Abbasalizadeh, Majid Thermodynamic evaluation of a novel geothermal and solar-driven multigeneration system for hydrogen and freshwater production [Volume 10, Issue 1, 2023, Pages 51-67]
Abbasalizadeh, Majid Thermodynamic investigation of a solar-based multigeneration system using Al2O3-Thermonol VP1 nanofluid [Volume 11, Issue 4, 2024, Pages 237-246]
Abbasalizadeh, Majid Hydrogen production capacity of a system based on geothermal energy and thermoelectric generator [(Articles in Press)]
Abbasalizadeh, Majid 4E analysis of a geothermal-based multigeneration system [(Articles in Press)]
Abbasalizadeh, Majid Energetic and Exergetic Analysis of a Geothermal Energy System for Multigeneration Applications: A Thermodynamic Perspective [Volume 13, Issue 2, 2026, Pages 75-82]
Abbasalizadeh, Majid Thermo-Economic Analysis of a Geothermal-based Multigeneration System Using the Kalina Cycle for Power, Heating, Cooling, Hydrogen and Freshwater Production [Volume 13, Issue 2, 2026, Pages 137-148]
Abdali, Saman Multi-objective optimization of a combined heat and power (CHP) cycle with a solar collector: energy, exergy and economic point of view [Volume 11, Issue 2, 2024, Pages 95-106]
Abdoli, Hamid Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]
Abdollahi, Seyyed Amirreza Exergy-Economic analysis of combined cooling, heat and power system utilizing solar energy and biomass [Volume 11, Issue 4, 2024, Pages 271-284]
Abdollahi, Seyyed Amirreza Proposing a Hydrogen Liquefaction Cycle for Geothermal Energy Storage in an Innovative Multi-Generation System [Volume 12, Issue 1, 2025, Pages 1-8]
Abdollahi, Seyyed Amirreza Investigating Numerically the Impact of Phase Change Materials on Heat Exchangers to Optimize Energy Consumption [Volume 13, Issue 2, 2026, Pages 105-112]
Abduladheem Alqadsi, Wameedh Riyadh A new ZVT interleaved high step-up converter with ripple cancellation for photovoltaic systems [Volume 11, Issue 4, 2024, Pages 225-236]
Abdulameer Khadim Alyasari, Muhammed Energy, exergy and economic analysis of studying a biomass-based multigeneration system for power, heating, hydrogen and freshwater production [(Articles in Press)]
Abdullah, Shahrir Theoretical study of the effect of hydrogen addition to natural gas-fueled direct-injection engines [Volume 1, Issue 1, 2014, Pages 11-20]
Abdullah Mirzaie, Rasol Single walled carbon nanotube in the reaction layer of gas diffusion electrode for oxygen reduction reaction [Volume 1, Issue 2, 2014, Pages 75-82]
Abdullah Mirzaie, Rasol Electrochemical evaluation of electrodeposited platinum on a modified carbon substrate with cobalt, nickel and copper doped zinc oxide for the methanol oxidation reaction [Volume 5, Issue 1, 2018, Pages 49-55]
Abdullah Mirzaie, Rasol Effect of Solution Dielectric Constant on the Preparation of Gas Diffusion Electrode Reaction Layer for the Oxygen Reduction Reaction [Volume 10, Issue 2, 2023, Pages 97-109]
Abedini, Ebrahim The effect of solvent of titanium precursor in the sol-gel process on the activity of TiO2 nanoparticles for H2 production [Volume 4, Issue 2, 2017, Pages 139-151]
Abolfazli Esfahani, Javad An Experimental Investigation on Simultaneous Effects of Oxygen Ratio and Flow-Rate in SOFCs Performance Fueled by a Mixture of Methane and Oxygen [Volume 6, Issue 1, 2019, Pages 11-22]
Adimi, Samira Density Functional Studies on Crystal Structure and electronic properties of Potassium Alanate as a candidate for Hydrogen storage [Volume 2, Issue 3, 2015, Pages 169-179]
Afsham, Neda Kinetic study of CO desorption from cathodic electrochemically treated carbon paper supported Pt electrodes [Volume 4, Issue 3, 2017, Pages 201-207]
Afshar, Niloofar The effect of copper infiltration on LSM Cathode microstructure in high temperature solid oxide fuel cells [Volume 10, Issue 4, 2023, Pages 281-290]
Afshari, Ebrahim Parametric study of the influence of cooling channel dimensions on PEM fuel cell thermal performance [Volume 4, Issue 4, 2017, Pages 265-274]
Afshari, Ebrahim Numerical Analysis of the Effect of Pin Dimensions on the Performance of a Polymer Electrolyte Membrane Fuel Cell Featuring a Honeycomb Pin Flow Field [Volume 13, Issue 1, 2026, Pages 17-30]
Agaebrahimi, Mohammad Reza Performance assessment of a SOFC cogeneration system for residential buildings located in eastern Iran [Volume 3, Issue 2, 2016, Pages 81-97]
Aghaeinejad-Meybodi, Abbas Silica membrane performance for hydrogen separation from methanol steam reforming products: Assessment of different multistage membrane schemes [Volume 6, Issue 1, 2019, Pages 59-70]
Aghajani Delavar, Mojtaba Energy Management Simulation in a PEM Fuel Cell System [Volume 2, Issue 1, 2015, Pages 1-6]
Ahmadi Khatir, Farzad Numerical-experimental study on the thickness distribution of metallic bipolar plates for PEM fuel cells [Volume 9, Issue 1, 2022, Pages 1-18]
Ajamein, Hossein Effect of Sorbitol/Oxidizer Ratio on Microwave Assisted Solution Combustion Synthesis of Copper Based Nanocatalyst for Fuel Cell Grade Hydrogen Production [Volume 2, Issue 4, 2015, Pages 227-240]
Akbarian, Parisa Metal‐organic framework‐derived Cu@Co4N nanoparticles anchored on N-doped carbon nanotubes for efficient and stable ORR activity [Volume 10, Issue 4, 2023, Pages 327-337]
Akbarian, Parisa Chemical kinetics analysis of a zinc-air fuel cell [Volume 11, Issue 1, 2024, Pages 39-45]
Al-Aayedi, Ahmed Raad Ali Parametric Study of an ORC-EJR Cycle Based on Energy and Exergy Analysis for Power, Heating, Cooling, and Hydrogen Production [Volume 12, Issue 2, 2025, Pages 75-82]
Al-Aayedi, Ahmed Raad Ali Exergy and energy analysis of a combined cooling, heat, hydrogen and power generation system utilizing geothermal energy [(Articles in Press)]
Alaei, G. Facile hydrothermal synthesis and electrochemical investigation of a free-standing cobalt oxide hierarchical nanostructure electrode on a porous carbon structure as an efficient supercapacitor [Volume 11, Issue 2, 2024, Pages 123-130]
Alavi Sadr, Seyyed Mojtaba Synthesis, characterization and hydrogen storage properties of Mm(Ni,Co,Mn,Al)5 alloy [Volume 1, Issue 2, 2014, Pages 83-94]
Aliakbar Golkar, Masoud Hierarchical Control Strategy of Heat and Power for Zero Energy Buildings including Hybrid Fuel Cell/Photovoltaic Power Sources and Plug-in Electric Vehicle [Volume 3, Issue 1, 2016, Pages 33-44]
Alijanpour, Mohammad Energy Management Simulation in a PEM Fuel Cell System [Volume 2, Issue 1, 2015, Pages 1-6]
Alinoori, Amir Hosein Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]
