Abdullah, Shahrir Theoretical study of the effect of hydrogen addition to natural gas-fueled direct-injection engines [Volume 1, Issue 1, 2014, Pages 11-20]
Abdullah Mirzaie, Rasol Single walled carbon nanotube in the reaction layer of gas diffusion electrode for oxygen reduction reaction [Volume 1, Issue 2, 2014, Pages 75-82]
Alavi Sadr, Seyyed Mojtaba Synthesis, characterization and hydrogen storage properties of Mm(Ni,Co,Mn,Al)5 alloy [Volume 1, Issue 2, 2014, Pages 83-94]
Amirshaghaghi, Paria Hydrogen production by steam reforming of dimethyle ether over Cu/ZnO/Al2O3 and H-ZSM-5 catalysts: An experimental and modeling study [Volume 1, Issue 3, 2014, Pages 153-161]
Arabi, Hadi "Physical properties and electronic structure of LaNi5 compound before and after hydrogenation: An experimental and theoretical approach" [Volume 1, Issue 1, 2014, Pages 27-39]
Arabi, Hadi Synthesis, characterization and hydrogen storage properties of Mm(Ni,Co,Mn,Al)5 alloy [Volume 1, Issue 2, 2014, Pages 83-94]
Ariyanfar, Leyli A Double Pipe Heat Exchanger Design and Optimization for Cooling an Alkaline Fuel Cell System [Volume 1, Issue 4, 2014, Pages 223-231]
Ataie, Abolghasem La0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study [Volume 1, Issue 4, 2014, Pages 239-246]
B
Babaei, Alireza La0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study [Volume 1, Issue 4, 2014, Pages 239-246]
Babaluo, Ali Akbar Effect of Dehydration Temperature on the H2 Separation Potential of Hydroxy Sodalite Zeolite Membranes [Volume 1, Issue 4, 2014, Pages 209-214]
Baghban Yousefkhani, Mojtaba A Double Pipe Heat Exchanger Design and Optimization for Cooling an Alkaline Fuel Cell System [Volume 1, Issue 4, 2014, Pages 223-231]
Baheri, Sima The effect of inclined radial flow in proton exchange membrane fuel cells performance [Volume 1, Issue 3, 2014, Pages 141-152]
Behbahani, Amin Hydrothermal synthesis of nano-size zirconia using commercial zirconia powder: process optimization through response surface methodology [Volume 1, Issue 3, 2014, Pages 163-173]
Ebrahimpour, Reza Modeling of measurement error in refractive index determination of fuel cell using neural network and genetic algorithm [Volume 1, Issue 2, 2014, Pages 95-104]
Eliassi, Ali Hydrogen production by steam reforming of dimethyle ether over Cu/ZnO/Al2O3 and H-ZSM-5 catalysts: An experimental and modeling study [Volume 1, Issue 3, 2014, Pages 153-161]
Esfandeh, Somayeh Modeling of measurement error in refractive index determination of fuel cell using neural network and genetic algorithm [Volume 1, Issue 2, 2014, Pages 95-104]
Esmaeilifar, Ashkan Hydrothermal synthesis of nano-size zirconia using commercial zirconia powder: process optimization through response surface methodology [Volume 1, Issue 3, 2014, Pages 163-173]
F
Fathollahi Zonouz, Abolfazl Effect of temperature on kinetics of the hydrogen evolution reaction on Ni-P-C cathodes in alkaline solution [Volume 1, Issue 4, 2014, Pages 215-222]
G
Ghadamian, Hossein A Double Pipe Heat Exchanger Design and Optimization for Cooling an Alkaline Fuel Cell System [Volume 1, Issue 4, 2014, Pages 223-231]
Ghafouri Roozbahani, Mohammad Ali Hydrogen production via steam reforming of LPG on Ni/Zeolite catalysts [Volume 1, Issue 4, 2014, Pages 233-238]
Ghanbarian, Asrin Performance Improvement of PEM Fuel Cells Using Air Channel Indentation; Part I: Mechanisms to Enrich Oxygen Concentration in Catalyst Layer [Volume 1, Issue 4, 2014, Pages 199-207]
Ghanbarlou, Hosna Preparation of Nitrogen-Doped Graphene By Solvothermal Process as Supporting Material for Fuel Cell Catalysts [Volume 1, Issue 2, 2014, Pages 113-119]
Gharibi, Hussein Determination of thermodynamic parameters of hydrogen permeation of palladium membrane for considering the effect of stainless steel support [Volume 1, Issue 1, 2014, Pages 1-10]
