Design and Investigation of Honeycomb End Plates for PEM Fuel Cells

Document Type : Research Paper


1 Department of Mechanical Engineering, Jouybar Branch, Islamic Azad University, Jouybar, Iran

2 Department of Mechanical Engineering, Tarbiat Modares University, Tehran, Iran

3 Department of Mechanical Engineering, Sari Branch, Islamic Azad University, Sari, Iran


In this article a new structure of PEM fuel cell end plate is presented. The new structure is known as a honeycomb sandwich panel. Several properties of the presented structure, such as mechanical and thermal behavior, as well as its advantages and disadvantages are introduced. The aim of this paper is to reduce the weight of the while maintaining a better compression force on the PEM fuel cell components. By considering a honeycomb sandwich panel, this structure has lighter weight and more strength and flexibility. In this regard, some mechanical experiments and electrical simulations have been done on the honeycomb structure end plates to provide a comparisom between this new structure and the old structure usually made of steel. These mechanical experiments include pressure and bending tests. The results were evaluated in two cases: with foam and no foam. After analyzing the experimental results, it has been concluded that the honeycomb sandwich panel structure for end plates has many advantages that makes it a good alternative to the old endplate structure.


Main Subjects

[1] Habibnia M. et al., "Investigation and optimization of a PEM fuel cell’s electrical and mechanical behavior." Iranian Journal of Hydrogen & Fuel Cell, 2016, 3.1, 1: 10.
[2] Fili Mohammad Hossein. et al., "Modeling and experimental study on the sealing gasket of proton exchange membrane fuel cells." Iranian Journal of Hydrogen & Fuel Cell, 2017, 3.3, 213: 220.
[3] Habibnia M. et al., "Determination of the effective parameters on the fuel cell effciency, based on sealing behavior of the system." Int. J. Hydrogen Energy, 2016, 41.40, 18147: 18156.
[4] Technical Fabrics Handbook-Reinforcements for composites. Hexcel corporation: USA, 2010.
[5] ASTM E290-14, Standard Test Methods for Bend Testing of Material for Ductility, ASTM International, West Conshohocken, PA, 2014.
[6] HexWeb Honeycomb Attributes and Properties, Hexcell, Editor. 2013, Hexcell company: USA.
[7] Habibnia Mostafa. et al., "Design and Investigation of Honeycombs", Master Thesis, Islamic Azad University, Sari Branch, 2017.
[8] Redux Bonding Technology, Hexcell, Editor, Hexcell Company, 2014.
[9] Xiong J. et al.,  "Shear and bending performance of carbon fiber composite sandwich panels with pyramidal truss cores." Acta Materialia, 2012, 60.4, 1455: 1466.
[10] ASTM E290-14, Standard Test Methods for Bend Testing of Material for Ductility, ASTM International, West Conshohocken, PA, 2014.
[11] Ha Na Yu. et al., "Axiomatic design of the sandwich composite end plate for PEMFC in fuel cell vehicles." Composite Structures, 2010, 92.6, 1504: 1511.
[12] Siegel Ch. et al., "Approaches for the Modeling of PBI/ H3PO4 Based HT-PEM Fuel Cells." High Temperature Polymer Electrolyte Membrane Fuel Cells, Springer International Publishing, 2016, 18: 387.