Alipour, Hashem Power Management in Grid-Scale Energy Storage Systems; A Case Study of Trends [Volume 12, Issue 2, 2025, Pages 105-126]
Alipour, Zahra Effect of K2O on the catalytic performance of Ni catalysts supported on nanocrystalline Al2O3 in CO2 reforming of methane [Volume 2, Issue 4, 2015, Pages 215-226]
Alitabar, Hossein Simulation of integrated purification systems for hydrogen production in methanol steam reforming process [Volume 10, Issue 3, 2023, Pages 158-199]
Alizadeh, Ebrahim Electrochemical Impedance Spectroscopy for Investigation of Different Losses in 4-cells Short Stack with Integrated Humidifier and Water Separator [Volume 3, Issue 2, 2016, Pages 127-136]
Alizadeh, Ebrahim Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization [Volume 3, Issue 3, 2016, Pages 183-197]
Alizadeh, Ebrahim Simulation of integrated purification systems for hydrogen production in methanol steam reforming process [Volume 10, Issue 3, 2023, Pages 158-199]
Alizadeh, Ebrahim Assessment of a novel photovoltaic-electrolyzer-fuel cell-ORC hybrid energy system for hydrogen and power production [Volume 10, Issue 2, 2023, Pages 111-130]
Allahyari, Alireza Simulation of a Solid Oxide Fuel Cell with External Steam Methane Reforming and Bypass [Volume 4, Issue 2, 2017, Pages 103-118]
Al-Maliki, Jabbar Qasim Fahad A new ZVT interleaved high step-up converter with ripple cancellation for photovoltaic systems [Volume 11, Issue 4, 2024, Pages 225-236]
Al-Shammari, Ghanim Kadhim Naser Hydrogen production capacity of a system based on geothermal energy and thermoelectric generator [(Articles in Press)]
Al-Shammari, Ghanim Kadhim Naser Energetic and Exergetic Analysis of a Geothermal Energy System for Multigeneration Applications: A Thermodynamic Perspective [Volume 13, Issue 2, 2026, Pages 75-82]
Al-Tabatabaee, Ammar Jalal Abdulrazzaq Energy and Exergy Investigation of a Multigeneration System Based on Solar and Geothermal Energy Sources [Volume 12, Issue 3, 2025, Pages 193-202]
Al-Tabatabaee, Ammar Jalal Abdulrazzaq Thermodynamic Analysis of a Combined Solar and Geothermal Cycle for Hydrogen and Freshwater Production [Volume 12, Issue 4, 2025, Pages 243-252]
Amedi, Hamid RezaNew Mathematical Modelling and Dynamic Simulation of a Molten Carbonate Fuel Cell [Volume 2, Issue 4, 2015, Pages 241-252]
Ameri, Mehran Effect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system [Volume 3, Issue 4, 2016, Pages 301-313]
Ameri, Mehran Thermoeconomic Analysis and Optimization of a Novel Geothermal Energy-Based Multigeneration System for Liquid Hydrogen, Hot Water, Cooling and Power Production [Volume 13, Issue 2, 2026, Pages 149-166]
Amini, Mohammadreza An Improved Zero Current Transition High Step-Up Single-Switch Converter for Fuel Cell Applications [Volume 12, Issue 3, 2025, Pages 217-226]
Amir, Elaheh Investigation of the catalytic performance and coke formation of nanocrystalline Ni/SrO-Al2O3 catalyst in dry reforming of methane [Volume 3, Issue 4, 2016, Pages 315-322]
Amirshaghaghi, Paria Hydrogen production by steam reforming of dimethyle ether over Cu/ZnO/Al2O3 and H-ZSM-5 catalysts: An experimental and modeling study [Volume 1, Issue 3, 2014, Pages 153-161]
Anaraki Firooz, Azam Electrochemical evaluation of electrodeposited platinum on a modified carbon substrate with cobalt, nickel and copper doped zinc oxide for the methanol oxidation reaction [Volume 5, Issue 1, 2018, Pages 49-55]
Arabi, Hadi "Physical properties and electronic structure of LaNi5 compound before and after hydrogenation: An experimental and theoretical approach" [Volume 1, Issue 1, 2014, Pages 27-39]
Arabi, Hadi Synthesis, characterization and hydrogen storage properties of Mm(Ni,Co,Mn,Al)5 alloy [Volume 1, Issue 2, 2014, Pages 83-94]
Arabi, Hadi Density Functional Studies on Crystal Structure and electronic properties of Potassium Alanate as a candidate for Hydrogen storage [Volume 2, Issue 3, 2015, Pages 169-179]
Arabi, Hadi Study the stability of Si, Ge, Fe and Co in the interior surface of metallic carbon nanotube for hydrogen storage [Volume 2, Issue 3, 2015, Pages 197-205]
Ariyanfar, Leyli A Double Pipe Heat Exchanger Design and Optimization for Cooling an Alkaline Fuel Cell System [Volume 1, Issue 4, 2014, Pages 223-231]
Arjomandbigdeli, Tara Synthesis and characterization of Ag-Y co-doped Mn-Co spinel for solid oxide fuel cell application [Volume 8, Issue 1, 2021, Pages 43-49]
Arshad, Muhammad BilalInvestigating the Effects of Operating Parameters on Hydroxy Gas Production through Solar-Powered Alkaline Water Electrolysis: a COMSOL Simulation and Experimental Approach [Volume 12, Issue 1, 2025, Pages 9-18]
Asadi, Samane In situ activation of a Ni catalyst with Mo ion for hydrogen evolution reaction in alkaline solution [Volume 3, Issue 2, 2016, Pages 151-158]
Asadi, Samane Kinetics study of hydrogen evolution reaction on a high porous three dimensional NiPC alloy [Volume 8, Issue 2, 2021, Pages 95-101]
Asghari, Saeed Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]
Ataie, Abolghasem La0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study [Volume 1, Issue 4, 2014, Pages 239-246]
Azami, Sayyed Mohammad Lithium-oxygen charge transfer interaction: a deformation density analysis study [Volume 11, Issue 2, 2024, Pages 117-122]
Azami, Sayyed Mohammad Prediction of Redox Potentials, Electronic Properties, and Spectroscopic Characteristics of Hydrogen Atoms Covalently Bonded to Palladium [Volume 12, Issue 2, 2025, Pages 83-88]
Azari, Khaled Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]
Azarm, Daryoush Future prospects for solar energy production and storage in Iran [Volume 11, Issue 4, 2024, Pages 247-258]
Azizi, Saba Investigation of ion transport and water content properties in anion exchange membranes based on polysulfone for solid alkaline fuel cell application [Volume 2, Issue 1, 2015, Pages 13-25]
B
Babaei, Alireza La0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study [Volume 1, Issue 4, 2014, Pages 239-246]
Babaei, Alireza Nickel oxide-gadolinium doped ceria synthesized by new methods as anodes material for solid oxide fuel cells [Volume 9, Issue 2, 2022, Pages 133-147]
Babalou, Ali Akbar Feasibility of Fabricating a Defect-Free Nickel Composite Membrane Using the Organic-Inorganic Activation Technique [Volume 13, Issue 2, 2026, Pages 113-124]
Babaluo, Ali Akbar Effect of Dehydration Temperature on the H2 Separation Potential of Hydroxy Sodalite Zeolite Membranes [Volume 1, Issue 4, 2014, Pages 209-214]
