Author Index

A

  • Abbasalizadeh, Majid Thermodynamic evaluation of a novel geothermal and solar-driven multigeneration system for hydrogen and freshwater production [Volume 10, Issue 1, 2023, Pages 51-67]
  • Abdali, Saman Multi-objective optimization of a combined heat and power (CHP) cycle with a solar collector: energy, exergy and economic point of view [Volume 11, Issue 2, 2024, Pages 95-106]
  • Abdoli, Hamid Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]
  • Abdullah, Shahrir Theoretical study of the effect of hydrogen addition to natural gas-fueled direct-injection engines [Volume 1, Issue 1, 2014, Pages 11-20]
  • Abdullah Mirzaie, Rasol Single walled carbon nanotube in the reaction layer of gas diffusion electrode for oxygen reduction reaction [Volume 1, Issue 2, 2014, Pages 75-82]
  • Abdullah Mirzaie, Rasol Effect of Solution Dielectric Constant on the Preparation of Gas Diffusion Electrode Reaction Layer for the Oxygen Reduction Reaction [Volume 10, Issue 2, 2023, Pages 97-109]
  • Abedini, Ebrahim The effect of solvent of titanium precursor in the sol-gel process on the activity of TiO2 nanoparticles for H2 production [Volume 4, Issue 2, 2017, Pages 139-151]
  • Abolfazli Esfahani, Javad An Experimental Investigation on Simultaneous Effects of Oxygen Ratio and Flow-Rate in SOFCs Performance Fueled by a Mixture of Methane and Oxygen [Volume 6, Issue 1, 2019, Pages 11-22]
  • Adimi, Samira Density Functional Studies on Crystal Structure and electronic properties of Potassium Alanate as a candidate for Hydrogen storage [Volume 2, Issue 3, 2015, Pages 169-179]
  • Afsham, Neda Kinetic study of CO desorption from cathodic electrochemically treated carbon paper supported Pt electrodes [Volume 4, Issue 3, 2017, Pages 201-207]
  • Afshar, Niloofar The effect of copper infiltration on LSM Cathode microstructure in high temperature solid oxide fuel cells [Volume 10, Issue 4, 2023, Pages 281-290]
  • Agaebrahimi, Mohammad Reza Performance assessment of a SOFC cogeneration system for residential buildings located in eastern Iran [Volume 3, Issue 2, 2016, Pages 81-97]
  • Aghaeinejad-Meybodi, Abbas Silica membrane performance for hydrogen separation from methanol steam reforming products: Assessment of different multistage membrane schemes [Volume 6, Issue 1, 2019, Pages 59-70]
  • Aghajani Delavar, Mojtaba Energy Management Simulation in a PEM Fuel Cell System [Volume 2, Issue 1, 2015, Pages 1-6]
  • Aghajani Delavar, Mojtaba Lattice Boltzmann Modeling of Methane Steam Reforming Reactions in Solid Oxide Fuel Cells [Volume 7, Issue 1, 2020, Pages 61-79]
  • Ahmadi Khatir, Farzad Numerical-experimental study on the thickness distribution of metallic bipolar plates for PEM fuel cells [Volume 9, Issue 1, 2022, Pages 1-18]
  • Ajamein, Hossein Effect of Sorbitol/Oxidizer Ratio on Microwave Assisted Solution Combustion Synthesis of Copper Based Nanocatalyst for Fuel Cell Grade Hydrogen Production [Volume 2, Issue 4, 2015, Pages 227-240]
  • Akbarian, Parisa Metal‐organic framework‐derived Cu@Co4N nanoparticles anchored on N-doped carbon nanotubes for efficient and stable ORR activity [Volume 10, Issue 4, 2023, Pages 327-337]
  • Akbarian, Parisa Chemical kinetics analysis of a zinc-air fuel cell [Volume 11, Issue 1, 2024, Pages 39-45]
  • Alaei, G. Facile hydrothermal synthesis and electrochemical investigation of a free-standing cobalt oxide hierarchical nanostructure electrode on a porous carbon structure as an efficient supercapacitor [Volume 11, Issue 2, 2024, Pages 123-130]
  • AlaviSadr, Seyyed Mojtaba Synthesis, characterization and hydrogen storage properties of Mm(Ni,Co,Mn,Al)5 alloy [Volume 1, Issue 2, 2014, Pages 83-94]
  • Aliakbar Golkar, Masoud Hierarchical Control Strategy of Heat and Power for Zero Energy Buildings including Hybrid Fuel Cell/Photovoltaic Power Sources and Plug-in Electric Vehicle [Volume 3, Issue 1, 2016, Pages 33-44]
  • Alijanpour, Mohammad Energy Management Simulation in a PEM Fuel Cell System [Volume 2, Issue 1, 2015, Pages 1-6]
  • Alinoori, Amir Hosein Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]
  • Alitabar, Hossein Simulation of integrated purification systems for hydrogen production in methanol steam reforming process [Volume 10, Issue 3, 2023, Pages 158-199]
  • Alizadeh, Ebrahim Electrochemical Impedance Spectroscopy for Investigation of Different Losses in 4-cells Short Stack with Integrated Humidifier and Water Separator [Volume 3, Issue 2, 2016, Pages 127-136]
  • Alizadeh, Ebrahim Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization [Volume 3, Issue 3, 2016, Pages 183-197]
  • Allahyari, Alireza Simulation of a Solid Oxide Fuel Cell with External Steam Methane Reforming and Bypass [Volume 4, Issue 2, 2017, Pages 103-118]
  • Amedi, Hamid Reza New Mathematical Modelling and Dynamic Simulation of a Molten Carbonate Fuel Cell [Volume 2, Issue 4, 2015, Pages 241-252]
  • Ameri, Mehran Effect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system [Volume 3, Issue 4, 2016, Pages 301-313]
  • Amir, Elaheh Investigation of the catalytic performance and coke formation of nanocrystalline Ni/SrO-Al2O3 catalyst in dry reforming of methane [Volume 3, Issue 4, 2016, Pages 315-322]
  • Amirshaghaghi, Paria Hydrogen production by steam reforming of dimethyle ether over Cu/ZnO/Al2O3 and H-ZSM-5 catalysts: An experimental and modeling study [Volume 1, Issue 3, 2014, Pages 153-161]
  • Anaraki Firooz, Azam Electrochemical evaluation of electrodeposited platinum on a modified carbon substrate with cobalt, nickel and copper doped zinc oxide for the methanol oxidation reaction [Volume 5, Issue 1, 2018, Pages 49-55]
  • Arabi, Hadi "Physical properties and electronic structure of LaNi5 compound before and after hydrogenation: An experimental and theoretical approach" [Volume 1, Issue 1, 2014, Pages 27-39]
  • Arabi, Hadi Synthesis, characterization and hydrogen storage properties of Mm(Ni,Co,Mn,Al)5 alloy [Volume 1, Issue 2, 2014, Pages 83-94]
  • Arabi, Hadi Density Functional Studies on Crystal Structure and electronic properties of Potassium Alanate as a candidate for Hydrogen storage [Volume 2, Issue 3, 2015, Pages 169-179]
  • Arabi, Hadi Study the stability of Si, Ge, Fe and Co in the interior surface of metallic carbon nanotube for hydrogen storage [Volume 2, Issue 3, 2015, Pages 197-205]
  • Ariyanfar, Leyli A Double Pipe Heat Exchanger Design and Optimization for Cooling an Alkaline Fuel Cell System [Volume 1, Issue 4, 2014, Pages 223-231]
  • Arjomandbigdeli, Tara Synthesis and characterization of Ag-Y co-doped Mn-Co spinel for solid oxide fuel cell application [Volume 8, Issue 1, 2021, Pages 43-49]
  • Asadi, Samane In situ activation of a Ni catalyst with Mo ion for hydrogen evolution reaction in alkaline solution [Volume 3, Issue 2, 2016, Pages 151-158]
  • Asadi, Samane Kinetics study of hydrogen evolution reaction on a high porous three dimensional NiPC alloy [Volume 8, Issue 2, 2021, Pages 95-101]
  • Asghari, Saeed Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]
  • Ataie, Abolghasem La0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study [Volume 1, Issue 4, 2014, Pages 239-246]
  • Azami, Sayyed Mohammad Lithium-oxygen charge transfer interaction: a deformation density analysis study [Volume 11, Issue 2, 2024, Pages 117-122]
  • Azari, Khaled Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]
  • Azizi, Saba Investigation of ion transport and water content properties in anion exchange membranes based on polysulfone for solid alkaline fuel cell application [Volume 2, Issue 1, 2015, Pages 13-25]

