Agaebrahimi, Mohammad Reza Performance assessment of a SOFC cogeneration system for residential buildings located in eastern Iran [Volume 3, Issue 2, 2016, Pages 81-97]
Aliakbar Golkar, Masoud Hierarchical Control Strategy of Heat and Power for Zero Energy Buildings including Hybrid Fuel Cell/Photovoltaic Power Sources and Plug-in Electric Vehicle [Volume 3, Issue 1, 2016, Pages 33-44]
Alinoori, Amir Hosein Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]
Alizadeh, Ebrahim Electrochemical Impedance Spectroscopy for Investigation of Different Losses in 4-cells Short Stack with Integrated Humidifier and Water Separator [Volume 3, Issue 2, 2016, Pages 127-136]
Alizadeh, Ebrahim Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization [Volume 3, Issue 3, 2016, Pages 183-197]
Ameri, Mehran Effect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system [Volume 3, Issue 4, 2016, Pages 301-313]
Amir, Elaheh Investigation of the catalytic performance and coke formation of nanocrystalline Ni/SrO-Al2O3 catalyst in dry reforming of methane [Volume 3, Issue 4, 2016, Pages 315-322]
Asadi, Samane In situ activation of a Ni catalyst with Mo ion for hydrogen evolution reaction in alkaline solution [Volume 3, Issue 2, 2016, Pages 151-158]
Asghari, Saeed Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]
B
Babibi, Biuck Ethanol electrooxidation on the Co@Pt core-shell nanoparticles modified carbon-ceramic electrode in acidic and alkaline media [Volume 3, Issue 1, 2016, Pages 19-31]
Baheri Islami, Sima The effect of vertical injection of reactants to the membrane electrode assembly on the performance of a PEM fuel cell [Volume 3, Issue 3, 2016, Pages 167-182]
Bahri Rasht Abadi, Mohammad Mahdi How to Design a Cryogenic Joule-Thomson Cooling System: Case Study of Small Hydrogen Liquefier [Volume 3, Issue 2, 2016, Pages 113-125]
Bahri Rasht Abadi, Mohammad Mahdi Influence of unsuitable operational conditions on the transient performance of a small hydrogen liquefier [Volume 3, Issue 3, 2016, Pages 199-212]
E
Ebrahimi, Atiyeh Effect of batch vs. continuous mode of operation on microbial desalination cell performance treating municipal wastewater [Volume 3, Issue 4, 2016, Pages 281-290]
Eshghi, Abolfath Palladium nanoparticles supported on carbon black powder as an effective anodic catalyst for application in a direct glucose alkaline fuel cell [Volume 3, Issue 1, 2016, Pages 11-17]
F
Farzad, Mohammad Ali Performance assessment of a SOFC cogeneration system for residential buildings located in eastern Iran [Volume 3, Issue 2, 2016, Pages 81-97]
Fathi, Hossein The Impact of Wettability on Effective Properties of Cathode Catalyst Layer in a Proton Exchange Membrane Fuel Cell [Volume 3, Issue 3, 2016, Pages 233-245]
Fili, Mohammad Hossein Modeling and experimental study on the sealing gasket of proton exchange membrane fuel cells [Volume 3, Issue 3, 2016, Pages 213-220]
G
Gashoul, Fatemeh Studies on the SPEEK membrane with low degree of sulfonation as a stable proton exchange membrane for fuel cell applications [Volume 3, Issue 3, 2016, Pages 221-232]
Ghadamian, Hossein Energy Price Analysis of a Biomass Gasification-Solid Oxide Fuel Cell-Gas Turbine Power Plant [Volume 3, Issue 1, 2016, Pages 45-58]
Ghaderi, Serveh Ethanol electrooxidation on the Co@Pt core-shell nanoparticles modified carbon-ceramic electrode in acidic and alkaline media [Volume 3, Issue 1, 2016, Pages 19-31]
Ghafouri Roozbahani, Mohammad Ali Methanol steam reforming; Effects of various metal oxides on the properties of a Cu-based catalyst [Volume 3, Issue 4, 2016, Pages 291-299]
Ghasemi Tamami, Peyman Investigation and optimization of a PEM fuel cell’s electrical and mechanical behavior [Volume 3, Issue 1, 2016, Pages 1-10]