Babaluo, Ali Akbar Preparation of Pd composite membrane via organic-inorganic activation method in electroless plating technique [Volume 2, Issue 3, 2015, Pages 151-158]
Babaluo, Ali Akbar Palladium composite membrane with high reversibility of CO2 poisoning [Volume 5, Issue 1, 2018, Pages 13-19]
Babaluo, Ali Akbar Nanostructured Palladium-Doped Silica Membrane Layer Synthesis for Hydrogen Separation: Effect of Activated Sublayers [Volume 6, Issue 1, 2019, Pages 1-9]
Babaluo*, Ali Akbar Modeling and simulation of the fluid dynamic and performance of the Pd-based membrane by CFD for hydrogen separation [Volume 9, Issue 1, 2022, Pages 19-25]
Babibi, Biuck Ethanol electrooxidation on the Co@Pt core-shell nanoparticles modified carbon-ceramic electrode in acidic and alkaline media [Volume 3, Issue 1, 2016, Pages 19-31]
Bachache, Nasseer KassimA new SEPIC-Zeta bidirectional converter with high efficiency for renewable energy systems [Volume 11, Issue 3, 2024, Pages 142-152]
Badrnezhad, Ramin Kinetics study of hydrogen evolution reaction on a high porous three dimensional NiPC alloy [Volume 8, Issue 2, 2021, Pages 95-101]
Baghban Yousefkhani, Mojtaba A Double Pipe Heat Exchanger Design and Optimization for Cooling an Alkaline Fuel Cell System [Volume 1, Issue 4, 2014, Pages 223-231]
Bagheri, Ahmad Preparation and Characterization of Electrocatalyst Nanoparticles for Direct Methanol Fuel Cell Applications Using β-D-glucose as Protection Agent [Volume 4, Issue 1, 2017, Pages 1-11]
Bagherian Farahabadi, Hossein High Step-Up Converter with Low Voltage Stress for Fuel Cell Applications [Volume 9, Issue 2, 2022, Pages 117-132]
Bagherian Farahabadi, Hossein Experimental Investigation of a High Efficiency Power Path Controller for PEM Fuel Cell and Battery Hybrid System [Volume 9, Issue 2, 2022, Pages 149-161]
Bagherian Farahabadi, Hossein Fuel Cell Power System Conceptual Design for Unmanned Underwater Vehicle [Volume 10, Issue 1, 2023, Pages 33-50]
Bagherian Farahabadi, Hossein Assessment of a novel photovoltaic-electrolyzer-fuel cell-ORC hybrid energy system for hydrogen and power production [Volume 10, Issue 2, 2023, Pages 111-130]
Baharlou-Houreh, Nasser Parametric study of a membrane energy exchanger based on energy, entropy, and exergy analysis for proton exchange membrane fuel cell application [Volume 11, Issue 3, 2024, Pages 153-168]
Baheri, Sima The effect of inclined radial flow in proton exchange membrane fuel cells performance [Volume 1, Issue 3, 2014, Pages 141-152]
Baheri Islami, Sima The effect of vertical injection of reactants to the membrane electrode assembly on the performance of a PEM fuel cell [Volume 3, Issue 3, 2016, Pages 167-182]
Baheri Islami, Sima The effect of increasing the multiplicity of flow fields contact surface on the performance of PEM fuel cell [Volume 4, Issue 1, 2017, Pages 69-83]
Bahoosh, Mohsen Process Modeling and Optimization of Coal Gasification for Enhanced Hydrogen and Syngas Yield in Sponge Iron Production [(Articles in Press)]
Bahri Rasht Abadi, Mohammad Mahdi How to Design a Cryogenic Joule-Thomson Cooling System: Case Study of Small Hydrogen Liquefier [Volume 3, Issue 2, 2016, Pages 113-125]
Bahri Rasht Abadi, Mohammad Mahdi Influence of unsuitable operational conditions on the transient performance of a small hydrogen liquefier [Volume 3, Issue 3, 2016, Pages 199-212]
Bakhshi, Atieh Implementation of Chitosan modified ultrafiltration hollow fiber as proton exchange membrane of ml-scale microbial fuel cells [Volume 10, Issue 4, 2023, Pages 299-310]
Bakhtiari, Maliheh Electrochemical evaluation of electrodeposited platinum on a modified carbon substrate with cobalt, nickel and copper doped zinc oxide for the methanol oxidation reaction [Volume 5, Issue 1, 2018, Pages 49-55]
Baniassadi, Majid A new approach to microstructure optimization of solid oxide fuel cell electrodes [Volume 4, Issue 2, 2017, Pages 93-102]
Barzegar Gerdroodbary, Mostafa Investigating Numerically the Impact of Phase Change Materials on Heat Exchangers to Optimize Energy Consumption [Volume 13, Issue 2, 2026, Pages 105-112]
Barzegari, mohammad Experimental study and numerical modeling of vibrational characteristics of a 500W PEM fuel cell stack [Volume 9, Issue 1, 2022, Pages 39-52]
Barzegari, Mohammad MahdiDeveloped endplate geometry for uniform contact pressure distribution over PEMFC active area [Volume 7, Issue 1, 2020, Pages 1-12]
Barzegari, Mohammad MahdiDesign and Analysis of an Innovative Dead-end Cascade-type PEMFC Stack at Different Orientations [Volume 7, Issue 1, 2020, Pages 81-96]
Barzegari, Mohammad MahdiExperimental Analysis of Fiber Laminating Effects on Flexural Rigidity of Composite Endplates for Use in PEM Fuel Cells [Volume 9, Issue 2, 2022, Pages 97-106]
Barzegari, Mohammad MahdiNumerical-experimental study on the Failure Behavior of Graphite-Based Composite Bipolar Plate for PEM fuel cells [Volume 9, Issue 2, 2022, Pages 107-116]
Barzegari, Mohammad MahdiMechanical and chemical characteristics of the PEM fuel cell sealants in simulated environment [Volume 9, Issue 2, 2022, Pages 163-178]
Barzegari, Mohammad MahdiStudy of the forming process effects on the wrinkling and thinning percentage of the micro-channels with serpentine layout [Volume 10, Issue 1, 2023, Pages 81-93]
Barzegari, Mohammad MahdiStudy of Contact Pressure Distribution over MEA of the Three-Cell PEMFC with Metallic Bipolar Plates [Volume 10, Issue 1, 2023, Pages 69-79]
Barzegari, Mohammad Mahdi Evaluation of EPDM Elastomeric Seals for Application in Polymer Electrolyte Membrane Fuel Cells [Volume 12, Issue 4, 2025, Pages 253-264]
Barzegari*, Mohammad MahdiNumerical-experimental study on the thickness distribution of metallic bipolar plates for PEM fuel cells [Volume 9, Issue 1, 2022, Pages 1-18]
Barzgari, Mahboobeh A two-phase, non-isothermal model for water management in the cathode gas diffusion layer of polymer electrolyte membrane fuel cells [Volume 10, Issue 3, 2023, Pages 215-231]
Basafa, Elahe Performance verification of a laboratory scale hydrogen/oxygen combustion chamber [Volume 9, Issue 1, 2022, Pages 27-38]
Basile, Angelo Silica membrane performance for hydrogen separation from methanol steam reforming products: Assessment of different multistage membrane schemes [Volume 6, Issue 1, 2019, Pages 59-70]
Bazgir, Maryam Power Management in Grid-Scale Energy Storage Systems; A Case Study of Trends [Volume 12, Issue 2, 2025, Pages 105-126]