B

  • Babaei, Alireza La0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study [Volume 1, Issue 4, 2014, Pages 239-246]
  • Babaei, Alireza Nickel oxide-gadolinium doped ceria synthesized by new methods as anodes material for solid oxide fuel cells [Volume 9, Issue 2, 2022, Pages 133-147]
  • Babaluo, Ali Akbar Effect of Dehydration Temperature on the H2 Separation Potential of Hydroxy Sodalite Zeolite Membranes [Volume 1, Issue 4, 2014, Pages 209-214]
  • Babaluo, Ali Akbar Preparation of Pd composite membrane via organic-inorganic activation method in electroless plating technique [Volume 2, Issue 3, 2015, Pages 151-158]
  • Babaluo, Ali Akbar Palladium composite membrane with high reversibility of CO2 poisoning [Volume 5, Issue 1, 2018, Pages 13-19]
  • Babaluo, Ali Akbar Nanostructured Palladium-Doped Silica Membrane Layer Synthesis for Hydrogen Separation: Effect of Activated Sublayers [Volume 6, Issue 1, 2019, Pages 1-9]
  • Babaluo*, Ali Akbar Modeling and simulation of the fluid dynamic and performance of the Pd-based membrane by CFD for hydrogen separation [Volume 9, Issue 1, 2022, Pages 19-25]
  • Bachache, Nasseer K. A New Sepic-Zeta Bidirectional Converter with High Efficiency for Renewable Energy Systems [(Articles in Press)]
  • Badrnezhad, Ramin Kinetics study of hydrogen evolution reaction on a high porous three dimensional NiPC alloy [Volume 8, Issue 2, 2021, Pages 95-101]
  • Bagheri, Ahmad Preparation and Characterization of Electrocatalyst Nanoparticles for Direct Methanol Fuel Cell Applications Using β-D-glucose as Protection Agent [Volume 4, Issue 1, 2017, Pages 1-11]
  • Bagherian Farahabadi, Hossein High Step-Up Converter with Low Voltage Stress for Fuel Cell Applications [Volume 9, Issue 2, 2022, Pages 117-132]
  • Bagherian Farahabadi, Hossein Experimental Investigation of a High Efficiency Power Path Controller for PEM Fuel Cell and Battery Hybrid System [Volume 9, Issue 2, 2022, Pages 149-161]
  • Bagherian Farahabadi, Hossein Fuel Cell Power System Conceptual Design for Unmanned Underwater Vehicle [Volume 10, Issue 1, 2023, Pages 33-50]
  • Bagherian Farahabadi, Hossein Assessment of a novel photovoltaic-electrolyzer-fuel cell-ORC hybrid energy system for hydrogen and power production [Volume 10, Issue 2, 2023, Pages 111-130]
  • Baharlou-Houreh, Nasser Parametric study of a membrane energy exchanger based on energy, entropy, and exergy analysis for proton exchange membrane fuel cell application [(Articles in Press)]
  • Baheri, Sima The effect of inclined radial flow in proton exchange membrane fuel cells performance [Volume 1, Issue 3, 2014, Pages 141-152]
  • Baheri Islami, Sima The effect of vertical injection of reactants to the membrane electrode assembly on the performance of a PEM fuel cell [Volume 3, Issue 3, 2016, Pages 167-182]
  • Baheri Islami, Sima The effect of increasing the multiplicity of flow fields contact surface on the performance of PEM fuel cell [Volume 4, Issue 1, 2017, Pages 69-83]
  • Bahri Rasht Abadi, Mohammad Mahdi How to Design a Cryogenic Joule-Thomson Cooling System: Case Study of Small Hydrogen Liquefier [Volume 3, Issue 2, 2016, Pages 113-125]
  • Bahri Rasht Abadi, Mohammad Mahdi Influence of unsuitable operational conditions on the transient performance of a small hydrogen liquefier [Volume 3, Issue 3, 2016, Pages 199-212]
  • Bakhshi, Atieh Implementation of Chitosan modified ultrafiltration hollow fiber as proton exchange membrane of ml-scale microbial fuel cells [Volume 10, Issue 4, 2023, Pages 299-310]
  • Bakhtiari, Maliheh Electrochemical evaluation of electrodeposited platinum on a modified carbon substrate with cobalt, nickel and copper doped zinc oxide for the methanol oxidation reaction [Volume 5, Issue 1, 2018, Pages 49-55]
  • Barzegari, mohammad Experimental study and numerical modeling of vibrational characteristics of a 500W PEM fuel cell stack [Volume 9, Issue 1, 2022, Pages 39-52]
  • Barzegari, Mohammad Mahdi Developed endplate geometry for uniform contact pressure distribution over PEMFC active area [Volume 7, Issue 1, 2020, Pages 1-12]
  • Barzegari, Mohammad Mahdi Design and Analysis of an Innovative Dead-end Cascade-type PEMFC Stack at Different Orientations [Volume 7, Issue 1, 2020, Pages 81-96]
  • Barzegari, Mohammad Mahdi Experimental Analysis of Fiber Laminating Effects on Flexural Rigidity of Composite Endplates for Use in PEM Fuel Cells [Volume 9, Issue 2, 2022, Pages 97-106]
  • Barzegari, Mohammad Mahdi Numerical-experimental study on the Failure Behavior of Graphite-Based Composite Bipolar Plate for PEM fuel cells [Volume 9, Issue 2, 2022, Pages 107-116]
  • Barzegari, Mohammad Mahdi Mechanical and chemical characteristics of the PEM fuel cell sealants in simulated environment [Volume 9, Issue 2, 2022, Pages 163-178]
  • Barzegari, Mohammad Mahdi Study of the forming process effects on the wrinkling and thinning percentage of the micro-channels with serpentine layout [Volume 10, Issue 1, 2023, Pages 81-93]
  • Barzegari, Mohammad Mahdi Study of Contact Pressure Distribution over MEA of the Three-Cell PEMFC with Metallic Bipolar Plates [Volume 10, Issue 1, 2023, Pages 69-79]
  • Barzegari*, Mohammad Mahdi Numerical-experimental study on the thickness distribution of metallic bipolar plates for PEM fuel cells [Volume 9, Issue 1, 2022, Pages 1-18]
  • Barzgari, Mahboobeh A two-phase, non-isothermal model for water management in the cathode gas diffusion layer of polymer electrolyte membrane fuel cells [Volume 10, Issue 3, 2023, Pages 215-231]
  • Basafa, Elahe Performance verification of a laboratory scale hydrogen/oxygen combustion chamber [Volume 9, Issue 1, 2022, Pages 27-38]
  • Basile, Angelo Silica membrane performance for hydrogen separation from methanol steam reforming products: Assessment of different multistage membrane schemes [Volume 6, Issue 1, 2019, Pages 59-70]
  • Bazooyar, Bahamin New Mathematical Modelling and Dynamic Simulation of a Molten Carbonate Fuel Cell [Volume 2, Issue 4, 2015, Pages 241-252]
  • Behbahani, Amin Hydrothermal synthesis of nano-size zirconia using commercial zirconia powder: process optimization through response surface methodology [Volume 1, Issue 3, 2014, Pages 163-173]
  • Behjatmanesh Ardakani, Reza Evaluation of electrocatalytic performance of PtCo/C nanoparticles in different proportions of cobalt for oxygen reduction reaction [Volume 10, Issue 4, 2023, Pages 291-297]
  • Beydaghi, Hossein Novel PVA/La2Ce2O7 hybrid nanocomposite membranes for application in proton exchange membrane fuel cells [Volume 1, Issue 2, 2014, Pages 105-112]
  • Beydaghi, Hossein Preparation and Characterization of Electrocatalyst Nanoparticles for Direct Methanol Fuel Cell Applications Using β-D-glucose as Protection Agent [Volume 4, Issue 1, 2017, Pages 1-11]
  • Bozorgmehri, Shahriar Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]
  • Bozorgmehri, Shahriar An Experimental Investigation on Simultaneous Effects of Oxygen Ratio and Flow-Rate in SOFCs Performance Fueled by a Mixture of Methane and Oxygen [Volume 6, Issue 1, 2019, Pages 11-22]
  • Bozorgmehri, Shahriar Lattice Boltzmann Modeling of Methane Steam Reforming Reactions in Solid Oxide Fuel Cells [Volume 7, Issue 1, 2020, Pages 61-79]

C

  • COLPAN, CAN OZGUR Numerical investigation of methanol crossover through the membrane in a direct methanol fuel cell [Volume 5, Issue 1, 2018, Pages 21-33]

D

  • Dadashi Firouzjaei, Kamran Experimental Study of Oxidant Effect on Lifetime of PEM Fuel Cell [Volume 7, Issue 1, 2020, Pages 33-43]
  • Dadashi Firouzjaei, Kamran New criterion for achieving efficient flow fields in PEM fuel cells [Volume 11, Issue 1, 2024, Pages 46-67]
  • Daneshtalab, Reza A high performance lithium-ion battery using LiNa0.02K0.01FePO4/C as cathode material and anatase TiO2 nanotube arrays as anode material [Volume 4, Issue 1, 2017, Pages 27-35]
  • Darab, Mahdi Optimum calcination temperature for the synthesis of nanostructured alumina for energy storage heat management applications [Volume 11, Issue 1, 2024, Pages 8-18]
  • Darabi, Zeinab Modeling and simulation of the fluid dynamic and performance of the Pd-based membrane by CFD for hydrogen separation [Volume 9, Issue 1, 2022, Pages 19-25]
  • Dashtizad, valiollah Synthesis Zr-Co-Y based chemical getter and evaluation its vacuum preserving, sorption characteristics, and hydrogen absorption [Volume 6, Issue 2, 2019, Pages 171-184]
  • Dehghani, Majid Small signal stability analysis and frequency control in a single-area multi-source electrical energy system [Volume 11, Issue 2, 2024, Pages 107-116]
  • Delshad, Majid Analysis and implementation of high step-up SEPIC converter without coupled inductor for high voltage applications [Volume 10, Issue 3, 2023, Pages 201-213]
  • Delshad, Majid A New Sepic-Zeta Bidirectional Converter with High Efficiency for Renewable Energy Systems [(Articles in Press)]
  • Domairry Ganji, Davood Lattice Boltzmann Modeling of Methane Steam Reforming Reactions in Solid Oxide Fuel Cells [Volume 7, Issue 1, 2020, Pages 61-79]

E

  • Ebrahimi, Atiyeh Effect of batch vs. continuous mode of operation on microbial desalination cell performance treating municipal wastewater [Volume 3, Issue 4, 2016, Pages 281-290]
  • Ebrahimi, Fateme Facile hydrothermal synthesis and electrochemical investigation of a free-standing cobalt oxide hierarchical nanostructure electrode on a porous carbon structure as an efficient supercapacitor [Volume 11, Issue 2, 2024, Pages 123-130]
  • Ebrahimpour, Reza Modeling of measurement error in refractive index determination of fuel cell using neural network and genetic algorithm [Volume 1, Issue 2, 2014, Pages 95-104]
  • Eikani, Mohammad Hasan Enhancing the CO tolerance of Pt/C as PEM fuel cell anode catalyst by modifying the catalyst synthesis method [Volume 6, Issue 1, 2019, Pages 71-81]
  • Eikani *, Mohammad H. Three-dimensional modeling of transport phenomena in a planar anode-supported solid oxide fuel cell [Volume 4, Issue 1, 2017, Pages 37-52]
  • Elhami, Mohammad-Reza Numerical analysis of reactant transport in the novel tubular polymer electrolyte membrane fuel cells [Volume 2, Issue 3, 2015, Pages 181-196]
  • Eliassi, Ali Hydrogen production by steam reforming of dimethyle ether over Cu/ZnO/Al2O3 and H-ZSM-5 catalysts: An experimental and modeling study [Volume 1, Issue 3, 2014, Pages 153-161]
  • Emami, Leyla Numerical-experimental study on the Failure Behavior of Graphite-Based Composite Bipolar Plate for PEM fuel cells [Volume 9, Issue 2, 2022, Pages 107-116]
  • Emamifar, Armin Performance assessment of a power/refrigeration cogeneration system driven by the waste heat of a solid oxide fuel cell [Volume 10, Issue 3, 2023, Pages 241-256]
  • Emamifar*, Armin Thermodynamic and exergoeconomic evaluation of waste heat recovery for hydrogen production in a CCHP system [Volume 9, Issue 1, 2022, Pages 53-68]
  • Emhanna, Saleh A. Prospects and challenges for the production and use of green hydrogen as a promising energy in Libya [Volume 11, Issue 1, 2024, Pages 1-7]
  • Enhessari, Morteza Novel PVA/La2Ce2O7 hybrid nanocomposite membranes for application in proton exchange membrane fuel cells [Volume 1, Issue 2, 2014, Pages 105-112]
  • Esfandeh, Somayeh Modeling of measurement error in refractive index determination of fuel cell using neural network and genetic algorithm [Volume 1, Issue 2, 2014, Pages 95-104]
  • Eshghi, Abolfath Electrodeposition of platinum nanoparticles on reduced graphene oxide as an efficient catalyst for oxygen reduction reaction [Volume 2, Issue 1, 2015, Pages 7-12]
  • Eshghi, Abolfath Palladium nanoparticles supported on carbon black powder as an effective anodic catalyst for application in a direct glucose alkaline fuel cell [Volume 3, Issue 1, 2016, Pages 11-17]
  • Eskandarijam, Jafar Numerical-experimental study on the Failure Behavior of Graphite-Based Composite Bipolar Plate for PEM fuel cells [Volume 9, Issue 2, 2022, Pages 107-116]
  • Esmaeilifar, Ashkan Hydrothermal synthesis of nano-size zirconia using commercial zirconia powder: process optimization through response surface methodology [Volume 1, Issue 3, 2014, Pages 163-173]
  • Esmailian, Mohammad The Effect of Pre- Stretching Treatment on the Microstructure, Mechanical Properties and Corrosion Resistance of 7075 Aluminum Alloy used in PEMFC [Volume 10, Issue 3, 2023, Pages 233-239]

F

  • Fallah, Narges Kinetic study of CO desorption from cathodic electrochemically treated carbon paper supported Pt electrodes [Volume 4, Issue 3, 2017, Pages 201-207]
  • Fani, Bahador Analysis and implementation of high step-up SEPIC converter without coupled inductor for high voltage applications [Volume 10, Issue 3, 2023, Pages 201-213]
  • Fani, Bahador A New Sepic-Zeta Bidirectional Converter with High Efficiency for Renewable Energy Systems [(Articles in Press)]
  • Farhadi, Mousa Energy Management Simulation in a PEM Fuel Cell System [Volume 2, Issue 1, 2015, Pages 1-6]
  • Farhadian, Nafiseh Prediction the hydrogen adsorption isotherm on nickel decorated carbon nanotubes by applying artificial neural network modeling [Volume 8, Issue 2, 2021, Pages 61-68]
  • FARNAK, MOSTAFA An Experimental Investigation on Simultaneous Effects of Oxygen Ratio and Flow-Rate in SOFCs Performance Fueled by a Mixture of Methane and Oxygen [Volume 6, Issue 1, 2019, Pages 11-22]
  • Farzad, Mohammad Ali Performance assessment of a SOFC cogeneration system for residential buildings located in eastern Iran [Volume 3, Issue 2, 2016, Pages 81-97]
  • Farzaneh, Farshid Iranian hydrogen production insight: research trends and outlook [Volume 8, Issue 1, 2021, Pages 23-33]
  • Fathi, Hossein The Impact of Wettability on Effective Properties of Cathode Catalyst Layer in a Proton Exchange Membrane Fuel Cell [Volume 3, Issue 3, 2016, Pages 233-245]
  • Fathollahi Zonouz, Abolfazl Effect of temperature on kinetics of the hydrogen evolution reaction on Ni-P-C cathodes in alkaline solution [Volume 1, Issue 4, 2014, Pages 215-222]
  • Fattahzadeh, Mehrdad Synthesis Zr-Co-Y based chemical getter and evaluation its vacuum preserving, sorption characteristics, and hydrogen absorption [Volume 6, Issue 2, 2019, Pages 171-184]
  • Fili, Mohammad Hossein Modeling and experimental study on the sealing gasket of proton exchange membrane fuel cells [Volume 3, Issue 3, 2016, Pages 213-220]

