increasing linearly with an increase in the glucose concentration in rang of 10 mM to 60 mM. Chronoamperometry indicate that Pd/Vulcan XC-72 exhibits a steady state activity for glucose oxidation. Results show that the prepared Pd/Vulcan XC-72 as an effective anodic catalyst toward glucose electro-oxidation. Therefore this electrode is a good candidate for application in direct glucose alkaline fuel cells.


Main Subjects

 [1] Yingying Gu , Yicheng Liu , Haihong Yang , Benqiang Li , Yarui An., “  Electrocatalytic glucose oxidation via hybrid nanomaterial catalyst of multi-wall TiO2 nanotubes supported Ni(OH)2 nanoparticles: Optimization of the loading level”, Electrochimica Acta 2015; 160: 263. 
[2] Chen C, Lin C, Chen L., “Functionalized Carbon Nanomaterial Supported Palladium Nano-
Catalysts for Electrocatalytic Glucose Oxidation Reaction”, Electrochimica Acta 2015; 152: 408. 
 [3] Lei L, Keith S, Eileen H., “A direct glucose alkaline fuel cell using MnO2 - carbon nanocomposite supported gold catalyst for anode glucose oxidation”, Journal of Power Sources 2013; 221:1.
[4] Abdulah Mirzaie R. and Eshghi A., “Study of methanol electro-oxidation on Ni and Ni–Pt/carbon paper electrodes for direct methanol fuel cell applications”, Surf. Eng., 2014, 30: 263.
 [5]  Hebié S, Cornu L,  Napporn T,  Rousseau J,  Kokoh B., “  Insight on the surface structure effect of free gold nanorods on glucose electrooxidation”, J. Phys. Chem.C 2013; 117:  9872.
[6] Basu D, Basu S., “Performance studies of Pd-Pt and Pt-Pd-Au catalyst for electro-oxidation of glucose in direct glucose fuel cell”, Int J Hydrogen Energy 2012; 37: 4678.
[7] Ye W, Zhang X, Chen Y, Du Y, Zhou F. and Wang C., “   Pulsed Electrodeposition of Reduced Graphene Oxide on Glass Carbon Electrode as an Effective Support of Electrodeposited Pt Microspherical Particles: Nucleation Studies and the Application for Methanol Electro-Oxidation”, J. Electrochem. Sci. 2013; 8: 2122.
 [8]  Habrioux A, Sibert E, Servat K, Vogel W, Kokoh KB, Alonso- Vante N., “    Activity of platinumegold alloys for glucose electrooxidation in biofuel cells”, J Phys Chem B 2007; 111:
[9] Gao Z.D., “     Nickel Hydroxide Nanoparticle Activated Semi-metallic TiO2 Nanotube Arrays for Non-enzymatic Glucose Sensing”, Chemistry-a European Journal 2013; 19:15530.
[10] Gao H., “One-Step Electrochemical Synthesis of PtNi Nanoparticle-Graphene Nanocomposites for Nonenzymatic Amperometric Glucose Detection”, ACS Applied Materials & Interfaces; 3: 3049.
[11] Zhiani M, Rezaei B, Jalili J., “Methanol electro-oxidation on Pt/C modified by polyaniline nanofibers for DMFC applications”, Int J Hydrogen Energy 2010; 35:9298.
[12] Zhu H., Luo M., Zhang S., Wei L., Wang F., Wang Z., Wei Y. and Han K., “Combined method to prepare core-shell structured catalyst for proton exchange membrane fuel cells’, Int. J. Hydrogen Energy., 2013, 38: 3323.
 [13] Cheng C.H., Malek K, Sui P.C. and Djilali N., “Effect of Pt nano-particle size on the microstructure of PEM fuel cell catalyst layers: Insights from molecular dynamics simulations”, Electrochim. Acta., 2010, 55: 1588.
[14] Termpornvithit C., N. Chewasatn N. and Hunsom M., “Stability of Pt-Co/C and Pt-Pd/C based oxygen reduction reaction electrocatalysts prepared at a low temperature by a combined impregnation and seeding process in PEM fuel cells”, J Appl Electrochem., 2012,42: 69.
[15] Ye W., Zhang X., Chen Y., Du Y., Zhou F. and Wang C., “Pulsed Electrodeposition of Reduced Graphene Oxide on Glass Carbon Electrode as an Effective Support of Electrodeposited Pt Microspherical Particles: Nucleation Studies and the Application for Methanol Electro-Oxidation”, J. Electrochem. Sci., 2013, 8: 2122.
 [16] Hilder M., Winther-Jensen B., Li D., Forsyth M. and MacFarlane D.R., “Direct electro-deposition of graphene from aqueous suspensions”, Phys. Chem. Chem. Phys., 2011, 13: 9187.
[17] Liu C., Wang K., Luo S., Tang Y. and Chen L., “Direct Electrodeposition of Graphene Enabling the One-Step Synthesis of Graphene–Metal Nanocomposite Films”,Small., 2011, 7: 1203.
 [18] Peng Z, Yang H., “PtAu bimetallic heteronanostructures made by post-synthesis modifi cation of Pt-on-Au nanoparticles”, Nano Res 2009; 2:406.
[19] Li B. and Chan S.H., “PtFeNi tri-metallic alloy nanoparticles as electrocatalyst for oxygen reduction reaction in proton exchange membrane fuel cells with ultra-low Pt loading”, Int J Hydrogen Energy., 2013; 38: 3338.
[20] Kheirmand M. and Eshghi A., “Electro deposition of platinum nanoparticles on reduced graphene oxide as an efficient catalyst for oxygen reduction reaction”, Iranian Journal of Hydrogen & Fuel Cell 2015; 1:7.
[21] Danaee I, Jafarian M, Forouzandeh F, Gobal F, Mahjani M., “ Electro catalytic oxidation of methanol on Ni and NiCu alloy modified glassy carbon electrode”,Int J Hydrogen Energy 2008; 33: 4367.
[22] Hosseini M and Momeni M., “   Gold particles supported on self-organized nanotubular TiO2
matrix as highly active catalysts for electrochemical oxidation of glucose”, J Solid State Electrochem 2010; 14:1109.
[23] Shamsipur M., Najafi M, Milani Hosseini M., “Highly improved electrooxidation of glucose at a nickel (II) oxide/multi-walled carbon nanotube modified glassy carbon electrode”, Bioelectrochemistry 2010; 77: 120.
[24]   Hassaninejad-Darzi S and Yousefi F., “Electrocatalytic oxidation of glucose on the modified carbon paste electrode with sodalite nanozeolite for fuel cell”, Iranian Journal of Hydrogen & Fuel Cell 2015; 1:47.
[25] Yan X., Ge X and Cui S., Pt-decorated nanoporous gold for glucose electrooxidation in neutral and alkaline solutions”, Nanoscale Research Letters., 2011, 6:313.
[26] Basu D, Basu S., “Synthesis and characterization of Pt-Au/C catalyst for glucose electro-oxidation for the application in direct glucose fuel cell”, Int J Hydrogen Energy 2011; 36: 14923.