Ghasemi Tamami, Peyman Modeling and experimental study on the sealing gasket of proton exchange membrane fuel cells [Volume 3, Issue 3, 2016, Pages 213-220]
Ghiasi, Mohammad Iman Hierarchical Control Strategy of Heat and Power for Zero Energy Buildings including Hybrid Fuel Cell/Photovoltaic Power Sources and Plug-in Electric Vehicle [Volume 3, Issue 1, 2016, Pages 33-44]
H
Habibnia, Mostafa Investigation and optimization of a PEM fuel cell’s electrical and mechanical behavior [Volume 3, Issue 1, 2016, Pages 1-10]
Habibnia, Mostafa Modeling and experimental study on the sealing gasket of proton exchange membrane fuel cells [Volume 3, Issue 3, 2016, Pages 213-220]
Hajizadeh, Amin Hierarchical Control Strategy of Heat and Power for Zero Energy Buildings including Hybrid Fuel Cell/Photovoltaic Power Sources and Plug-in Electric Vehicle [Volume 3, Issue 1, 2016, Pages 33-44]
Hassanzadeh, Hassan Performance assessment of a SOFC cogeneration system for residential buildings located in eastern Iran [Volume 3, Issue 2, 2016, Pages 81-97]
Hedayati, Ali Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]
Hossainpour, Siamak The effect of vertical injection of reactants to the membrane electrode assembly on the performance of a PEM fuel cell [Volume 3, Issue 3, 2016, Pages 167-182]
I
Iranmanesh, Masoud Effect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system [Volume 3, Issue 4, 2016, Pages 301-313]
K
Kaflou, Ali Morphological and physical study of Cu-Ni sintered porous wicks used in heat pipes and fuel cells [Volume 3, Issue 4, 2016, Pages 255-266]
Kebria, Daryoush Effect of batch vs. continuous mode of operation on microbial desalination cell performance treating municipal wastewater [Volume 3, Issue 4, 2016, Pages 281-290]
Khandan, Nahid Methanol steam reforming; Effects of various metal oxides on the properties of a Cu-based catalyst [Volume 3, Issue 4, 2016, Pages 291-299]
Kheirmand, Mehdi Palladium nanoparticles supported on carbon black powder as an effective anodic catalyst for application in a direct glucose alkaline fuel cell [Volume 3, Issue 1, 2016, Pages 11-17]
Khorshidian, Majid Electrochemical Impedance Spectroscopy for Investigation of Different Losses in 4-cells Short Stack with Integrated Humidifier and Water Separator [Volume 3, Issue 2, 2016, Pages 127-136]
Khorshidian, Majid Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization [Volume 3, Issue 3, 2016, Pages 183-197]
Koosha, Morteza Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]
M
Madram, Ali Reza In situ activation of a Ni catalyst with Mo ion for hydrogen evolution reaction in alkaline solution [Volume 3, Issue 2, 2016, Pages 151-158]
Mansouri, Seyed Hossein The Impact of Wettability on Effective Properties of Cathode Catalyst Layer in a Proton Exchange Membrane Fuel Cell [Volume 3, Issue 3, 2016, Pages 233-245]
Masrori Saadat, Seyed Hossein Electrochemical Impedance Spectroscopy for Investigation of Different Losses in 4-cells Short Stack with Integrated Humidifier and Water Separator [Volume 3, Issue 2, 2016, Pages 127-136]
Masrori Saadat, Seyed Hossein Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization [Volume 3, Issue 3, 2016, Pages 183-197]
Meshkani, Fereshteh A comparative study on the kinetics of carbon dioxide methanation over bimetallic and monometallic catalysts [Volume 3, Issue 1, 2016, Pages 59-71]
Meshkani, Fereshteh Investigation of the catalytic performance and coke formation of nanocrystalline Ni/SrO-Al2O3 catalyst in dry reforming of methane [Volume 3, Issue 4, 2016, Pages 315-322]
Moayeri, Mona Morphological and physical study of Cu-Ni sintered porous wicks used in heat pipes and fuel cells [Volume 3, Issue 4, 2016, Pages 255-266]
N
Najafpour, Ghasem Effect of batch vs. continuous mode of operation on microbial desalination cell performance treating municipal wastewater [Volume 3, Issue 4, 2016, Pages 281-290]