G

  • Ganjali, Mohammad Reza Facile Synthesis of N, S-Doped Graphene from Sulfur Trioxide Pyridine Precursor for the Oxygen Reduction Reaction [Volume 4, Issue 3, 2017, Pages 231-240]
  • Gashoul, Fatemeh Studies on the SPEEK membrane with low degree of sulfonation as a stable proton exchange membrane for fuel cell applications [Volume 3, Issue 3, 2016, Pages 221-232]
  • Ghadamian, Hossein A Double Pipe Heat Exchanger Design and Optimization for Cooling an Alkaline Fuel Cell System [Volume 1, Issue 4, 2014, Pages 223-231]
  • Ghadamian, Hossein Energy Price Analysis of a Biomass Gasification-Solid Oxide Fuel Cell-Gas Turbine Power Plant [Volume 3, Issue 1, 2016, Pages 45-58]
  • Ghaderi, Serveh Ni@Pt core-shell nanoparticles as an improved electrocatalyst for ethanol electrooxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 109-119]
  • Ghaderi, Serveh Ethanol electrooxidation on the Co@Pt core-shell nanoparticles modified carbon-ceramic electrode in acidic and alkaline media [Volume 3, Issue 1, 2016, Pages 19-31]
  • Ghadimi, Mojtaba Developed endplate geometry for uniform contact pressure distribution over PEMFC active area [Volume 7, Issue 1, 2020, Pages 1-12]
  • Ghafarian-Zahmatkesh, Hossein Preparation and Characterization of Electrocatalyst Nanoparticles for Direct Methanol Fuel Cell Applications Using β-D-glucose as Protection Agent [Volume 4, Issue 1, 2017, Pages 1-11]
  • Ghaffari, M.D. Sulfurous Analysis of Bioelectricity Generation from Sulfate-reducing Bacteria (SRB) in a Microbial Fuel Cell [Volume 4, Issue 4, 2017, Pages 307-321]
  • Ghafouri Roozbahani, Mohammad Ali Hydrogen production via steam reforming of LPG on Ni/Zeolite catalysts [Volume 1, Issue 4, 2014, Pages 233-238]
  • Ghafouri Roozbahani, Mohammad Ali Methanol steam reforming; Effects of various metal oxides on the properties of a Cu-based catalyst [Volume 3, Issue 4, 2016, Pages 291-299]
  • Ghamari Arbati, Somayeh Preparation, characterization and the study of electrochemical behavior of Y-doped Bariumcerate powders by new precursors [Volume 10, Issue 1, 2023, Pages 1-10]
  • Ghamari Arbati, Somayeh Nickel oxide-gadolinium doped ceria synthesized by new methods as anodes material for solid oxide fuel cells [Volume 9, Issue 2, 2022, Pages 133-147]
  • Ghanbarian, Asrin Performance Improvement of PEM Fuel Cells Using Air Channel Indentation; Part I: Mechanisms to Enrich Oxygen Concentration in Catalyst Layer [Volume 1, Issue 4, 2014, Pages 199-207]
  • Ghanbarian, Asrin Generalization of a CFD Model to Predict the Net Power in PEM Fuel Cells [Volume 6, Issue 1, 2019, Pages 23-37]
  • Ghanbarlou, Hosna Preparation of Nitrogen-Doped Graphene By Solvothermal Process as Supporting Material for Fuel Cell Catalysts [Volume 1, Issue 2, 2014, Pages 113-119]
  • Ghani Harzand, Ayda Synthesis and electrochemical properties of Sr3Fe1.8Co0.2O7 as a solid oxide fuel cell cathode [Volume 8, Issue 1, 2021, Pages 51-58]
  • Gharibi, Hussein Determination of thermodynamic parameters of hydrogen permeation of palladium membrane for considering the effect of stainless steel support [Volume 1, Issue 1, 2014, Pages 1-10]
  • Gharibi, Hussein One –step synthesis of PdCo alloy nanoparticles decorated on reduced grahene oxide as an Electro-catalyst for Oxygen Reduction Reaction in Passive Direct Methanol Fuel Cells [Volume 2, Issue 1, 2015, Pages 27-33]
  • Gharibi, Hussein Effect of Solution Dielectric Constant on the Preparation of Gas Diffusion Electrode Reaction Layer for the Oxygen Reduction Reaction [Volume 10, Issue 2, 2023, Pages 97-109]
  • Ghasemian, Mehran New criterion for achieving efficient flow fields in PEM fuel cells [Volume 11, Issue 1, 2024, Pages 46-67]
  • Ghasemi Tamami, Peyman Investigation and optimization of a PEM fuel cell’s electrical and mechanical behavior [Volume 3, Issue 1, 2016, Pages 1-10]
  • Ghasemi Tamami, Peyman Modeling and experimental study on the sealing gasket of proton exchange membrane fuel cells [Volume 3, Issue 3, 2016, Pages 213-220]
  • Ghasemi Tamami, Peyman Design and Investigation of Honeycomb End Plates for PEM Fuel Cells [Volume 4, Issue 3, 2017, Pages 189-199]
  • Ghasemzadeh, Kamran Silica membrane performance for hydrogen separation from methanol steam reforming products: Assessment of different multistage membrane schemes [Volume 6, Issue 1, 2019, Pages 59-70]
  • Ghiasi, Mohammad Iman Hierarchical Control Strategy of Heat and Power for Zero Energy Buildings including Hybrid Fuel Cell/Photovoltaic Power Sources and Plug-in Electric Vehicle [Volume 3, Issue 1, 2016, Pages 33-44]
  • Gholamian, Ehsan Comparison of waste heat recovery from a Proton Exchange Membrane fuel cell by gas turbine or Organic Rankin Cycle: a display of 3E analysis [Volume 8, Issue 2, 2021, Pages 103-112]
  • Gholaminezad, Iman Synthesis and investigation on microstructure and electrical conductivity of Ruddlesden-Popper phase, La1.9Sr0.1Ni0.7Cu0.3O4 (LSNC), as cathode material for intermediate temperature solid oxide fuel cells [Volume 8, Issue 2, 2021, Pages 69-76]
  • Gholizade Atani, Ahmad Nanostructured Palladium-Doped Silica Membrane Layer Synthesis for Hydrogen Separation: Effect of Activated Sublayers [Volume 6, Issue 1, 2019, Pages 1-9]
  • Gholy Nejad, Puriya Mohamad Numerical study on the performance prediction of a proton exchange membrane (PEM) fuel cell [Volume 4, Issue 4, 2017, Pages 249-263]
  • Ghorbani, Hamid A sensorless adaptive non-linear control scheme for minimizing the stator energy losses of IPMSM [Volume 11, Issue 2, 2024, Pages 131-141]
  • Ghorbani, Shaban Reza Density Functional Studies on Crystal Structure and electronic properties of Potassium Alanate as a candidate for Hydrogen storage [Volume 2, Issue 3, 2015, Pages 169-179]
  • Golkar, Masoud Optimal Intelligent Control of Plug-in Fuel Cell Electric Vehicles in Smart Electric Grids [Volume 1, Issue 1, 2014, Pages 55-64]
  • Golkar, Seyed Hadi Modeling and Optimization of non - isothermal two- phase flow in the cathode gas diffusion layer of PEM fuel cell [Volume 2, Issue 3, 2015, Pages 159-168]
  • Golmohammad, Mohammad Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]
  • Golmohammad, Mohammad Iranian hydrogen production insight: research trends and outlook [Volume 8, Issue 1, 2021, Pages 23-33]
  • Golmohammad, Mohammad Synthesis and characterization of nanostructured Cux (Mn1.5-x/2Co1.5-x/2)O4 as an interconnect coating for solid oxide fuel cell [Volume 8, Issue 1, 2021, Pages 35-41]
  • Golmohammad, Mohammad Synthesis and electrochemical properties of Sr3Fe1.8Co0.2O7 as a solid oxide fuel cell cathode [Volume 8, Issue 1, 2021, Pages 51-58]
  • Golmohammad**, Mohammad Synthesis and characterization of Ag-Y co-doped Mn-Co spinel for solid oxide fuel cell application [Volume 8, Issue 1, 2021, Pages 43-49]
  • Golzari, Alireza New Mathematical Modelling and Dynamic Simulation of a Molten Carbonate Fuel Cell [Volume 2, Issue 4, 2015, Pages 241-252]

H

  • Habibi, Biuck Ni@Pt core-shell nanoparticles as an improved electrocatalyst for ethanol electrooxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 109-119]
  • Habibnia, Mostafa Investigation and optimization of a PEM fuel cell’s electrical and mechanical behavior [Volume 3, Issue 1, 2016, Pages 1-10]
  • Habibnia, Mostafa Modeling and experimental study on the sealing gasket of proton exchange membrane fuel cells [Volume 3, Issue 3, 2016, Pages 213-220]
  • Habibnia, Mostafa Design and Investigation of Honeycomb End Plates for PEM Fuel Cells [Volume 4, Issue 3, 2017, Pages 189-199]
  • Habibnia, Mostafa Developed endplate geometry for uniform contact pressure distribution over PEMFC active area [Volume 7, Issue 1, 2020, Pages 1-12]
  • Habibpour, Razeih Interaction of atomic hydrogen with monometallic Au(100), Cu(100), Pt(100) surfaces and surface of bimetallic Au@Cu(100), Au@Pt(100) overlayer systems: The role of magnetism [Volume 4, Issue 3, 2017, Pages 209-218]
  • Habibzadeh, Amin Thermodynamic evaluation of a novel geothermal and solar-driven multigeneration system for hydrogen and freshwater production [Volume 10, Issue 1, 2023, Pages 51-67]
  • Haghani, Ahmad Generating electricity using pico hydro-based power plant in Koohrang county, Iran: effect of energy storage type [Volume 11, Issue 1, 2024, Pages 19-38]
  • Haghighi, Mohammad Effect of Sorbitol/Oxidizer Ratio on Microwave Assisted Solution Combustion Synthesis of Copper Based Nanocatalyst for Fuel Cell Grade Hydrogen Production [Volume 2, Issue 4, 2015, Pages 227-240]
  • Haghigi, Mohmmad Preparation of Pd composite membrane via organic-inorganic activation method in electroless plating technique [Volume 2, Issue 3, 2015, Pages 151-158]
  • Hajizadeh, Amin Optimal Intelligent Control of Plug-in Fuel Cell Electric Vehicles in Smart Electric Grids [Volume 1, Issue 1, 2014, Pages 55-64]
  • Hajizadeh, Amin Hierarchical Control Strategy of Heat and Power for Zero Energy Buildings including Hybrid Fuel Cell/Photovoltaic Power Sources and Plug-in Electric Vehicle [Volume 3, Issue 1, 2016, Pages 33-44]
  • Hassani, Mojtaba Experimental Study of Oxidant Effect on Lifetime of PEM Fuel Cell [Volume 7, Issue 1, 2020, Pages 33-43]
  • Hassaninejad-Darzi, Seyed Karim Electrocatalytic oxidation of glucose on the modified carbon paste electrode with sodalite nanozeolite for fuel cell [Volume 2, Issue 1, 2015, Pages 47-58]
  • Hassanzadeh, Hasan A two-phase, non-isothermal model for water management in the cathode gas diffusion layer of polymer electrolyte membrane fuel cells [Volume 10, Issue 3, 2023, Pages 215-231]
  • Hassanzadeh, Hassan Modeling heat and mass transfer in laminar forced flow between parallel plates channel imposed to suction or injection [Volume 2, Issue 1, 2015, Pages 35-46]
  • Hassanzadeh, Hassan Modeling and Optimization of non - isothermal two- phase flow in the cathode gas diffusion layer of PEM fuel cell [Volume 2, Issue 3, 2015, Pages 159-168]
  • Hassanzadeh, Hassan Performance assessment of a SOFC cogeneration system for residential buildings located in eastern Iran [Volume 3, Issue 2, 2016, Pages 81-97]
  • Hassanzadeh, Hassan Effect of CO in the reformatted fuel on the performance of Polymer Electrolyte Membrane (PEM) fuel cell [Volume 4, Issue 2, 2017, Pages 153-165]
  • Hassanzadeh, Hassan Lattice Boltzmann simulation of water transfer in gas diffusion layers with porosity gradient of polymer electrolyte membrane fuel cells with parallel processing on GPU [Volume 7, Issue 1, 2020, Pages 45-60]
  • Hassanzadeh, Hassan Modeling of mass transfer in a T-shaped microfluidic fuel cell [Volume 10, Issue 2, 2023, Pages 147-156]
  • HAZZAB, Abdaldjabar Development and Simulation of a PEM Fuel Cell model for Prediction of Water Content and Power Generation [Volume 4, Issue 4, 2017, Pages 289-299]
  • Hedayati, Ali Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]
  • Heydaran-Daroogheh-Amnyieh, Zahra Analysis and implementation of high step-up SEPIC converter without coupled inductor for high voltage applications [Volume 10, Issue 3, 2023, Pages 201-213]
  • Hooshyari, Khadijeh Novel PVA/La2Ce2O7 hybrid nanocomposite membranes for application in proton exchange membrane fuel cells [Volume 1, Issue 2, 2014, Pages 105-112]
  • Hooshyari, Khadijeh Preparation and Characterization of Electrocatalyst Nanoparticles for Direct Methanol Fuel Cell Applications Using β-D-glucose as Protection Agent [Volume 4, Issue 1, 2017, Pages 1-11]
  • Hormozi, Faramarz Reforming Integrated with Oxidation in Micro-Heat Exchanger Reactor with Circular Micro-Channels [Volume 1, Issue 2, 2014, Pages 65-74]
  • Hoshyar, Najmeh Optimization of Preparation Factors for Cerium Oxide Synthesis as a Support for CO PrOx Catalyst [Volume 1, Issue 3, 2014, Pages 189-197]
  • Hoshyar, Najmeh Effect of platinum on Ceria supported Cu catalysts for PrOx process in fuel processors [Volume 1, Issue 1, 2014, Pages 1-100]
  • Hossainpour, Siamak The effect of vertical injection of reactants to the membrane electrode assembly on the performance of a PEM fuel cell [Volume 3, Issue 3, 2016, Pages 167-182]
  • Hossainpour, Siamak The effect of increasing the multiplicity of flow fields contact surface on the performance of PEM fuel cell [Volume 4, Issue 1, 2017, Pages 69-83]
  • Hosseini, S.Vahid Study the stability of Si, Ge, Fe and Co in the interior surface of metallic carbon nanotube for hydrogen storage [Volume 2, Issue 3, 2015, Pages 197-205]