Bazooyar, Bahamin New Mathematical Modelling and Dynamic Simulation of a Molten Carbonate Fuel Cell [Volume 2, Issue 4, 2015, Pages 241-252]
Behbahani, Amin Hydrothermal synthesis of nano-size zirconia using commercial zirconia powder: process optimization through response surface methodology [Volume 1, Issue 3, 2014, Pages 163-173]
Behjatmanesh Ardakani, Reza Evaluation of electrocatalytic performance of PtCo/C nanoparticles in different proportions of cobalt for oxygen reduction reaction [Volume 10, Issue 4, 2023, Pages 291-297]
Beydaghi, Hossein Preparation and Characterization of Electrocatalyst Nanoparticles for Direct Methanol Fuel Cell Applications Using β-D-glucose as Protection Agent [Volume 4, Issue 1, 2017, Pages 1-11]
Boshagh, Fatemeh A Critical Review of Continuous Biohydrogen Production [Volume 13, Issue 2, 2026, Pages 83-104]
Bozorgmehri, Shahriar Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]
Bozorgmehri, Shahriar An Experimental Investigation on Simultaneous Effects of Oxygen Ratio and Flow-Rate in SOFCs Performance Fueled by a Mixture of Methane and Oxygen [Volume 6, Issue 1, 2019, Pages 11-22]
Bozorgmehri, Shahriar Future prospects for solar energy production and storage in Iran [Volume 11, Issue 4, 2024, Pages 247-258]
Bozorgmehri, Shahriar Power Management in Grid-Scale Energy Storage Systems; A Case Study of Trends [Volume 12, Issue 2, 2025, Pages 105-126]
C
Chitsaz, Ata Parametric Study of an ORC-EJR Cycle Based on Energy and Exergy Analysis for Power, Heating, Cooling, and Hydrogen Production [Volume 12, Issue 2, 2025, Pages 75-82]
Chitsaz, Ata Studying the Waste Heat Recovery of a Gas Turbine Cycle from a Thermodynamic Perspective [Volume 12, Issue 2, 2025, Pages 127-134]
Chitsaz, Ata Thermoeconomic Study of a Multigeneration System with Waste Heat Recovery from a Gas Turbine [Volume 12, Issue 4, 2025, Pages 265-274]
Chitsaz, Ata 4E analysis of a geothermal-based multigeneration system [(Articles in Press)]
Chitsaz, Ata A solar-assisted NGCC-based multigeneration system with LNG cold-exergy recovery and hydrogen production: Thermodynamic, exergoeconomic, and environmental analysis [(Articles in Press)]
Chitsaz, Ata Exergy and energy analysis of a combined cooling, heat, hydrogen and power generation system utilizing geothermal energy [(Articles in Press)]
Colpan, Can Ozgur Numerical investigation of methanol crossover through the membrane in a direct methanol fuel cell [Volume 5, Issue 1, 2018, Pages 21-33]
D
Dadashi Firouzjaei, Kamran Experimental Study of Oxidant Effect on Lifetime of PEM Fuel Cell [Volume 7, Issue 1, 2020, Pages 33-43]
Dadashi Firouzjaei, Kamran New criterion for achieving efficient flow fields in PEM fuel cells [Volume 11, Issue 1, 2024, Pages 46-67]
Danesh Azari, Mohammad Enhanced Cooling System Design for Single and Double Pass Condensers: A Comprehensive Technical, Chemical, Economic, and Environmental Feasibility Study [Volume 12, Issue 3, 2025, Pages 181-192]
Daneshtalab, Reza A high performance lithium-ion battery using LiNa0.02K0.01FePO4/C as cathode material and anatase TiO2 nanotube arrays as anode material [Volume 4, Issue 1, 2017, Pages 27-35]
Darab, Mahdi Optimum calcination temperature for the synthesis of nanostructured alumina for energy storage heat management applications [Volume 11, Issue 1, 2024, Pages 8-18]
Darabi, Zeinab Palladium composite membrane with high reversibility of CO2 poisoning [Volume 5, Issue 1, 2018, Pages 13-19]
Darabi, Zeinab Modeling and simulation of the fluid dynamic and performance of the Pd-based membrane by CFD for hydrogen separation [Volume 9, Issue 1, 2022, Pages 19-25]
Dashtizad, Valiollah Synthesis Zr-Co-Y based chemical getter and evaluation its vacuum preserving, sorption characteristics, and hydrogen absorption [Volume 6, Issue 2, 2019, Pages 171-184]
Dawood Salman Salman, Hussein Analysis and performance evaluation of a multigeneration system applying PV/T and PTC solar collectors from hydrogen and freshwater production point of view [Volume 11, Issue 3, 2024, Pages 205-214]
Dehghani, Majid Small signal stability analysis and frequency control in a single-area multi-source electrical energy system [Volume 11, Issue 2, 2024, Pages 107-116]
Dehghani, Majid Analysis and Simulation of the Effect of Combining Load Frequency Control and Automatic Voltage Regulation in Hydrothermal Power System [Volume 13, Issue 1, 2026, Pages 39-54]
Delshad, Majid Analysis and implementation of high step-up SEPIC converter without coupled inductor for high voltage applications [Volume 10, Issue 3, 2023, Pages 201-213]
Delshad, Majid A new SEPIC-Zeta bidirectional converter with high efficiency for renewable energy systems [Volume 11, Issue 3, 2024, Pages 142-152]
Delshad, Majid A new ZVT interleaved high step-up converter with ripple cancellation for photovoltaic systems [Volume 11, Issue 4, 2024, Pages 225-236]
Delshad, Majid An Improved Zero Current Transition High Step-Up Single-Switch Converter for Fuel Cell Applications [Volume 12, Issue 3, 2025, Pages 217-226]
Delshad, Majid A New SEPIC-Flyback DC-DC Converter for Fuel Cell Systems [Volume 13, Issue 1, 2026, Pages 55-66]
Ebrahimi, Atiyeh Effect of batch vs. continuous mode of operation on microbial desalination cell performance treating municipal wastewater [Volume 3, Issue 4, 2016, Pages 281-290]
Ebrahimi, Fateme Facile hydrothermal synthesis and electrochemical investigation of a free-standing cobalt oxide hierarchical nanostructure electrode on a porous carbon structure as an efficient supercapacitor [Volume 11, Issue 2, 2024, Pages 123-130]
Ebrahimpour, Reza Modeling of measurement error in refractive index determination of fuel cell using neural network and genetic algorithm [Volume 1, Issue 2, 2014, Pages 95-104]
Ehghaghi, Mir Biuok Exergy-Economic analysis of combined cooling, heat and power system utilizing solar energy and biomass [Volume 11, Issue 4, 2024, Pages 271-284]
Eikani, Mohammad Hasan Enhancing the CO tolerance of Pt/C as PEM fuel cell anode catalyst by modifying the catalyst synthesis method [Volume 6, Issue 1, 2019, Pages 71-81]
Eikani *, Mohammad H. Three-dimensional modeling of transport phenomena in a planar anode-supported solid oxide fuel cell [Volume 4, Issue 1, 2017, Pages 37-52]
Elhami, Mohammad-Reza Numerical analysis of reactant transport in the novel tubular polymer electrolyte membrane fuel cells [Volume 2, Issue 3, 2015, Pages 181-196]
Eliassi, Ali Hydrogen production by steam reforming of dimethyle ether over Cu/ZnO/Al2O3 and H-ZSM-5 catalysts: An experimental and modeling study [Volume 1, Issue 3, 2014, Pages 153-161]