Nourouzi, Salman Investigation and optimization of a PEM fuel cell’s electrical and mechanical behavior [Volume 3, Issue 1, 2016, Pages 1-10]
O
Ozgoli, Hassan Ali Energy Price Analysis of a Biomass Gasification-Solid Oxide Fuel Cell-Gas Turbine Power Plant [Volume 3, Issue 1, 2016, Pages 45-58]
Ozgoli, Hassan Ali Exergy Analysis of a Molten Carbonate Fuel Cell-Turbo Expander-Steam Turbine Hybrid Cycle [Volume 3, Issue 4, 2016, Pages 267-279]
P
Parnian, Mohammad Javad Studies on the SPEEK membrane with low degree of sulfonation as a stable proton exchange membrane for fuel cell applications [Volume 3, Issue 3, 2016, Pages 221-232]
Pourmahmoud, Nader Modeling and simulation of a new architecure stack applied on the PEM Fuel Cell [Volume 3, Issue 2, 2016, Pages 99-112]
R
Rahgoshay, Seyed Majid Electrochemical Impedance Spectroscopy for Investigation of Different Losses in 4-cells Short Stack with Integrated Humidifier and Water Separator [Volume 3, Issue 2, 2016, Pages 127-136]
Rahgoshay, Seyed Majid Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization [Volume 3, Issue 3, 2016, Pages 183-197]
Rahimi-Esbo, Mazaher Electrochemical Impedance Spectroscopy for Investigation of Different Losses in 4-cells Short Stack with Integrated Humidifier and Water Separator [Volume 3, Issue 2, 2016, Pages 127-136]
Rahimi-Esbo, Mazaher Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization [Volume 3, Issue 3, 2016, Pages 183-197]
Rahmani, Soudabeh A comparative study on the kinetics of carbon dioxide methanation over bimetallic and monometallic catalysts [Volume 3, Issue 1, 2016, Pages 59-71]
Rajabinasab, Morteza Effect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system [Volume 3, Issue 4, 2016, Pages 301-313]
Ramin, Farzin The effect of vertical injection of reactants to the membrane electrode assembly on the performance of a PEM fuel cell [Volume 3, Issue 3, 2016, Pages 167-182]
Raoof, Amir The Impact of Wettability on Effective Properties of Cathode Catalyst Layer in a Proton Exchange Membrane Fuel Cell [Volume 3, Issue 3, 2016, Pages 233-245]
Rezaei, Mehran A comparative study on the kinetics of carbon dioxide methanation over bimetallic and monometallic catalysts [Volume 3, Issue 1, 2016, Pages 59-71]
Rezaei, Mehran Investigation of the catalytic performance and coke formation of nanocrystalline Ni/SrO-Al2O3 catalyst in dry reforming of methane [Volume 3, Issue 4, 2016, Pages 315-322]
Rowshanzamir, Soosan Studies on the SPEEK membrane with low degree of sulfonation as a stable proton exchange membrane for fuel cell applications [Volume 3, Issue 3, 2016, Pages 221-232]
S
Saberimoghaddam, Ali How to Design a Cryogenic Joule-Thomson Cooling System: Case Study of Small Hydrogen Liquefier [Volume 3, Issue 2, 2016, Pages 113-125]
Saberimoghaddam, Ali Influence of unsuitable operational conditions on the transient performance of a small hydrogen liquefier [Volume 3, Issue 3, 2016, Pages 199-212]
Sadeghi, Davood Morphological and physical study of Cu-Ni sintered porous wicks used in heat pipes and fuel cells [Volume 3, Issue 4, 2016, Pages 255-266]
Sadeghi, Saber Effect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system [Volume 3, Issue 4, 2016, Pages 301-313]
Safavenejad, Ali Performance assessment of a SOFC cogeneration system for residential buildings located in eastern Iran [Volume 3, Issue 2, 2016, Pages 81-97]
Shakeri, Mohsen Investigation and optimization of a PEM fuel cell’s electrical and mechanical behavior [Volume 3, Issue 1, 2016, Pages 1-10]
T
Torkavannejad, Ashkan Modeling and simulation of a new architecure stack applied on the PEM Fuel Cell [Volume 3, Issue 2, 2016, Pages 99-112]
V
Vuorinen, Esa Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]