I

  • Imanlou, Sanaz Synthesis and investigation on microstructure and electrical conductivity of Ruddlesden-Popper phase, La1.9Sr0.1Ni0.7Cu0.3O4 (LSNC), as cathode material for intermediate temperature solid oxide fuel cells [Volume 8, Issue 2, 2021, Pages 69-76]
  • Imanzadeh, Hamideh Platinum nanoparticles/functionalized carbon nanoparticles composites supported on the carbon-ceramic electrode and their electroactivity for ethanol oxidation [Volume 5, Issue 1, 2018, Pages 35-47]
  • Irankhah, Abdullah Optimization of Preparation Factors for Cerium Oxide Synthesis as a Support for CO PrOx Catalyst [Volume 1, Issue 3, 2014, Pages 189-197]
  • Irankhah, Abdullah Effect of platinum on Ceria supported Cu catalysts for PrOx process in fuel processors [Volume 1, Issue 1, 2014, Pages 1-100]
  • Iranmanesh, Masoud Effect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system [Volume 3, Issue 4, 2016, Pages 301-313]
  • Iravaninia, Mona Investigation of ion transport and water content properties in anion exchange membranes based on polysulfone for solid alkaline fuel cell application [Volume 2, Issue 1, 2015, Pages 13-25]
  • Isapour, Zahra Synthesis and characterization of Ag-Y co-doped Mn-Co spinel for solid oxide fuel cell application [Volume 8, Issue 1, 2021, Pages 43-49]

J

  • Jabbari, Amin Additive Manufactured Parts Specifications and Applications in Catalytic Substrates and Fuel Cells [Volume 10, Issue 2, 2023, Pages 173-181]
  • Jabbari, Zeinab Kinetic study of CO desorption from cathodic electrochemically treated carbon paper supported Pt electrodes [Volume 4, Issue 3, 2017, Pages 201-207]
  • Jahangiri, Mehdi Generating electricity using pico hydro-based power plant in Koohrang county, Iran: effect of energy storage type [Volume 11, Issue 1, 2024, Pages 19-38]
  • Jahanshahi Javaran, Ebrahim Lattice Boltzmann simulation of water transfer in gas diffusion layers with porosity gradient of polymer electrolyte membrane fuel cells with parallel processing on GPU [Volume 7, Issue 1, 2020, Pages 45-60]
  • Jahantigh, nabi Parametric study of the influence of cooling channel dimensions on PEM fuel cell thermal performance [Volume 4, Issue 4, 2017, Pages 265-274]
  • Jamali Ghahderijani, Mehdi Investigation of vessels pressure effect on PEM electrolyzer performance by using a new OneDimensional Dynamic Model [Volume 2, Issue 4, 2015, Pages 271-281]
  • Jamshidi, Sona Preparation of Pd composite membrane via organic-inorganic activation method in electroless plating technique [Volume 2, Issue 3, 2015, Pages 151-158]
  • Jamshidi, Sona Palladium composite membrane with high reversibility of CO2 poisoning [Volume 5, Issue 1, 2018, Pages 13-19]
  • Javaheri, Masoumeh Using the Palladium as core and Platinum as shell for ORR [Volume 1, Issue 3, 2014, Pages 133-139]
  • Javanbakht, Mehram Electrochemical Study of Hydrogen Adsorption/Reduction (HAR) Reaction on Graphene Oxide as Electrocatalyst for Proton Exchange Membrane Fuel Cells [Volume 2, Issue 2, 2015, Pages 99-107]
  • Javanbakht, Mehran Novel PVA/La2Ce2O7 hybrid nanocomposite membranes for application in proton exchange membrane fuel cells [Volume 1, Issue 2, 2014, Pages 105-112]
  • Javanbakht, Mehran Synthesis of Supported Pt Alloy three Dimensional Rhombus Shapes Nanoparticles for Oxygen Reduction Reaction [Volume 2, Issue 2, 2015, Pages 121-130]
  • Javanbakht, Mehran Preparation and Characterization of Electrocatalyst Nanoparticles for Direct Methanol Fuel Cell Applications Using β-D-glucose as Protection Agent [Volume 4, Issue 1, 2017, Pages 1-11]
  • Javanbakht, Mehran Kinetic study of CO desorption from cathodic electrochemically treated carbon paper supported Pt electrodes [Volume 4, Issue 3, 2017, Pages 201-207]
  • Jayachandraiah, B. Thermoexergetic analysis of common rail direct injection diesel engine on optimized multiple injection strategy of performance and emission using congress grass tamarind shell co-pyrolysis oil blend and diesel [Volume 11, Issue 2, 2024, Pages 78-94]
  • Jelveh, Hussein Reforming Integrated with Oxidation in Micro-Heat Exchanger Reactor with Circular Micro-Channels [Volume 1, Issue 2, 2014, Pages 65-74]
  • Jomekian, Abolfazl New Mathematical Modelling and Dynamic Simulation of a Molten Carbonate Fuel Cell [Volume 2, Issue 4, 2015, Pages 241-252]

K

  • Kadhim, Akram Qasim A New Sepic-Zeta Bidirectional Converter with High Efficiency for Renewable Energy Systems [(Articles in Press)]
  • Kadier, Abudukeremu The significance of key operational variables to the enhancement of hydrogen production in a single-chamber microbial electrolysis cell (MEC) [Volume 2, Issue 2, 2015, Pages 85-97]
  • Kaflou, Ali Morphological and physical study of Cu-Ni sintered porous wicks used in heat pipes and fuel cells [Volume 3, Issue 4, 2016, Pages 255-266]
  • Kaflou, Ali Synthesis Zr-Co-Y based chemical getter and evaluation its vacuum preserving, sorption characteristics, and hydrogen absorption [Volume 6, Issue 2, 2019, Pages 171-184]
  • Kakaei, Karim One –step synthesis of PdCo alloy nanoparticles decorated on reduced grahene oxide as an Electro-catalyst for Oxygen Reduction Reaction in Passive Direct Methanol Fuel Cells [Volume 2, Issue 1, 2015, Pages 27-33]
  • Kalil, Mohd Sahaid The significance of key operational variables to the enhancement of hydrogen production in a single-chamber microbial electrolysis cell (MEC) [Volume 2, Issue 2, 2015, Pages 85-97]
  • Kamvar, Majid Comparative Numerical Study of Co- and Counter-Flow Configurations of an All-Porous Solid Oxide Fuel Cell [Volume 8, Issue 2, 2021, Pages 77-93]
  • Kamvar, Majid Numerical Investigation of a Hydrogen-fuelled Planar AP-SOFC Performance with Special Focus on Safe Operation [Volume 8, Issue 2, 2021, Pages 113-125]
  • Karami, Zohreh Numerical study on the performance prediction of a proton exchange membrane (PEM) fuel cell [Volume 4, Issue 4, 2017, Pages 249-263]
  • Karimi, Aida Dynamic investigation of hydrocarbon proton exchange membrane Fuel Cell [Volume 4, Issue 3, 2017, Pages 219-230]
  • Karimi Alavijeh, Masih Modeling of Multi-population Microbial Fuel and Electrolysis Cells Based on the Bioanode Potential Conditions [Volume 1, Issue 4, 2014, Pages 247-260]
  • Karkeabadi, Reza Hydrogen production via steam reforming of LPG on Ni/Zeolite catalysts [Volume 1, Issue 4, 2014, Pages 233-238]
  • Kashi, Eslam Interaction of atomic hydrogen with monometallic Au(100), Cu(100), Pt(100) surfaces and surface of bimetallic Au@Cu(100), Au@Pt(100) overlayer systems: The role of magnetism [Volume 4, Issue 3, 2017, Pages 209-218]
  • Kazemi, Namdar Extremely Fast Simulation of the Li--Ion Batteries Governing Equations [Volume 10, Issue 4, 2023, Pages 339-353]
  • Kazeminasab, Bagher Preparation of Nitrogen-Doped Graphene By Solvothermal Process as Supporting Material for Fuel Cell Catalysts [Volume 1, Issue 2, 2014, Pages 113-119]
  • Kazerouni, H. Sulfurous Analysis of Bioelectricity Generation from Sulfate-reducing Bacteria (SRB) in a Microbial Fuel Cell [Volume 4, Issue 4, 2017, Pages 307-321]
  • Kebria, Daryoush Effect of batch vs. continuous mode of operation on microbial desalination cell performance treating municipal wastewater [Volume 3, Issue 4, 2016, Pages 281-290]
  • Kermani, Mohammad Jafar Performance Improvement of PEM Fuel Cells Using Air Channel Indentation; Part I: Mechanisms to Enrich Oxygen Concentration in Catalyst Layer [Volume 1, Issue 4, 2014, Pages 199-207]
  • Kermani, Mohammad Jafar Generalization of a CFD Model to Predict the Net Power in PEM Fuel Cells [Volume 6, Issue 1, 2019, Pages 23-37]
  • Khalilian, Morteza Thermodynamic investigation of applying a thermoelectric generator to produce hydrogen in a multigeneration system [Volume 10, Issue 2, 2023, Pages 131-145]
  • Khandan, Nahid Hydrogen production via steam reforming of LPG on Ni/Zeolite catalysts [Volume 1, Issue 4, 2014, Pages 233-238]
  • Khandan, Nahid Optimization of the preparation procedure of Ni/Al2O3 catalyst for steam reforming of n-butane [Volume 2, Issue 3, 2015, Pages 139-149]
  • Khandan, Nahid Methanol steam reforming; Effects of various metal oxides on the properties of a Cu-based catalyst [Volume 3, Issue 4, 2016, Pages 291-299]
  • Khandan, Nahid Enhancing the CO tolerance of Pt/C as PEM fuel cell anode catalyst by modifying the catalyst synthesis method [Volume 6, Issue 1, 2019, Pages 71-81]
  • Kheirmand, Mehdi Oxygen reduction reaction on Pt/C at the presence of super paramagnetic of Fe3O4 nanoparticles for PEMFCs [Volume 1, Issue 1, 2014, Pages 41-46]
  • Kheirmand, Mehdi Single walled carbon nanotube in the reaction layer of gas diffusion electrode for oxygen reduction reaction [Volume 1, Issue 2, 2014, Pages 75-82]
  • Kheirmand, Mehdi Electrodeposition of platinum nanoparticles on reduced graphene oxide as an efficient catalyst for oxygen reduction reaction [Volume 2, Issue 1, 2015, Pages 7-12]
  • Kheirmand, Mehdi Palladium nanoparticles supported on carbon black powder as an effective anodic catalyst for application in a direct glucose alkaline fuel cell [Volume 3, Issue 1, 2016, Pages 11-17]
  • Kheirmand, Mehdi Effect of Solution Dielectric Constant on the Preparation of Gas Diffusion Electrode Reaction Layer for the Oxygen Reduction Reaction [Volume 10, Issue 2, 2023, Pages 97-109]
  • Kheirmand, Mehdi Evaluation of electrocatalytic performance of PtCo/C nanoparticles in different proportions of cobalt for oxygen reduction reaction [Volume 10, Issue 4, 2023, Pages 291-297]
  • Kheirmand, Mehdi Metal‐organic framework‐derived Cu@Co4N nanoparticles anchored on N-doped carbon nanotubes for efficient and stable ORR activity [Volume 10, Issue 4, 2023, Pages 327-337]
  • Kheirmand, Mehdi Chemical kinetics analysis of a zinc-air fuel cell [Volume 11, Issue 1, 2024, Pages 39-45]
  • Kheirmand, Mehdi Lithium-oxygen charge transfer interaction: a deformation density analysis study [Volume 11, Issue 2, 2024, Pages 117-122]
  • Kheradmandinia, Shaker Enhancing the CO tolerance of Pt/C as PEM fuel cell anode catalyst by modifying the catalyst synthesis method [Volume 6, Issue 1, 2019, Pages 71-81]
  • KhodadyKoochacsaraiy, Raheleh Mechanical behavior of metal hydrides and hydrogen storage containers: A review [Volume 10, Issue 3, 2023, Pages 257-278]
  • Khodaei, Milad Modeling and simulation of the fluid dynamic and performance of the Pd-based membrane by CFD for hydrogen separation [Volume 9, Issue 1, 2022, Pages 19-25]
  • Khorshidian, M A review of the main mechanisms of catalyst layer degradation in polymer electrolyte membrane fuel cell (PEMFC) and different performance recovery methods [Volume 6, Issue 2, 2019, Pages 91-115]
  • Khorshidian, Majid Electrochemical Impedance Spectroscopy for Investigation of Different Losses in 4-cells Short Stack with Integrated Humidifier and Water Separator [Volume 3, Issue 2, 2016, Pages 127-136]
  • Khorshidian, Majid Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization [Volume 3, Issue 3, 2016, Pages 183-197]
  • KIRKGEÇİt, Rabia Synthesis and Characterization of Co-doped CeO2 Ceramic Electrolyte for IT-SOFC [Volume 6, Issue 2, 2019, Pages 163-170]
  • Kiyani, Roya Multi-walled carbon nanotubes supported palladium nanoparticles: Synthesis, characterization and catalytic activity towards methanol electro oxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 67-74]
  • Kojoury-Naftchali, Mostafa High Step-Up Converter with Low Voltage Stress for Fuel Cell Applications [Volume 9, Issue 2, 2022, Pages 117-132]
  • Koosha, Morteza Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]
  • Kord Firuzjaei, Vahid Simulation of integrated purification systems for hydrogen production in methanol steam reforming process [Volume 10, Issue 3, 2023, Pages 158-199]
  • Kouzegar, Zahra Preparation of Pd composite membrane via organic-inorganic activation method in electroless plating technique [Volume 2, Issue 3, 2015, Pages 151-158]