Emami, Leyla Numerical-experimental study on the Failure Behavior of Graphite-Based Composite Bipolar Plate for PEM fuel cells [Volume 9, Issue 2, 2022, Pages 107-116]
Emamifar, Armin Performance assessment of a power/refrigeration cogeneration system driven by the waste heat of a solid oxide fuel cell [Volume 10, Issue 3, 2023, Pages 241-256]
Emamifar*, Armin Thermodynamic and exergoeconomic evaluation of waste heat recovery for hydrogen production in a CCHP system [Volume 9, Issue 1, 2022, Pages 53-68]
Emhanna, Saleh A.Prospects and challenges for the production and use of green hydrogen as a promising energy in Libya [Volume 11, Issue 1, 2024, Pages 1-7]
Esfandeh, Somayeh Modeling of measurement error in refractive index determination of fuel cell using neural network and genetic algorithm [Volume 1, Issue 2, 2014, Pages 95-104]
Eshghi, Abolfath Electrodeposition of platinum nanoparticles on reduced graphene oxide as an efficient catalyst for oxygen reduction reaction [Volume 2, Issue 1, 2015, Pages 7-12]
Eshghi, Abolfath Palladium nanoparticles supported on carbon black powder as an effective anodic catalyst for application in a direct glucose alkaline fuel cell [Volume 3, Issue 1, 2016, Pages 11-17]
Eskandari, Amin Numerical Analysis of Key Parameters Influencing the Replacement of a Shell-and-Tube Heat Exchanger with an Automotive Radiator [Volume 13, Issue 1, 2026, Pages 31-38]
Eskandari, Amin Innovative Shell-and-Tube Heat Exchanger Design for Automotive Radiator Replacement: A Novel Approach to Replacing Car Radiators [Volume 12, Issue 4, 2025, Pages 275-284]
Eskandarijam, Jafar Numerical-experimental study on the Failure Behavior of Graphite-Based Composite Bipolar Plate for PEM fuel cells [Volume 9, Issue 2, 2022, Pages 107-116]
Esmaeilifar, Ashkan Hydrothermal synthesis of nano-size zirconia using commercial zirconia powder: process optimization through response surface methodology [Volume 1, Issue 3, 2014, Pages 163-173]
Esmailian, Mohammad The Effect of Pre- Stretching Treatment on the Microstructure, Mechanical Properties and Corrosion Resistance of 7075 Aluminum Alloy used in PEMFC [Volume 10, Issue 3, 2023, Pages 233-239]
Etminan, Amin Optimization of Renewable Energy and Hydrogen Production for Residential Load in Alberta: A CFD Study [Volume 12, Issue 3, 2025, Pages 149-168]
Eyvazi, Ali Thermoeconomic Analysis and Optimization of a Novel Geothermal Energy-Based Multigeneration System for Liquid Hydrogen, Hot Water, Cooling and Power Production [Volume 13, Issue 2, 2026, Pages 149-166]
F
Faghani, Farhad Analysis and Simulation of the Effect of Combining Load Frequency Control and Automatic Voltage Regulation in Hydrothermal Power System [Volume 13, Issue 1, 2026, Pages 39-54]
Fallah, Narges Kinetic study of CO desorption from cathodic electrochemically treated carbon paper supported Pt electrodes [Volume 4, Issue 3, 2017, Pages 201-207]
Fani, Bahador Analysis and implementation of high step-up SEPIC converter without coupled inductor for high voltage applications [Volume 10, Issue 3, 2023, Pages 201-213]
Fani, Bahador A new SEPIC-Zeta bidirectional converter with high efficiency for renewable energy systems [Volume 11, Issue 3, 2024, Pages 142-152]
Fani, Bahador A New SEPIC-Flyback DC-DC Converter for Fuel Cell Systems [Volume 13, Issue 1, 2026, Pages 55-66]
Faramarzi, Saman Proposing a Hydrogen Liquefaction Cycle for Geothermal Energy Storage in an Innovative Multi-Generation System [Volume 12, Issue 1, 2025, Pages 1-8]
Farhadi, Mousa Energy Management Simulation in a PEM Fuel Cell System [Volume 2, Issue 1, 2015, Pages 1-6]
Farhadian, Nafiseh Prediction the hydrogen adsorption isotherm on nickel decorated carbon nanotubes by applying artificial neural network modeling [Volume 8, Issue 2, 2021, Pages 61-68]
Farjadmanesh, Atefeh A Critical Review of Continuous Biohydrogen Production [Volume 13, Issue 2, 2026, Pages 83-104]
Farnak, Mostafa An Experimental Investigation on Simultaneous Effects of Oxygen Ratio and Flow-Rate in SOFCs Performance Fueled by a Mixture of Methane and Oxygen [Volume 6, Issue 1, 2019, Pages 11-22]
Farnood, Ameneh Hydrogen sensing by localized surface plasmon resonance in colloidal solutions of Au-WO3-Pd [Volume 4, Issue 2, 2017, Pages 119-124]
Farzad, Mohammad Ali Performance assessment of a SOFC cogeneration system for residential buildings located in eastern Iran [Volume 3, Issue 2, 2016, Pages 81-97]
Farzad, Mohammed AliNon-Isothermal Modeling of Planar Solid Oxide Fuel Cell [Volume 12, Issue 2, 2025, Pages 135-148]
Farzaneh, Farshid Iranian hydrogen production insight: research trends and outlook [Volume 8, Issue 1, 2021, Pages 23-33]
Fassih, Amir Hydrogen Utilization in Free Piston Engines: A Performance Investigation [Volume 12, Issue 1, 2025, Pages 31-44]
Fassih, Amir Utilization of a Fifth-Order Model for Analyzing Stirling Oscillators [Volume 12, Issue 3, 2025, Pages 169-180]
Fathi, Hossein The Impact of Wettability on Effective Properties of Cathode Catalyst Layer in a Proton Exchange Membrane Fuel Cell [Volume 3, Issue 3, 2016, Pages 233-245]
Fathollahi Zonouz, Abolfazl Effect of temperature on kinetics of the hydrogen evolution reaction on Ni-P-C cathodes in alkaline solution [Volume 1, Issue 4, 2014, Pages 215-222]
Fattahzadeh, Mehrdad Synthesis Zr-Co-Y based chemical getter and evaluation its vacuum preserving, sorption characteristics, and hydrogen absorption [Volume 6, Issue 2, 2019, Pages 171-184]
Fazeli, Khavar Lattice Boltzmann modeling of two component gas diffusion in solid oxide fuel cell [Volume 2, Issue 4, 2015, Pages 263-270]
Fili, Mohammad Hossein Modeling and experimental study on the sealing gasket of proton exchange membrane fuel cells [Volume 3, Issue 3, 2016, Pages 213-220]
G
Ganjali, Mohammad Reza Facile Synthesis of N, S-Doped Graphene from Sulfur Trioxide Pyridine Precursor for the Oxygen Reduction Reaction [Volume 4, Issue 3, 2017, Pages 231-240]
Garmabi, Arash Thermodynamic and Thermoeconomic Analysis of the Use of Wind and Solar Energy to Supply the Energy Requirements of a Multigeneration System [Volume 13, Issue 2, 2026, Pages 167-186]
Gashoul, Fatemeh Studies on the SPEEK membrane with low degree of sulfonation as a stable proton exchange membrane for fuel cell applications [Volume 3, Issue 3, 2016, Pages 221-232]
Ghadamian, Hossein A Double Pipe Heat Exchanger Design and Optimization for Cooling an Alkaline Fuel Cell System [Volume 1, Issue 4, 2014, Pages 223-231]