Golkar, Masoud Optimal Intelligent Control of Plug-in Fuel Cell Electric Vehicles in Smart Electric Grids [Volume 1, Issue 1, 2014, Pages 55-64]
H
Hajizadeh, Amin Optimal Intelligent Control of Plug-in Fuel Cell Electric Vehicles in Smart Electric Grids [Volume 1, Issue 1, 2014, Pages 55-64]
Hormozi, Faramarz Reforming Integrated with Oxidation in Micro-Heat Exchanger Reactor with Circular Micro-Channels [Volume 1, Issue 2, 2014, Pages 65-74]
Hoshyar, Najmeh Optimization of Preparation Factors for Cerium Oxide Synthesis as a Support for CO PrOx Catalyst [Volume 1, Issue 3, 2014, Pages 189-197]
Hoshyar, Najmeh Effect of platinum on Ceria supported Cu catalysts for PrOx process in fuel processors [Volume 1, Issue 1, 2014, Pages 1-100]
I
Irankhah, Abdullah Electrophoretic deposition of MnCr2O4 coating for solid oxide fuel cell metallic interconnects [Volume 1, Issue 1, 2014, Pages 21-26]
Irankhah, Abdullah Optimization of Preparation Factors for Cerium Oxide Synthesis as a Support for CO PrOx Catalyst [Volume 1, Issue 3, 2014, Pages 189-197]
Irankhah, Abdullah Effect of platinum on Ceria supported Cu catalysts for PrOx process in fuel processors [Volume 1, Issue 1, 2014, Pages 1-100]
Jelveh, Hussein Reforming Integrated with Oxidation in Micro-Heat Exchanger Reactor with Circular Micro-Channels [Volume 1, Issue 2, 2014, Pages 65-74]
K
Karimi Alavijeh, Masih Modeling of Multi-population Microbial Fuel and Electrolysis Cells Based on the Bioanode Potential Conditions [Volume 1, Issue 4, 2014, Pages 247-260]
Karkeabadi, Reza Hydrogen production via steam reforming of LPG on Ni/Zeolite catalysts [Volume 1, Issue 4, 2014, Pages 233-238]
Kazeminasab, Bagher Preparation of Nitrogen-Doped Graphene By Solvothermal Process as Supporting Material for Fuel Cell Catalysts [Volume 1, Issue 2, 2014, Pages 113-119]
Kermani, Mohammad Jafar Performance Improvement of PEM Fuel Cells Using Air Channel Indentation; Part I: Mechanisms to Enrich Oxygen Concentration in Catalyst Layer [Volume 1, Issue 4, 2014, Pages 199-207]
Khandan, Nahid Hydrogen production via steam reforming of LPG on Ni/Zeolite catalysts [Volume 1, Issue 4, 2014, Pages 233-238]
Kheirmand, Mehdi Oxygen reduction reaction on Pt/C at the presence of super paramagnetic of Fe3O4 nanoparticles for PEMFCs [Volume 1, Issue 1, 2014, Pages 41-46]
Kheirmand, Mehdi Single walled carbon nanotube in the reaction layer of gas diffusion electrode for oxygen reduction reaction [Volume 1, Issue 2, 2014, Pages 75-82]
M
Madram, Ali Reza Effect of temperature on kinetics of the hydrogen evolution reaction on Ni-P-C cathodes in alkaline solution [Volume 1, Issue 4, 2014, Pages 215-222]
Maghsoudipour, Amir Electrophoretic deposition of MnCr2O4 coating for solid oxide fuel cell metallic interconnects [Volume 1, Issue 1, 2014, Pages 21-26]
Maghsoudipour, Amir Co3O4 spinel protection coating for solid oxide fuel cell interconnect application [Volume 1, Issue 2, 2014, Pages 121-131]
Mahmood, Faizal Theoretical study of the effect of hydrogen addition to natural gas-fueled direct-injection engines [Volume 1, Issue 1, 2014, Pages 11-20]
Mardanpour, Mohammad Mahdi Modeling of Multi-population Microbial Fuel and Electrolysis Cells Based on the Bioanode Potential Conditions [Volume 1, Issue 4, 2014, Pages 247-260]
Mostafavi, Ebrahim La0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study [Volume 1, Issue 4, 2014, Pages 239-246]
N
Nozad Golikand, Ahmad Single walled carbon nanotube in the reaction layer of gas diffusion electrode for oxygen reduction reaction [Volume 1, Issue 2, 2014, Pages 75-82]
O
Olyaee, Saeed Modeling of measurement error in refractive index determination of fuel cell using neural network and genetic algorithm [Volume 1, Issue 2, 2014, Pages 95-104]