L

  • Logrono, Washington The significance of key operational variables to the enhancement of hydrogen production in a single-chamber microbial electrolysis cell (MEC) [Volume 2, Issue 2, 2015, Pages 85-97]
  • Lohrasbi, Elaheh Synthesis of Supported Pt Alloy three Dimensional Rhombus Shapes Nanoparticles for Oxygen Reduction Reaction [Volume 2, Issue 2, 2015, Pages 121-130]
  • Lohrasbi, Elaheh Effect of Solution Dielectric Constant on the Preparation of Gas Diffusion Electrode Reaction Layer for the Oxygen Reduction Reaction [Volume 10, Issue 2, 2023, Pages 97-109]

M

  • Madram, Ali Reza Effect of temperature on kinetics of the hydrogen evolution reaction on Ni-P-C cathodes in alkaline solution [Volume 1, Issue 4, 2014, Pages 215-222]
  • Madram, Ali Reza Application of Pd-Substituted Ni-Al Layered Double Hydroxides for the Hydrogen Evolution Reaction [Volume 2, Issue 4, 2015, Pages 253-261]
  • Madram, Ali Reza In situ activation of a Ni catalyst with Mo ion for hydrogen evolution reaction in alkaline solution [Volume 3, Issue 2, 2016, Pages 151-158]
  • Madram, Ali Reza A high performance lithium-ion battery using LiNa0.02K0.01FePO4/C as cathode material and anatase TiO2 nanotube arrays as anode material [Volume 4, Issue 1, 2017, Pages 27-35]
  • Madram, Ali Reza Preparation of Ni-P-CeO2 electrode and study on electrocatalytic properties for hydrogen evolution reaction [Volume 5, Issue 1, 2018, Pages 1-11]
  • Madram, Ali Reza Kinetics study of hydrogen evolution reaction on a high porous three dimensional NiPC alloy [Volume 8, Issue 2, 2021, Pages 95-101]
  • Mahmood, Faizal Theoretical study of the effect of hydrogen addition to natural gas-fueled direct-injection engines [Volume 1, Issue 1, 2014, Pages 11-20]
  • Mahmoodi, Farshid Transient Three-dimensional Simulation of a Metal Hydride Hydrogen Storage Tank Interconnected to a PEM Fuel Cell by Heat Pipes [Volume 6, Issue 2, 2019, Pages 117-132]
  • Mahmoudi, Mehrdad Thermodynamic investigation of applying a thermoelectric generator to produce hydrogen in a multigeneration system [Volume 10, Issue 2, 2023, Pages 131-145]
  • Mahmoudi Najafi, Seyed Heydar Highly Ordered Nanoporous β-Ni(OH)2 Nanobelt Array Architectures as Electrode Material for Electrochemical Capacitors: Design, Synthesis, Characterization and Supercapacitive Evaluation [Volume 10, Issue 2, 2023, Pages 157-171]
  • Majidi Beiragh, Masoud Nanostructured Palladium-Doped Silica Membrane Layer Synthesis for Hydrogen Separation: Effect of Activated Sublayers [Volume 6, Issue 1, 2019, Pages 1-9]
  • Malek Khachatourian, Adrine Synthesis and characterization of Ag-Y co-doped Mn-Co spinel for solid oxide fuel cell application [Volume 8, Issue 1, 2021, Pages 43-49]
  • Malek Khachatourian, Adrine Synthesis and electrochemical properties of Sr3Fe1.8Co0.2O7 as a solid oxide fuel cell cathode [Volume 8, Issue 1, 2021, Pages 51-58]
  • Mansouri, Seyed Hossein The Impact of Wettability on Effective Properties of Cathode Catalyst Layer in a Proton Exchange Membrane Fuel Cell [Volume 3, Issue 3, 2016, Pages 233-245]
  • Marashi, Pirooz The effect of copper infiltration on LSM Cathode microstructure in high temperature solid oxide fuel cells [Volume 10, Issue 4, 2023, Pages 281-290]
  • Mardanpour, Mohammad Mahdi Modeling of Multi-population Microbial Fuel and Electrolysis Cells Based on the Bioanode Potential Conditions [Volume 1, Issue 4, 2014, Pages 247-260]
  • Mardanpour, Mohammad Mahdi A comparative study of three types of anode electrodes in a microfluidic microbial fuel cell [Volume 8, Issue 1, 2021, Pages 13-21]
  • Maroufi, Arman Performance Analysis and Working Fluids Selection of Organic Rankine Cycle in a Triple Power Generation System Combined with Gas Turbine and Solid Oxide Fuel Cell Cycles [Volume 10, Issue 1, 2023, Pages 11-32]
  • Masrori Saadat, Seyed Hossein Electrochemical Impedance Spectroscopy for Investigation of Different Losses in 4-cells Short Stack with Integrated Humidifier and Water Separator [Volume 3, Issue 2, 2016, Pages 127-136]
  • Masrori Saadat, Seyed Hossein Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization [Volume 3, Issue 3, 2016, Pages 183-197]
  • Mazloum-Ardakani, Mohammad Facile hydrothermal synthesis and electrochemical investigation of a free-standing cobalt oxide hierarchical nanostructure electrode on a porous carbon structure as an efficient supercapacitor [Volume 11, Issue 2, 2024, Pages 123-130]
  • MEHRABIAN, Mozafar ali Modeling heat and mass transfer in laminar forced flow between parallel plates channel imposed to suction or injection [Volume 2, Issue 1, 2015, Pages 35-46]
  • Mehrabinejad, Kolsoom Evaluation of electrocatalytic performance of PtCo/C nanoparticles in different proportions of cobalt for oxygen reduction reaction [Volume 10, Issue 4, 2023, Pages 291-297]
  • Mehranjani, Alireza Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]
  • Meshkani, Fereshteh Investigation of the catalytic performance and coke formation of nanocrystalline Ni/SrO-Al2O3 catalyst in dry reforming of methane [Volume 3, Issue 4, 2016, Pages 315-322]
  • Mirtalaei, Sayyed Mohammad Mehdi Small signal stability analysis and frequency control in a single-area multi-source electrical energy system [Volume 11, Issue 2, 2024, Pages 107-116]
  • Mirzaee, Iraj Thermodynamic evaluation of a novel geothermal and solar-driven multigeneration system for hydrogen and freshwater production [Volume 10, Issue 1, 2023, Pages 51-67]
  • Mirzaee, Iraj Thermodynamic investigation of applying a thermoelectric generator to produce hydrogen in a multigeneration system [Volume 10, Issue 2, 2023, Pages 131-145]
  • Moayeri, Mona Morphological and physical study of Cu-Ni sintered porous wicks used in heat pipes and fuel cells [Volume 3, Issue 4, 2016, Pages 255-266]
  • Moazemi Goudarzi, Ali Mechanical behavior of metal hydrides and hydrogen storage containers: A review [Volume 10, Issue 3, 2023, Pages 257-278]
  • Mohammad Ebrahimi, Iman Three-dimensional modeling of transport phenomena in a planar anode-supported solid oxide fuel cell [Volume 4, Issue 1, 2017, Pages 37-52]
  • Mohammadi, Kamal Developed endplate geometry for uniform contact pressure distribution over PEMFC active area [Volume 7, Issue 1, 2020, Pages 1-12]
  • Mohammadi, Kamal Mechanical and chemical characteristics of the PEM fuel cell sealants in simulated environment [Volume 9, Issue 2, 2022, Pages 163-178]
  • Mohammadi*, mohammad Mahdi Experimental study and numerical modeling of vibrational characteristics of a 500W PEM fuel cell stack [Volume 9, Issue 1, 2022, Pages 39-52]
  • Mohammadi-Ahmar, akbar Numerical analysis of reactant transport in the novel tubular polymer electrolyte membrane fuel cells [Volume 2, Issue 3, 2015, Pages 181-196]
  • Mohammadpoor, H Sulfurous Analysis of Bioelectricity Generation from Sulfate-reducing Bacteria (SRB) in a Microbial Fuel Cell [Volume 4, Issue 4, 2017, Pages 307-321]
  • Mohammadpour Mir, Amirhossein Fuel Cell Power System Conceptual Design for Unmanned Underwater Vehicle [Volume 10, Issue 1, 2023, Pages 33-50]
  • Mohammadzadeh, Vahid Comparison of waste heat recovery from a Proton Exchange Membrane fuel cell by gas turbine or Organic Rankin Cycle: a display of 3E analysis [Volume 8, Issue 2, 2021, Pages 103-112]
  • Mohammed Qasim, Hayder Analysis and implementation of high step-up SEPIC converter without coupled inductor for high voltage applications [Volume 10, Issue 3, 2023, Pages 201-213]
  • Mohebbi, Mehdi Preparation of Ni-P-CeO2 electrode and study on electrocatalytic properties for hydrogen evolution reaction [Volume 5, Issue 1, 2018, Pages 1-11]
  • Mohebbi-Kalhori, Davood Numerical investigation of methanol crossover through the membrane in a direct methanol fuel cell [Volume 5, Issue 1, 2018, Pages 21-33]
  • Mohebi, Hamed Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]
  • Molaahmad, Abolfazl Synthesis and characterization of nanostructured Cux (Mn1.5-x/2Co1.5-x/2)O4 as an interconnect coating for solid oxide fuel cell [Volume 8, Issue 1, 2021, Pages 35-41]
  • Momenifar, Mohammad Developed endplate geometry for uniform contact pressure distribution over PEMFC active area [Volume 7, Issue 1, 2020, Pages 1-12]
  • Momenifar, Mohammad Mechanical and chemical characteristics of the PEM fuel cell sealants in simulated environment [Volume 9, Issue 2, 2022, Pages 163-178]
  • Momenifar, Mohammad Study of Contact Pressure Distribution over MEA of the Three-Cell PEMFC with Metallic Bipolar Plates [Volume 10, Issue 1, 2023, Pages 69-79]
  • Mongashti, Zahra Lithium-oxygen charge transfer interaction: a deformation density analysis study [Volume 11, Issue 2, 2024, Pages 117-122]
  • Moosazadeh, hamid Experimental study and numerical modeling of vibrational characteristics of a 500W PEM fuel cell stack [Volume 9, Issue 1, 2022, Pages 39-52]
  • Moradian, Mohammadreza A sensorless adaptive non-linear control scheme for minimizing the stator energy losses of IPMSM [Volume 11, Issue 2, 2024, Pages 131-141]
  • Morshedsolouk, Fattaneh Mechanical behavior of metal hydrides and hydrogen storage containers: A review [Volume 10, Issue 3, 2023, Pages 257-278]
  • Mostafaeipour, Ali Generating electricity using pico hydro-based power plant in Koohrang county, Iran: effect of energy storage type [Volume 11, Issue 1, 2024, Pages 19-38]
  • Mostafavi, Ebrahim La0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study [Volume 1, Issue 4, 2014, Pages 239-246]
  • Mozaffari, Sayed Ahmad Synthesis of Supported Pt Alloy three Dimensional Rhombus Shapes Nanoparticles for Oxygen Reduction Reaction [Volume 2, Issue 2, 2015, Pages 121-130]
  • Mozaffari, Sayed Ahmad Highly Ordered Nanoporous β-Ni(OH)2 Nanobelt Array Architectures as Electrode Material for Electrochemical Capacitors: Design, Synthesis, Characterization and Supercapacitive Evaluation [Volume 10, Issue 2, 2023, Pages 157-171]
  • Murthy, T. Sreenivasa Thermoexergetic analysis of common rail direct injection diesel engine on optimized multiple injection strategy of performance and emission using congress grass tamarind shell co-pyrolysis oil blend and diesel [Volume 11, Issue 2, 2024, Pages 78-94]