Ghadamian, Hossein Energy Price Analysis of a Biomass Gasification-Solid Oxide Fuel Cell-Gas Turbine Power Plant [Volume 3, Issue 1, 2016, Pages 45-58]
Ghaderi, Serveh Ni@Pt core-shell nanoparticles as an improved electrocatalyst for ethanol electrooxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 109-119]
Ghaderi, Serveh Ethanol electrooxidation on the Co@Pt core-shell nanoparticles modified carbon-ceramic electrode in acidic and alkaline media [Volume 3, Issue 1, 2016, Pages 19-31]
Ghadimi, Mojtaba Developed endplate geometry for uniform contact pressure distribution over PEMFC active area [Volume 7, Issue 1, 2020, Pages 1-12]
Ghadimi, Mojtaba Mechanical and chemical characteristics of the PEM fuel cell sealants in simulated environment [Volume 9, Issue 2, 2022, Pages 163-178]
Ghadimi, Mojtaba Study of Contact Pressure Distribution over MEA of the Three-Cell PEMFC with Metallic Bipolar Plates [Volume 10, Issue 1, 2023, Pages 69-79]
Ghaebi, Hadi Thermoeconomic Analysis and Optimization of a Novel Geothermal Energy-Based Multigeneration System for Liquid Hydrogen, Hot Water, Cooling and Power Production [Volume 13, Issue 2, 2026, Pages 149-166]
Ghafarian-Zahmatkesh, Hossein Preparation and Characterization of Electrocatalyst Nanoparticles for Direct Methanol Fuel Cell Applications Using β-D-glucose as Protection Agent [Volume 4, Issue 1, 2017, Pages 1-11]
Ghaffari, M.D. Sulfurous Analysis of Bioelectricity Generation from Sulfate-reducing Bacteria (SRB) in a Microbial Fuel Cell [Volume 4, Issue 4, 2017, Pages 307-321]
Ghafouri Roozbahani, Mohammad Ali Hydrogen production via steam reforming of LPG on Ni/Zeolite catalysts [Volume 1, Issue 4, 2014, Pages 233-238]
Ghafouri Roozbahani, Mohammad Ali Methanol steam reforming; Effects of various metal oxides on the properties of a Cu-based catalyst [Volume 3, Issue 4, 2016, Pages 291-299]
Ghamari Arbati, Somayeh Preparation, characterization and the study of electrochemical behavior of Y-doped Bariumcerate powders by new precursors [Volume 10, Issue 1, 2023, Pages 1-10]
Ghamari Arbati, Somayeh Nickel oxide-gadolinium doped ceria synthesized by new methods as anodes material for solid oxide fuel cells [Volume 9, Issue 2, 2022, Pages 133-147]
Ghanbarian, Asrin Performance Improvement of PEM Fuel Cells Using Air Channel Indentation; Part I: Mechanisms to Enrich Oxygen Concentration in Catalyst Layer [Volume 1, Issue 4, 2014, Pages 199-207]
Ghanbarian, Asrin Generalization of a CFD Model to Predict the Net Power in PEM Fuel Cells [Volume 6, Issue 1, 2019, Pages 23-37]
Ghanbarlou, Hosna Preparation of Nitrogen-Doped Graphene By Solvothermal Process as Supporting Material for Fuel Cell Catalysts [Volume 1, Issue 2, 2014, Pages 113-119]
Ghani Harzand, Ayda Synthesis and electrochemical properties of Sr3Fe1.8Co0.2O7 as a solid oxide fuel cell cathode [Volume 8, Issue 1, 2021, Pages 51-58]
Gharibi, Hussein Determination of thermodynamic parameters of hydrogen permeation of palladium membrane for considering the effect of stainless steel support [Volume 1, Issue 1, 2014, Pages 1-10]
Gharibi, Hussein One –step synthesis of PdCo alloy nanoparticles decorated on reduced grahene oxide as an Electro-catalyst for Oxygen Reduction Reaction in Passive Direct Methanol Fuel Cells [Volume 2, Issue 1, 2015, Pages 27-33]
Gharibi, Hussein Effect of Solution Dielectric Constant on the Preparation of Gas Diffusion Electrode Reaction Layer for the Oxygen Reduction Reaction [Volume 10, Issue 2, 2023, Pages 97-109]
Ghasemian, Mehran New criterion for achieving efficient flow fields in PEM fuel cells [Volume 11, Issue 1, 2024, Pages 46-67]
Ghasemi Tamami, Peyman Investigation and optimization of a PEM fuel cell’s electrical and mechanical behavior [Volume 3, Issue 1, 2016, Pages 1-10]
Ghasemi Tamami, Peyman Modeling and experimental study on the sealing gasket of proton exchange membrane fuel cells [Volume 3, Issue 3, 2016, Pages 213-220]
Ghasemi Tamami, Peyman Design and Investigation of Honeycomb End Plates for PEM Fuel Cells [Volume 4, Issue 3, 2017, Pages 189-199]
Ghasemzadeh, Kamran Silica membrane performance for hydrogen separation from methanol steam reforming products: Assessment of different multistage membrane schemes [Volume 6, Issue 1, 2019, Pages 59-70]
Ghiasi, Mohammad Iman Hierarchical Control Strategy of Heat and Power for Zero Energy Buildings including Hybrid Fuel Cell/Photovoltaic Power Sources and Plug-in Electric Vehicle [Volume 3, Issue 1, 2016, Pages 33-44]
Gholamian, Ehsan Comparison of waste heat recovery from a Proton Exchange Membrane fuel cell by gas turbine or Organic Rankin Cycle: a display of 3E analysis [Volume 8, Issue 2, 2021, Pages 103-112]
Gholaminezad, Iman Synthesis and investigation on microstructure and electrical conductivity of Ruddlesden-Popper phase, La1.9Sr0.1Ni0.7Cu0.3O4 (LSNC), as cathode material for intermediate temperature solid oxide fuel cells [Volume 8, Issue 2, 2021, Pages 69-76]
Gholizade Atani, Ahmad Nanostructured Palladium-Doped Silica Membrane Layer Synthesis for Hydrogen Separation: Effect of Activated Sublayers [Volume 6, Issue 1, 2019, Pages 1-9]
Gholy Nejad, Puriya Mohamad Numerical study on the performance prediction of a proton exchange membrane (PEM) fuel cell [Volume 4, Issue 4, 2017, Pages 249-263]
Ghorbani, Hamid A sensorless adaptive non-linear control scheme for minimizing the stator energy losses of IPMSM [Volume 11, Issue 2, 2024, Pages 131-141]
Ghorbani, Shaban Reza Density Functional Studies on Crystal Structure and electronic properties of Potassium Alanate as a candidate for Hydrogen storage [Volume 2, Issue 3, 2015, Pages 169-179]
Golkar, Masoud Optimal Intelligent Control of Plug-in Fuel Cell Electric Vehicles in Smart Electric Grids [Volume 1, Issue 1, 2014, Pages 55-64]
Golkar, Seyed HadiA two-phase, non-isothermal model for water management in the cathode gas diffusion layer of polymer electrolyte membrane fuel cells [Volume 10, Issue 3, 2023, Pages 215-231]
Golkar, Seyed Hadi Modeling and Optimization of non - isothermal two- phase flow in the cathode gas diffusion layer of PEM fuel cell [Volume 2, Issue 3, 2015, Pages 159-168]
Golmohammad, Mohammad Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]
Golmohammad, Mohammad Iranian hydrogen production insight: research trends and outlook [Volume 8, Issue 1, 2021, Pages 23-33]
Golmohammad, Mohammad Synthesis and characterization of nanostructured Cux (Mn1.5-x/2Co1.5-x/2)O4 as an interconnect coating for solid oxide fuel cell [Volume 8, Issue 1, 2021, Pages 35-41]