Omidbakhsh Amiri, Elham Reforming Integrated with Oxidation in Micro-Heat Exchanger Reactor with Circular Micro-Channels [Volume 1, Issue 2, 2014, Pages 65-74]
Ozgoli, Hassanali A Double Pipe Heat Exchanger Design and Optimization for Cooling an Alkaline Fuel Cell System [Volume 1, Issue 4, 2014, Pages 223-231]
P
Parnian, Mohammad Javad Preparation of Nitrogen-Doped Graphene By Solvothermal Process as Supporting Material for Fuel Cell Catalysts [Volume 1, Issue 2, 2014, Pages 113-119]
Pourarian, Faiz "Physical properties and electronic structure of LaNi5 compound before and after hydrogenation: An experimental and theoretical approach" [Volume 1, Issue 1, 2014, Pages 27-39]
Pourarian, Faiz Synthesis, characterization and hydrogen storage properties of Mm(Ni,Co,Mn,Al)5 alloy [Volume 1, Issue 2, 2014, Pages 83-94]
Pouretedal, Hamid Reza Effect of temperature on kinetics of the hydrogen evolution reaction on Ni-P-C cathodes in alkaline solution [Volume 1, Issue 4, 2014, Pages 215-222]
Pourmahmoud, Nader The simulation of novel annular shape on the Performance in Proton Exchange Membrane Fuel Cell [Volume 1, Issue 3, 2014, Pages 175-188]
Ramin, Farzin The effect of inclined radial flow in proton exchange membrane fuel cells performance [Volume 1, Issue 3, 2014, Pages 141-152]
Rastegari-fard, Freshteh Oxygen reduction reaction on Pt/C at the presence of super paramagnetic of Fe3O4 nanoparticles for PEMFCs [Volume 1, Issue 1, 2014, Pages 41-46]
Rowshanzamir, Soosan Preparation of Nitrogen-Doped Graphene By Solvothermal Process as Supporting Material for Fuel Cell Catalysts [Volume 1, Issue 2, 2014, Pages 113-119]
Rowshanzamir, Soosan Hydrothermal synthesis of nano-size zirconia using commercial zirconia powder: process optimization through response surface methodology [Volume 1, Issue 3, 2014, Pages 163-173]
S
Saadatinasab, Mohammad Determination of thermodynamic parameters of hydrogen permeation of palladium membrane for considering the effect of stainless steel support [Volume 1, Issue 1, 2014, Pages 1-10]
Sarhaddi, Reza "Physical properties and electronic structure of LaNi5 compound before and after hydrogenation: An experimental and theoretical approach" [Volume 1, Issue 1, 2014, Pages 27-39]
T
Taghizadeh, Majid Hydrogen production by steam reforming of dimethyle ether over Cu/ZnO/Al2O3 and H-ZSM-5 catalysts: An experimental and modeling study [Volume 1, Issue 3, 2014, Pages 153-161]
Torkavannejad, Ashkan The simulation of novel annular shape on the Performance in Proton Exchange Membrane Fuel Cell [Volume 1, Issue 3, 2014, Pages 175-188]
V
Vaezi, Mohammad JavadEffect of Dehydration Temperature on the H2 Separation Potential of Hydroxy Sodalite Zeolite Membranes [Volume 1, Issue 4, 2014, Pages 209-214]
Y
Yaghmaei, Soheila Modeling of Multi-population Microbial Fuel and Electrolysis Cells Based on the Bioanode Potential Conditions [Volume 1, Issue 4, 2014, Pages 247-260]
Yazdanshenas, Rahil Single walled carbon nanotube in the reaction layer of gas diffusion electrode for oxygen reduction reaction [Volume 1, Issue 2, 2014, Pages 75-82]
Z
Zareei, Javad Theoretical study of the effect of hydrogen addition to natural gas-fueled direct-injection engines [Volume 1, Issue 1, 2014, Pages 11-20]
Zareii, Mojtaba "Physical properties and electronic structure of LaNi5 compound before and after hydrogenation: An experimental and theoretical approach" [Volume 1, Issue 1, 2014, Pages 27-39]
Ziarati, mahmoud Hydrogen production via steam reforming of LPG on Ni/Zeolite catalysts [Volume 1, Issue 4, 2014, Pages 233-238]
Zolfaghari, Alireza Determination of thermodynamic parameters of hydrogen permeation of palladium membrane for considering the effect of stainless steel support [Volume 1, Issue 1, 2014, Pages 1-10]