N

  • Najafpour, Ghasem Effect of batch vs. continuous mode of operation on microbial desalination cell performance treating municipal wastewater [Volume 3, Issue 4, 2016, Pages 281-290]
  • Najar-Khodabakhsh, Abbas A sensorless adaptive non-linear control scheme for minimizing the stator energy losses of IPMSM [Volume 11, Issue 2, 2024, Pages 131-141]
  • Naji, Leila Electrochemical Study of Hydrogen Adsorption/Reduction (HAR) Reaction on Graphene Oxide as Electrocatalyst for Proton Exchange Membrane Fuel Cells [Volume 2, Issue 2, 2015, Pages 99-107]
  • Nasiri, Mohammad The effect of solvent of titanium precursor in the sol-gel process on the activity of TiO2 nanoparticles for H2 production [Volume 4, Issue 2, 2017, Pages 139-151]
  • Nasiri, Mohammad Preparation of Ni-P-CeO2 electrode and study on electrocatalytic properties for hydrogen evolution reaction [Volume 5, Issue 1, 2018, Pages 1-11]
  • Nassernejad, Bahram Kinetic study of CO desorption from cathodic electrochemically treated carbon paper supported Pt electrodes [Volume 4, Issue 3, 2017, Pages 201-207]
  • Nemati, Ali Synthesis and electrochemical properties of Sr3Fe1.8Co0.2O7 as a solid oxide fuel cell cathode [Volume 8, Issue 1, 2021, Pages 51-58]
  • Norouzi, Nima Exergy and Energy Analysis of Effective Utilization of Carbon Dioxide in the Gas-to-Methanol Process [Volume 7, Issue 1, 2020, Pages 13-31]
  • Norouzi, Zahra Highly Ordered Nanoporous β-Ni(OH)2 Nanobelt Array Architectures as Electrode Material for Electrochemical Capacitors: Design, Synthesis, Characterization and Supercapacitive Evaluation [Volume 10, Issue 2, 2023, Pages 157-171]
  • Nourouzi, Salman Investigation and optimization of a PEM fuel cell’s electrical and mechanical behavior [Volume 3, Issue 1, 2016, Pages 1-10]
  • Nourouzi, Salman Finite Element Simulation and ANFIS Prediction of Dimensional Error Effect on distribution of BPP/GDL Contact Pressure in PEM Fuel Cell [Volume 4, Issue 2, 2017, Pages 125-138]
  • Nozad Golikand, Ahmad Single walled carbon nanotube in the reaction layer of gas diffusion electrode for oxygen reduction reaction [Volume 1, Issue 2, 2014, Pages 75-82]

O

  • Olyaee, Saeed Modeling of measurement error in refractive index determination of fuel cell using neural network and genetic algorithm [Volume 1, Issue 2, 2014, Pages 95-104]
  • Omidbakhsh Amiri, Elham Reforming Integrated with Oxidation in Micro-Heat Exchanger Reactor with Circular Micro-Channels [Volume 1, Issue 2, 2014, Pages 65-74]
  • Omidbakhsh Amiri, Elham Steam Reforming Integrated with Oxidation of Methanol in a Micro-Channel Reactor with Different Micro-Baffle Shapes [Volume 2, Issue 2, 2015, Pages 75-83]
  • Omidifar, Mina Modeling and simulation of the fluid dynamic and performance of the Pd-based membrane by CFD for hydrogen separation [Volume 9, Issue 1, 2022, Pages 19-25]
  • Ommi, Fathollah Investigation of vessels pressure effect on PEM electrolyzer performance by using a new OneDimensional Dynamic Model [Volume 2, Issue 4, 2015, Pages 271-281]
  • Ommi, Fathollah Comparison of waste heat recovery from a Proton Exchange Membrane fuel cell by gas turbine or Organic Rankin Cycle: a display of 3E analysis [Volume 8, Issue 2, 2021, Pages 103-112]
  • Ozgoli, Hassan Ali Energy Price Analysis of a Biomass Gasification-Solid Oxide Fuel Cell-Gas Turbine Power Plant [Volume 3, Issue 1, 2016, Pages 45-58]
  • Ozgoli, Hassan Ali Exergy Analysis of a Molten Carbonate Fuel Cell-Turbo Expander-Steam Turbine Hybrid Cycle [Volume 3, Issue 4, 2016, Pages 267-279]
  • Ozgoli, Hassan Ali Integration of a Vanadium Redox Flow Battery with a Proton Exchange Membrane Fuel Cell as an Energy Storage System [Volume 4, Issue 1, 2017, Pages 53-68]
  • Ozgoli, Hassan Ali Simulation of a Solid Oxide Fuel Cell with External Steam Methane Reforming and Bypass [Volume 4, Issue 2, 2017, Pages 103-118]

P

  • Pahnabi, Amirhossein High Step-Up Converter with Low Voltage Stress for Fuel Cell Applications [Volume 9, Issue 2, 2022, Pages 117-132]
  • Pahnabi, Amirhossein Experimental Investigation of a High Efficiency Power Path Controller for PEM Fuel Cell and Battery Hybrid System [Volume 9, Issue 2, 2022, Pages 149-161]
  • Parnian, Mohammad Javad Preparation of Nitrogen-Doped Graphene By Solvothermal Process as Supporting Material for Fuel Cell Catalysts [Volume 1, Issue 2, 2014, Pages 113-119]
  • Parnian, Mohammad Javad Multi-walled carbon nanotubes supported palladium nanoparticles: Synthesis, characterization and catalytic activity towards methanol electro oxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 67-74]
  • Parnian, Mohammad Javad Studies on the SPEEK membrane with low degree of sulfonation as a stable proton exchange membrane for fuel cell applications [Volume 3, Issue 3, 2016, Pages 221-232]
  • Pashaie, Pouya Finite Element Simulation and ANFIS Prediction of Dimensional Error Effect on distribution of BPP/GDL Contact Pressure in PEM Fuel Cell [Volume 4, Issue 2, 2017, Pages 125-138]
  • Paydar, Mohammad Hossein Synthesis and investigation on microstructure and electrical conductivity of Ruddlesden-Popper phase, La1.9Sr0.1Ni0.7Cu0.3O4 (LSNC), as cathode material for intermediate temperature solid oxide fuel cells [Volume 8, Issue 2, 2021, Pages 69-76]
  • Paydar, Sara Synthesis and investigation on microstructure and electrical conductivity of Ruddlesden-Popper phase, La1.9Sr0.1Ni0.7Cu0.3O4 (LSNC), as cathode material for intermediate temperature solid oxide fuel cells [Volume 8, Issue 2, 2021, Pages 69-76]
  • Penhani, Hossein Performance Analysis and Working Fluids Selection of Organic Rankine Cycle in a Triple Power Generation System Combined with Gas Turbine and Solid Oxide Fuel Cell Cycles [Volume 10, Issue 1, 2023, Pages 11-32]
  • Pirkandi, Jamasb Performance Analysis and Working Fluids Selection of Organic Rankine Cycle in a Triple Power Generation System Combined with Gas Turbine and Solid Oxide Fuel Cell Cycles [Volume 10, Issue 1, 2023, Pages 11-32]
  • Pishvaie, mahmoud reza New Mathematical Modelling and Dynamic Simulation of a Molten Carbonate Fuel Cell [Volume 2, Issue 4, 2015, Pages 241-252]
  • Poorshakoor, Ehsan Optimum calcination temperature for the synthesis of nanostructured alumina for energy storage heat management applications [Volume 11, Issue 1, 2024, Pages 8-18]
  • Porhemmat, Zahra Mechanistic approach developed to estimation of exchange current density and charge transfer coefficient in lead acid batteries [Volume 11, Issue 1, 2024, Pages 68-77]
  • Pourarian, Faiz "Physical properties and electronic structure of LaNi5 compound before and after hydrogenation: An experimental and theoretical approach" [Volume 1, Issue 1, 2014, Pages 27-39]
  • Pourarian, Faiz Synthesis, characterization and hydrogen storage properties of Mm(Ni,Co,Mn,Al)5 alloy [Volume 1, Issue 2, 2014, Pages 83-94]
  • Pourarian, Faiz Density Functional Studies on Crystal Structure and electronic properties of Potassium Alanate as a candidate for Hydrogen storage [Volume 2, Issue 3, 2015, Pages 169-179]
  • Pouretedal, Hamid Reza Effect of temperature on kinetics of the hydrogen evolution reaction on Ni-P-C cathodes in alkaline solution [Volume 1, Issue 4, 2014, Pages 215-222]
  • Pouretedal, Hamid Reza The effect of solvent of titanium precursor in the sol-gel process on the activity of TiO2 nanoparticles for H2 production [Volume 4, Issue 2, 2017, Pages 139-151]
  • Pourmahmoud, Nader The simulation of novel annular shape on the Performance in Proton Exchange Membrane Fuel Cell [Volume 1, Issue 3, 2014, Pages 175-188]
  • Pourmahmoud, Nader Modeling and simulation of a new architecure stack applied on the PEM Fuel Cell [Volume 3, Issue 2, 2016, Pages 99-112]
  • Prasad, B. Durga Thermoexergetic analysis of common rail direct injection diesel engine on optimized multiple injection strategy of performance and emission using congress grass tamarind shell co-pyrolysis oil blend and diesel [Volume 11, Issue 2, 2024, Pages 78-94]