Golmohammad, Mohammad Synthesis and electrochemical properties of Sr3Fe1.8Co0.2O7 as a solid oxide fuel cell cathode [Volume 8, Issue 1, 2021, Pages 51-58]
Golmohammad, Mohammad Future prospects for solar energy production and storage in Iran [Volume 11, Issue 4, 2024, Pages 247-258]
Golmohammad, Mohammad Power Management in Grid-Scale Energy Storage Systems; A Case Study of Trends [Volume 12, Issue 2, 2025, Pages 105-126]
Golmohammad**, Mohammad Synthesis and characterization of Ag-Y co-doped Mn-Co spinel for solid oxide fuel cell application [Volume 8, Issue 1, 2021, Pages 43-49]
Golmohammadi, Mahsa Machine Learning Assisted Prediction and Analysis of Future Lithium Prices [(Articles in Press)]
Golzari, Alireza New Mathematical Modelling and Dynamic Simulation of a Molten Carbonate Fuel Cell [Volume 2, Issue 4, 2015, Pages 241-252]
H
Habibi, Biuck Ni@Pt core-shell nanoparticles as an improved electrocatalyst for ethanol electrooxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 109-119]
Habibi, Biuck Platinum nanoparticles/functionalized carbon nanoparticles composites supported on the carbon-ceramic electrode and their electroactivity for ethanol oxidation [Volume 5, Issue 1, 2018, Pages 35-47]
Habibi, Meysam Machine Learning Assisted Prediction and Analysis of Future Lithium Prices [(Articles in Press)]
Habibnia, Mostafa Investigation and optimization of a PEM fuel cell’s electrical and mechanical behavior [Volume 3, Issue 1, 2016, Pages 1-10]
Habibnia, Mostafa Modeling and experimental study on the sealing gasket of proton exchange membrane fuel cells [Volume 3, Issue 3, 2016, Pages 213-220]
Habibnia, Mostafa Design and Investigation of Honeycomb End Plates for PEM Fuel Cells [Volume 4, Issue 3, 2017, Pages 189-199]
Habibnia, Mostafa Developed endplate geometry for uniform contact pressure distribution over PEMFC active area [Volume 7, Issue 1, 2020, Pages 1-12]
Habibpour, Razeih Interaction of atomic hydrogen with monometallic Au(100), Cu(100), Pt(100) surfaces and surface of bimetallic Au@Cu(100), Au@Pt(100) overlayer systems: The role of magnetism [Volume 4, Issue 3, 2017, Pages 209-218]
Habibzadeh, Amin Thermodynamic evaluation of a novel geothermal and solar-driven multigeneration system for hydrogen and freshwater production [Volume 10, Issue 1, 2023, Pages 51-67]
Haghani, Ahmad Generating electricity using pico hydro-based power plant in Koohrang county, Iran: effect of energy storage type [Volume 11, Issue 1, 2024, Pages 19-38]
Haghighi, Mohammad Effect of Sorbitol/Oxidizer Ratio on Microwave Assisted Solution Combustion Synthesis of Copper Based Nanocatalyst for Fuel Cell Grade Hydrogen Production [Volume 2, Issue 4, 2015, Pages 227-240]
Haghigi, Mohmmad Preparation of Pd composite membrane via organic-inorganic activation method in electroless plating technique [Volume 2, Issue 3, 2015, Pages 151-158]
Haghparast Kasahani, Arash Future prospects for solar energy production and storage in Iran [Volume 11, Issue 4, 2024, Pages 247-258]
Hajizadeh, Amin Optimal Intelligent Control of Plug-in Fuel Cell Electric Vehicles in Smart Electric Grids [Volume 1, Issue 1, 2014, Pages 55-64]
Hajizadeh, Amin Hierarchical Control Strategy of Heat and Power for Zero Energy Buildings including Hybrid Fuel Cell/Photovoltaic Power Sources and Plug-in Electric Vehicle [Volume 3, Issue 1, 2016, Pages 33-44]
Hasan, Muhammad Razib Optimization of Renewable Energy and Hydrogen Production for Residential Load in Alberta: A CFD Study [Volume 12, Issue 3, 2025, Pages 149-168]
Hasani, Elham Electrochemical simulation of lithium-ion batteries: a novel computational approach for optimizing performance [Volume 11, Issue 4, 2024, Pages 215-224]
Hashemi, Mahnaz Analysis of the Impact of Energy Storage Units on Frequency Regulation Stability in Hydrothermal Power Plant Using State Space Modeling [Volume 13, Issue 1, 2026, Pages 1-16]
Hassani, Mojtaba Experimental Study of Oxidant Effect on Lifetime of PEM Fuel Cell [Volume 7, Issue 1, 2020, Pages 33-43]
Hassaninejad-Darzi, Seyed Karim Electrocatalytic oxidation of glucose on the modified carbon paste electrode with sodalite nanozeolite for fuel cell [Volume 2, Issue 1, 2015, Pages 47-58]
Hassanzadeh, Hasan A two-phase, non-isothermal model for water management in the cathode gas diffusion layer of polymer electrolyte membrane fuel cells [Volume 10, Issue 3, 2023, Pages 215-231]
Hassanzadeh, Hasan Investigation of a fuel cell (FC) system for vehicle [Volume 11, Issue 4, 2024, Pages 259-270]
Hassanzadeh, Hasan Non-Isothermal Modeling of Planar Solid Oxide Fuel Cell [Volume 12, Issue 2, 2025, Pages 135-148]
Hassanzadeh, Hassan Modeling heat and mass transfer in laminar forced flow between parallel plates channel imposed to suction or injection [Volume 2, Issue 1, 2015, Pages 35-46]
Hassanzadeh, Hassan Modeling and Optimization of non - isothermal two- phase flow in the cathode gas diffusion layer of PEM fuel cell [Volume 2, Issue 3, 2015, Pages 159-168]
Hassanzadeh, Hassan Performance assessment of a SOFC cogeneration system for residential buildings located in eastern Iran [Volume 3, Issue 2, 2016, Pages 81-97]
Hassanzadeh, Hassan Effect of CO in the reformatted fuel on the performance of Polymer Electrolyte Membrane (PEM) fuel cell [Volume 4, Issue 2, 2017, Pages 153-165]
Hassanzadeh, Hassan Lattice Boltzmann simulation of water transfer in gas diffusion layers with porosity gradient of polymer electrolyte membrane fuel cells with parallel processing on GPU [Volume 7, Issue 1, 2020, Pages 45-60]
Hassanzadeh, Hassan Modeling of mass transfer in a T-shaped microfluidic fuel cell [Volume 10, Issue 2, 2023, Pages 147-156]
Hassanzadeh Afrouzi, Hamid Evaluation of EPDM Elastomeric Seals for Application in Polymer Electrolyte Membrane Fuel Cells [Volume 12, Issue 4, 2025, Pages 253-264]
Hazzab, Abdaldjabar Development and Simulation of a PEM Fuel Cell model for Prediction of Water Content and Power Generation [Volume 4, Issue 4, 2017, Pages 289-299]
Hedayati, Ali Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]
Heydaran-Daroogheh-Amnyieh, Zahra Analysis and implementation of high step-up SEPIC converter without coupled inductor for high voltage applications [Volume 10, Issue 3, 2023, Pages 201-213]
Heydarian-Forushani, Ehsan A new ZVT interleaved high step-up converter with ripple cancellation for photovoltaic systems [Volume 11, Issue 4, 2024, Pages 225-236]
Honarvar, Mohamadamin Analysis and Simulation of the Effect of Combining Load Frequency Control and Automatic Voltage Regulation in Hydrothermal Power System [Volume 13, Issue 1, 2026, Pages 39-54]