R

  • Raeisi, Heidar Ali Generating electricity using pico hydro-based power plant in Koohrang county, Iran: effect of energy storage type [Volume 11, Issue 1, 2024, Pages 19-38]
  • Rafia, Nesa Nanostructured Palladium-Doped Silica Membrane Layer Synthesis for Hydrogen Separation: Effect of Activated Sublayers [Volume 6, Issue 1, 2019, Pages 1-9]
  • Rahgoshay, Majid Experimental Study of Oxidant Effect on Lifetime of PEM Fuel Cell [Volume 7, Issue 1, 2020, Pages 33-43]
  • Rahgoshay, Majid Design and Analysis of an Innovative Dead-end Cascade-type PEMFC Stack at Different Orientations [Volume 7, Issue 1, 2020, Pages 81-96]
  • Rahgoshay, Majid Quantitative study of water level control system in PEM fuel cell separator for conservation of reactant gases [Volume 8, Issue 1, 2021, Pages 1-12]
  • Rahgoshay, Seyed Majid Electrochemical Impedance Spectroscopy for Investigation of Different Losses in 4-cells Short Stack with Integrated Humidifier and Water Separator [Volume 3, Issue 2, 2016, Pages 127-136]
  • Rahgoshay, Seyed Majid Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization [Volume 3, Issue 3, 2016, Pages 183-197]
  • Rahimi, Masood Sulfurous Analysis of Bioelectricity Generation from Sulfate-reducing Bacteria (SRB) in a Microbial Fuel Cell [Volume 4, Issue 4, 2017, Pages 307-321]
  • Rahimi, Rahbar Numerical investigation of methanol crossover through the membrane in a direct methanol fuel cell [Volume 5, Issue 1, 2018, Pages 21-33]
  • Rahimi, Rahbar Transient Three-dimensional Simulation of a Metal Hydride Hydrogen Storage Tank Interconnected to a PEM Fuel Cell by Heat Pipes [Volume 6, Issue 2, 2019, Pages 117-132]
  • Rahimi-Ahar, Zohreh Numerical study on the performance prediction of a proton exchange membrane (PEM) fuel cell [Volume 4, Issue 4, 2017, Pages 249-263]
  • Rahimi-Esbo, Mazaher Electrochemical Impedance Spectroscopy for Investigation of Different Losses in 4-cells Short Stack with Integrated Humidifier and Water Separator [Volume 3, Issue 2, 2016, Pages 127-136]
  • Rahimi-Esbo, Mazaher Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization [Volume 3, Issue 3, 2016, Pages 183-197]
  • Rahimi-Esbo, Mazaher Experimental Study of Oxidant Effect on Lifetime of PEM Fuel Cell [Volume 7, Issue 1, 2020, Pages 33-43]
  • Rahimi-Esbo, Mazaher Design and Analysis of an Innovative Dead-end Cascade-type PEMFC Stack at Different Orientations [Volume 7, Issue 1, 2020, Pages 81-96]
  • Rahimi-Esbo, Mazaher Quantitative study of water level control system in PEM fuel cell separator for conservation of reactant gases [Volume 8, Issue 1, 2021, Pages 1-12]
  • Rahimi-Esbo, Mazaher Simulation of integrated purification systems for hydrogen production in methanol steam reforming process [Volume 10, Issue 3, 2023, Pages 158-199]
  • Rahimi-Esbo, Mazaher Assessment of a novel photovoltaic-electrolyzer-fuel cell-ORC hybrid energy system for hydrogen and power production [Volume 10, Issue 2, 2023, Pages 111-130]
  • Rahimi-Esbo, Mazaher New criterion for achieving efficient flow fields in PEM fuel cells [Volume 11, Issue 1, 2024, Pages 46-67]
  • Rahimi Takami, Mehdi Lattice Boltzmann Modeling of Methane Steam Reforming Reactions in Solid Oxide Fuel Cells [Volume 7, Issue 1, 2020, Pages 61-79]
  • Rahmani, Soudabeh A comparative study on the kinetics of carbon dioxide methanation over bimetallic and monometallic catalysts [Volume 3, Issue 1, 2016, Pages 59-71]
  • Rahmanian, Alireza Electrochemical Study of Hydrogen Adsorption/Reduction (HAR) Reaction on Graphene Oxide as Electrocatalyst for Proton Exchange Membrane Fuel Cells [Volume 2, Issue 2, 2015, Pages 99-107]
  • Rajabinasab, Morteza Effect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system [Volume 3, Issue 4, 2016, Pages 301-313]
  • Ramin, Farzin The effect of inclined radial flow in proton exchange membrane fuel cells performance [Volume 1, Issue 3, 2014, Pages 141-152]
  • Ramin, Farzin The effect of vertical injection of reactants to the membrane electrode assembly on the performance of a PEM fuel cell [Volume 3, Issue 3, 2016, Pages 167-182]
  • Ramin, Farzin The effect of increasing the multiplicity of flow fields contact surface on the performance of PEM fuel cell [Volume 4, Issue 1, 2017, Pages 69-83]
  • Ranjbar, Maryam Preparation, characterization and the study of electrochemical behavior of Y-doped Bariumcerate powders by new precursors [Volume 10, Issue 1, 2023, Pages 1-10]
  • Ranjbar, Maryam Nickel oxide-gadolinium doped ceria synthesized by new methods as anodes material for solid oxide fuel cells [Volume 9, Issue 2, 2022, Pages 133-147]
  • Ranjbar, Mehdi Hydrogen sensing by localized surface plasmon resonance in colloidal solutions of Au-WO3-Pd [Volume 4, Issue 2, 2017, Pages 119-124]
  • Raoof, Amir The Impact of Wettability on Effective Properties of Cathode Catalyst Layer in a Proton Exchange Membrane Fuel Cell [Volume 3, Issue 3, 2016, Pages 233-245]
  • Rashidi, Alimorad Facile Synthesis of N, S-Doped Graphene from Sulfur Trioxide Pyridine Precursor for the Oxygen Reduction Reaction [Volume 4, Issue 3, 2017, Pages 231-240]
  • Rastegari-fard, Freshteh Oxygen reduction reaction on Pt/C at the presence of super paramagnetic of Fe3O4 nanoparticles for PEMFCs [Volume 1, Issue 1, 2014, Pages 41-46]
  • Rezaei, Mehran Effect of K2O on the catalytic performance of Ni catalysts supported on nanocrystalline Al2O3 in CO2 reforming of methane [Volume 2, Issue 4, 2015, Pages 215-226]
  • Rezaei, Mehran A comparative study on the kinetics of carbon dioxide methanation over bimetallic and monometallic catalysts [Volume 3, Issue 1, 2016, Pages 59-71]
  • Rezaei, Mehran Investigation of the catalytic performance and coke formation of nanocrystalline Ni/SrO-Al2O3 catalyst in dry reforming of methane [Volume 3, Issue 4, 2016, Pages 315-322]
  • Rezaei Firozjaee, Mohammad Experimental Investigation of a High Efficiency Power Path Controller for PEM Fuel Cell and Battery Hybrid System [Volume 9, Issue 2, 2022, Pages 149-161]
  • Rezaei Firozjaee, Mohammad Fuel Cell Power System Conceptual Design for Unmanned Underwater Vehicle [Volume 10, Issue 1, 2023, Pages 33-50]
  • Rezaei Firozjaee, Mohammad Assessment of a novel photovoltaic-electrolyzer-fuel cell-ORC hybrid energy system for hydrogen and power production [Volume 10, Issue 2, 2023, Pages 111-130]
  • Riazat, Mohammad A new approach to microstructure optimization of solid oxide fuel cell electrodes [Volume 4, Issue 2, 2017, Pages 93-102]
  • Rowshanzamir, Soosan Preparation of Nitrogen-Doped Graphene By Solvothermal Process as Supporting Material for Fuel Cell Catalysts [Volume 1, Issue 2, 2014, Pages 113-119]
  • Rowshanzamir, Soosan Hydrothermal synthesis of nano-size zirconia using commercial zirconia powder: process optimization through response surface methodology [Volume 1, Issue 3, 2014, Pages 163-173]
  • Rowshanzamir, Soosan Multi-walled carbon nanotubes supported palladium nanoparticles: Synthesis, characterization and catalytic activity towards methanol electro oxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 67-74]
  • Rowshanzamir, Soosan Investigation of ion transport and water content properties in anion exchange membranes based on polysulfone for solid alkaline fuel cell application [Volume 2, Issue 1, 2015, Pages 13-25]
  • Rowshanzamir, Soosan Studies on the SPEEK membrane with low degree of sulfonation as a stable proton exchange membrane for fuel cell applications [Volume 3, Issue 3, 2016, Pages 221-232]
  • Rowshanzamir, Soosan Dynamic investigation of hydrocarbon proton exchange membrane Fuel Cell [Volume 4, Issue 3, 2017, Pages 219-230]

S

  • SAADAOUI, Farid Development and Simulation of a PEM Fuel Cell model for Prediction of Water Content and Power Generation [Volume 4, Issue 4, 2017, Pages 289-299]
  • Saadatinasab, Mohammad Determination of thermodynamic parameters of hydrogen permeation of palladium membrane for considering the effect of stainless steel support [Volume 1, Issue 1, 2014, Pages 1-10]
  • Saberimoghaddam, Ali How to Design a Cryogenic Joule-Thomson Cooling System: Case Study of Small Hydrogen Liquefier [Volume 3, Issue 2, 2016, Pages 113-125]
  • Saberimoghaddam, Ali Influence of unsuitable operational conditions on the transient performance of a small hydrogen liquefier [Volume 3, Issue 3, 2016, Pages 199-212]
  • Saberimoghaddam, Ali Investigation of carbon dioxide capture from hydrogen using the thermal pressure swing adsorption process: Central composite design modeling [Volume 4, Issue 1, 2017, Pages 13-26]
  • Saberimoghaddam*, Ali Performance verification of a laboratory scale hydrogen/oxygen combustion chamber [Volume 9, Issue 1, 2022, Pages 27-38]
  • Saboohi, Zoheir Comparison of waste heat recovery from a Proton Exchange Membrane fuel cell by gas turbine or Organic Rankin Cycle: a display of 3E analysis [Volume 8, Issue 2, 2021, Pages 103-112]
  • Sadeghi, Davood Morphological and physical study of Cu-Ni sintered porous wicks used in heat pipes and fuel cells [Volume 3, Issue 4, 2016, Pages 255-266]
  • Sadeghi, Saber Effect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system [Volume 3, Issue 4, 2016, Pages 301-313]
  • Sadeghian, Zahra The effect of copper infiltration on LSM Cathode microstructure in high temperature solid oxide fuel cells [Volume 10, Issue 4, 2023, Pages 281-290]
  • Sadrameli, Seyed Mojtaba Sulfurous Analysis of Bioelectricity Generation from Sulfate-reducing Bacteria (SRB) in a Microbial Fuel Cell [Volume 4, Issue 4, 2017, Pages 307-321]
  • Saeedi, Ali Impact of Product Gas Recycling on Steam Methane Reforming Performance with Ni and Rh Catalysts [(Articles in Press)]
  • Safavenejad, Ali Performance assessment of a SOFC cogeneration system for residential buildings located in eastern Iran [Volume 3, Issue 2, 2016, Pages 81-97]
  • Sahebi Joibari, Iman Experimental Analysis of Fiber Laminating Effects on Flexural Rigidity of Composite Endplates for Use in PEM Fuel Cells [Volume 9, Issue 2, 2022, Pages 97-106]
  • Salamati, Hadi Hydrogen sensing by localized surface plasmon resonance in colloidal solutions of Au-WO3-Pd [Volume 4, Issue 2, 2017, Pages 119-124]
  • Salem, Ramzi S. Prospects and challenges for the production and use of green hydrogen as a promising energy in Libya [Volume 11, Issue 1, 2024, Pages 1-7]
  • Samimi, Abdolreza Implementation of Chitosan modified ultrafiltration hollow fiber as proton exchange membrane of ml-scale microbial fuel cells [Volume 10, Issue 4, 2023, Pages 299-310]
  • Sang Davini, Hossein Design and Investigation of Honeycomb End Plates for PEM Fuel Cells [Volume 4, Issue 3, 2017, Pages 189-199]
  • Sarhaddi, Reza "Physical properties and electronic structure of LaNi5 compound before and after hydrogenation: An experimental and theoretical approach" [Volume 1, Issue 1, 2014, Pages 27-39]
  • Saydi, Davood Optimization of the preparation procedure of Ni/Al2O3 catalyst for steam reforming of n-butane [Volume 2, Issue 3, 2015, Pages 139-149]
  • Scholta, Joachim Generalization of a CFD Model to Predict the Net Power in PEM Fuel Cells [Volume 6, Issue 1, 2019, Pages 23-37]
  • Seddighi, Shahaboddin Numerical-experimental study on the thickness distribution of metallic bipolar plates for PEM fuel cells [Volume 9, Issue 1, 2022, Pages 1-18]
  • Seddighi, Shahaboddin Study of the forming process effects on the wrinkling and thinning percentage of the micro-channels with serpentine layout [Volume 10, Issue 1, 2023, Pages 81-93]
  • Sedighi, Majid A review of the main mechanisms of catalyst layer degradation in polymer electrolyte membrane fuel cell (PEMFC) and different performance recovery methods [Volume 6, Issue 2, 2019, Pages 91-115]
  • Sedighi, Majid Simulation of integrated purification systems for hydrogen production in methanol steam reforming process [Volume 10, Issue 3, 2023, Pages 158-199]
  • Shahgholian, Ghazanfar Comparison and Analysis of Dynamic Behavior of Load Frequency Control in Power System with Steam, Hydro and Gas Power Plants [Volume 10, Issue 4, 2023, Pages 311-325]
  • Shahgholian, Ghazanfar Small signal stability analysis and frequency control in a single-area multi-source electrical energy system [Volume 11, Issue 2, 2024, Pages 107-116]
  • Shakeri, Mohsen Investigation and optimization of a PEM fuel cell’s electrical and mechanical behavior [Volume 3, Issue 1, 2016, Pages 1-10]
  • Shakeri, Mohsen A new approach to microstructure optimization of solid oxide fuel cell electrodes [Volume 4, Issue 2, 2017, Pages 93-102]
  • Shakeri, Mohsen Finite Element Simulation and ANFIS Prediction of Dimensional Error Effect on distribution of BPP/GDL Contact Pressure in PEM Fuel Cell [Volume 4, Issue 2, 2017, Pages 125-138]
  • Shakouri Kalfati, Milad Dynamic investigation of hydrocarbon proton exchange membrane Fuel Cell [Volume 4, Issue 3, 2017, Pages 219-230]
  • Sharifi, Shima Numerical investigation of methanol crossover through the membrane in a direct methanol fuel cell [Volume 5, Issue 1, 2018, Pages 21-33]
  • Shateri, Majid Energy Management Simulation in a PEM Fuel Cell System [Volume 2, Issue 1, 2015, Pages 1-6]
  • Shirani-Faradonbeh, Hasan Synthesis and investigation on microstructure and electrical conductivity of Ruddlesden-Popper phase, La1.9Sr0.1Ni0.7Cu0.3O4 (LSNC), as cathode material for intermediate temperature solid oxide fuel cells [Volume 8, Issue 2, 2021, Pages 69-76]
  • Shirvani, Hassan Thermodynamic evaluation of a novel geothermal and solar-driven multigeneration system for hydrogen and freshwater production [Volume 10, Issue 1, 2023, Pages 51-67]
  • Simayi, Yibadatihan The significance of key operational variables to the enhancement of hydrogen production in a single-chamber microbial electrolysis cell (MEC) [Volume 2, Issue 2, 2015, Pages 85-97]
  • Solaimany Nazar, Ali Reza Numerical study on the performance prediction of a proton exchange membrane (PEM) fuel cell [Volume 4, Issue 4, 2017, Pages 249-263]
  • Soltani, Jafar A sensorless adaptive non-linear control scheme for minimizing the stator energy losses of IPMSM [Volume 11, Issue 2, 2024, Pages 131-141]
  • Sovizi, Mohammad Reza A high performance lithium-ion battery using LiNa0.02K0.01FePO4/C as cathode material and anatase TiO2 nanotube arrays as anode material [Volume 4, Issue 1, 2017, Pages 27-35]
  • Sovizi, Mohammad Reza Preparation of Ni-P-CeO2 electrode and study on electrocatalytic properties for hydrogen evolution reaction [Volume 5, Issue 1, 2018, Pages 1-11]
  • Steinberger-Wilckens, Robert Numerical Investigation of a Hydrogen-fuelled Planar AP-SOFC Performance with Special Focus on Safe Operation [Volume 8, Issue 2, 2021, Pages 113-125]

T

  • Tafazoli, Mehdi A new approach to microstructure optimization of solid oxide fuel cell electrodes [Volume 4, Issue 2, 2017, Pages 93-102]
  • Taghizadeh, Majid Hydrogen production by steam reforming of dimethyle ether over Cu/ZnO/Al2O3 and H-ZSM-5 catalysts: An experimental and modeling study [Volume 1, Issue 3, 2014, Pages 153-161]
  • Taherinia, Maryam The effect of solvent of titanium precursor in the sol-gel process on the activity of TiO2 nanoparticles for H2 production [Volume 4, Issue 2, 2017, Pages 139-151]
  • Talebi, Saeed Exergy and Energy Analysis of Effective Utilization of Carbon Dioxide in the Gas-to-Methanol Process [Volume 7, Issue 1, 2020, Pages 13-31]
  • Talebi Ghadikolaee, Hossein Study of the forming process effects on the wrinkling and thinning percentage of the micro-channels with serpentine layout [Volume 10, Issue 1, 2023, Pages 81-93]
  • Talebi-Ghadikolaee, Hossein Numerical-experimental study on the thickness distribution of metallic bipolar plates for PEM fuel cells [Volume 9, Issue 1, 2022, Pages 1-18]
  • Tanha, Mostafa Saber Effect of CO in the reformatted fuel on the performance of Polymer Electrolyte Membrane (PEM) fuel cell [Volume 4, Issue 2, 2017, Pages 153-165]
  • Tavakkoli, Mohammad Javad Prediction the hydrogen adsorption isotherm on nickel decorated carbon nanotubes by applying artificial neural network modeling [Volume 8, Issue 2, 2021, Pages 61-68]
  • Torabi, Farschad Extremely Fast Simulation of the Li--Ion Batteries Governing Equations [Volume 10, Issue 4, 2023, Pages 339-353]
  • Torabi, Farschad Mechanistic approach developed to estimation of exchange current density and charge transfer coefficient in lead acid batteries [Volume 11, Issue 1, 2024, Pages 68-77]
  • Torabi, Morteza Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]

V

  • Vaezi, Mohammad Javad Effect of Dehydration Temperature on the H2 Separation Potential of Hydroxy Sodalite Zeolite Membranes [Volume 1, Issue 4, 2014, Pages 209-214]
  • Vaezi, Mohammad Javad Nanostructured Palladium-Doped Silica Membrane Layer Synthesis for Hydrogen Separation: Effect of Activated Sublayers [Volume 6, Issue 1, 2019, Pages 1-9]
  • Vuorinen, Esa Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]

Y

  • Yaghmaei, Soheila Modeling of Multi-population Microbial Fuel and Electrolysis Cells Based on the Bioanode Potential Conditions [Volume 1, Issue 4, 2014, Pages 247-260]
  • Yaghmaei, Soheila A comparative study of three types of anode electrodes in a microfluidic microbial fuel cell [Volume 8, Issue 1, 2021, Pages 13-21]
  • Yaghoubi, Somaye Multi-objective optimization of a combined heat and power (CHP) cycle with a solar collector: energy, exergy and economic point of view [Volume 11, Issue 2, 2024, Pages 95-106]
  • Yahyanezhad Gele, Maede A comparative study of three types of anode electrodes in a microfluidic microbial fuel cell [Volume 8, Issue 1, 2021, Pages 13-21]
  • Yaldagard, Maryam Buckypaper-based catalytic electrode containing graphene nanoplates and ZrO2 nanorod composite to improve PEMFC performance [Volume 5, Issue 1, 2018, Pages 57-69]
  • Yaldagard, Maryam Green in-situ Fabrication of PtW/Poly Ethylen Dioxy Thiophene/Graphene Nanoplates/Gas Diffusion Layer (PtW/ PEDOT /GNP/GDL) Electrode and its Electrocatalytic Property for Direct Methanol Fuel Cells Application [Volume 6, Issue 1, 2019, Pages 39-58]
  • Yaldagard, Maryam Synthesis and electrochemical characterization of Graphene-Polyallylamine Nanocomposites as a New Supports of Pt Catalyst for Direct Methanol Fuel Cell Application [Volume 6, Issue 2, 2019, Pages 141-161]
  • Yaldagard, Maryam Ethanol electro-oxidation on Pt/CNFs-GNPs/GDL electrode for fuel cell application [Volume 9, Issue 1, 2022, Pages 69-85]
  • Yasari, Elham Prediction the hydrogen adsorption isotherm on nickel decorated carbon nanotubes by applying artificial neural network modeling [Volume 8, Issue 2, 2021, Pages 61-68]
  • Yazdani, Hamid Integration of a Vanadium Redox Flow Battery with a Proton Exchange Membrane Fuel Cell as an Energy Storage System [Volume 4, Issue 1, 2017, Pages 53-68]
  • Yazdanshenas, Rahil Single walled carbon nanotube in the reaction layer of gas diffusion electrode for oxygen reduction reaction [Volume 1, Issue 2, 2014, Pages 75-82]
  • Youneszadeh, Reza Experimental Investigation of a High Efficiency Power Path Controller for PEM Fuel Cell and Battery Hybrid System [Volume 9, Issue 2, 2022, Pages 149-161]
  • Youneszadeh, Reza Fuel Cell Power System Conceptual Design for Unmanned Underwater Vehicle [Volume 10, Issue 1, 2023, Pages 33-50]
  • Yousefi, Mohammad Reza Small signal stability analysis and frequency control in a single-area multi-source electrical energy system [Volume 11, Issue 2, 2024, Pages 107-116]
  • Yousefi, Vajihe Implementation of Chitosan modified ultrafiltration hollow fiber as proton exchange membrane of ml-scale microbial fuel cells [Volume 10, Issue 4, 2023, Pages 299-310]

Z

  • Zaherian, AmirAli Optimization of the preparation procedure of Ni/Al2O3 catalyst for steam reforming of n-butane [Volume 2, Issue 3, 2015, Pages 139-149]
  • Zamani, Mohammad Reza Numerical-experimental study on the Failure Behavior of Graphite-Based Composite Bipolar Plate for PEM fuel cells [Volume 9, Issue 2, 2022, Pages 107-116]
  • Zandi Atashbar, Navid Application of Pd-Substituted Ni-Al Layered Double Hydroxides for the Hydrogen Evolution Reaction [Volume 2, Issue 4, 2015, Pages 253-261]
  • Zangooei, Fatemeh Impact of Product Gas Recycling on Steam Methane Reforming Performance with Ni and Rh Catalysts [(Articles in Press)]
  • Zareei, Javad Theoretical study of the effect of hydrogen addition to natural gas-fueled direct-injection engines [Volume 1, Issue 1, 2014, Pages 11-20]
  • Zareii, Mojtaba "Physical properties and electronic structure of LaNi5 compound before and after hydrogenation: An experimental and theoretical approach" [Volume 1, Issue 1, 2014, Pages 27-39]
  • Zare Mehrjardi, Hamid Reza Evaluation of electrocatalytic performance of PtCo/C nanoparticles in different proportions of cobalt for oxygen reduction reaction [Volume 10, Issue 4, 2023, Pages 291-297]
  • Ziaei-Rad, Masoud Parametric study of the influence of cooling channel dimensions on PEM fuel cell thermal performance [Volume 4, Issue 4, 2017, Pages 265-274]
  • Ziarati, mahmoud Hydrogen production via steam reforming of LPG on Ni/Zeolite catalysts [Volume 1, Issue 4, 2014, Pages 233-238]
  • Ziarati, Mahmoud Optimization of the preparation procedure of Ni/Al2O3 catalyst for steam reforming of n-butane [Volume 2, Issue 3, 2015, Pages 139-149]
  • Zirak, Parsa Parametric study of a membrane energy exchanger based on energy, entropy, and exergy analysis for proton exchange membrane fuel cell application [(Articles in Press)]
  • Zolfaghari, Alireza Determination of thermodynamic parameters of hydrogen permeation of palladium membrane for considering the effect of stainless steel support [Volume 1, Issue 1, 2014, Pages 1-10]