Hooshyari, Khadijeh Preparation and Characterization of Electrocatalyst Nanoparticles for Direct Methanol Fuel Cell Applications Using β-D-glucose as Protection Agent [Volume 4, Issue 1, 2017, Pages 1-11]
Hormozi, Faramarz Reforming Integrated with Oxidation in Micro-Heat Exchanger Reactor with Circular Micro-Channels [Volume 1, Issue 2, 2014, Pages 65-74]
Hoshyar, Najmeh Optimization of Preparation Factors for Cerium Oxide Synthesis as a Support for CO PrOx Catalyst [Volume 1, Issue 3, 2014, Pages 189-197]
Hoshyar, Najmeh Effect of platinum on Ceria supported Cu catalysts for PrOx process in fuel processors [Volume 1, Issue 1, 2014, Pages 1-100]
Hossainpour, Siamak The effect of vertical injection of reactants to the membrane electrode assembly on the performance of a PEM fuel cell [Volume 3, Issue 3, 2016, Pages 167-182]
Hossainpour, Siamak The effect of increasing the multiplicity of flow fields contact surface on the performance of PEM fuel cell [Volume 4, Issue 1, 2017, Pages 69-83]
Hosseini, Ehsan Analysis of the Impact of Energy Storage Units on Frequency Regulation Stability in Hydrothermal Power Plant Using State Space Modeling [Volume 13, Issue 1, 2026, Pages 1-16]
Hosseini, Sonia Thermo-Economic Analysis of Triple Production System, Combination with Solid Oxide Fuel Cell and Absorption Chiller [Volume 12, Issue 1, 2025, Pages 59-74]
Hosseini, S.Vahid Study the stability of Si, Ge, Fe and Co in the interior surface of metallic carbon nanotube for hydrogen storage [Volume 2, Issue 3, 2015, Pages 197-205]
Hosseinlar, Sayyed Hassan A solar-assisted NGCC-based multigeneration system with LNG cold-exergy recovery and hydrogen production: Thermodynamic, exergoeconomic, and environmental analysis [(Articles in Press)]
Hosseinpour, Morteza Future prospects for solar energy production and storage in Iran [Volume 11, Issue 4, 2024, Pages 247-258]
Hussein, Eman Shakir Hussein Applying geothermal and solar energies for the thermodynamic estimation of the multigeneration system’s performance in producing power, freshwater and hydrogen [Volume 11, Issue 3, 2024, Pages 179-188]
Hussein Obaid Ajam, Ahmed Thermodynamic investigation of a solar-based multigeneration system using Al2O3-Thermonol VP1 nanofluid [Volume 11, Issue 4, 2024, Pages 237-246]
I
Imanlou, Sanaz Synthesis and investigation on microstructure and electrical conductivity of Ruddlesden-Popper phase, La1.9Sr0.1Ni0.7Cu0.3O4 (LSNC), as cathode material for intermediate temperature solid oxide fuel cells [Volume 8, Issue 2, 2021, Pages 69-76]
Imanzadeh, Hamideh Platinum nanoparticles/functionalized carbon nanoparticles composites supported on the carbon-ceramic electrode and their electroactivity for ethanol oxidation [Volume 5, Issue 1, 2018, Pages 35-47]
Irandoost, Maryam The effect of copper infiltration on LSM Cathode microstructure in high temperature solid oxide fuel cells [Volume 10, Issue 4, 2023, Pages 281-290]
Irankhah, Abdullah Electrophoretic deposition of MnCr2O4 coating for solid oxide fuel cell metallic interconnects [Volume 1, Issue 1, 2014, Pages 21-26]
Irankhah, Abdullah Optimization of Preparation Factors for Cerium Oxide Synthesis as a Support for CO PrOx Catalyst [Volume 1, Issue 3, 2014, Pages 189-197]
Irankhah, Abdullah Effect of platinum on Ceria supported Cu catalysts for PrOx process in fuel processors [Volume 1, Issue 1, 2014, Pages 1-100]
Iranmanesh, Masoud Effect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system [Volume 3, Issue 4, 2016, Pages 301-313]
Iravaninia, Mona Investigation of ion transport and water content properties in anion exchange membranes based on polysulfone for solid alkaline fuel cell application [Volume 2, Issue 1, 2015, Pages 13-25]
Isapour, Zahra Synthesis and characterization of Ag-Y co-doped Mn-Co spinel for solid oxide fuel cell application [Volume 8, Issue 1, 2021, Pages 43-49]
J
Jabbar Farhan Farhan, Arkan Thermo-Economic Analysis of a Geothermal-based Multigeneration System Using the Kalina Cycle for Power, Heating, Cooling, Hydrogen and Freshwater Production [Volume 13, Issue 2, 2026, Pages 137-148]
Jabbari, Amin Additive Manufactured Parts Specifications and Applications in Catalytic Substrates and Fuel Cells [Volume 10, Issue 2, 2023, Pages 173-181]
Jabbari, Zeinab Kinetic study of CO desorption from cathodic electrochemically treated carbon paper supported Pt electrodes [Volume 4, Issue 3, 2017, Pages 201-207]
Jafari, Hadi Investigation of a fuel cell (FC) system for vehicle [Volume 11, Issue 4, 2024, Pages 259-270]
Jafari, Moharram Exergy-Economic analysis of combined cooling, heat and power system utilizing solar energy and biomass [Volume 11, Issue 4, 2024, Pages 271-284]
Jafari, Moharram Enhanced Cooling System Design for Single and Double Pass Condensers: A Comprehensive Technical, Chemical, Economic, and Environmental Feasibility Study [Volume 12, Issue 3, 2025, Pages 181-192]
Jafari, Moharram Numerical Analysis of Key Parameters Influencing the Replacement of a Shell-and-Tube Heat Exchanger with an Automotive Radiator [Volume 13, Issue 1, 2026, Pages 31-38]
Jafari, Moharram Innovative Shell-and-Tube Heat Exchanger Design for Automotive Radiator Replacement: A Novel Approach to Replacing Car Radiators [Volume 12, Issue 4, 2025, Pages 275-284]
Jafarmadar, Samad Analysis and performance evaluation of a multigeneration system applying PV/T and PTC solar collectors from hydrogen and freshwater production point of view [Volume 11, Issue 3, 2024, Pages 205-214]
Jafarmadar, Samad Thermodynamic investigation of a solar-based multigeneration system using Al2O3-Thermonol VP1 nanofluid [Volume 11, Issue 4, 2024, Pages 237-246]
Jafarmadar, Samad Thermoeconomic Analysis of a Solar-Gas Turbine System for Power, Cooling, Hydrogen and Freshwater Production [Volume 12, Issue 4, 2025, Pages 285-296]
Jafarmadar, Samad Thermo-Economic Analysis of a Geothermal-based Multigeneration System Using the Kalina Cycle for Power, Heating, Cooling, Hydrogen and Freshwater Production [Volume 13, Issue 2, 2026, Pages 137-148]
Jahangiri, Mehdi Generating electricity using pico hydro-based power plant in Koohrang county, Iran: effect of energy storage type [Volume 11, Issue 1, 2024, Pages 19-38]
Jahanshahi Javaran, Ebrahim Lattice Boltzmann simulation of water transfer in gas diffusion layers with porosity gradient of polymer electrolyte membrane fuel cells with parallel processing on GPU [Volume 7, Issue 1, 2020, Pages 45-60]
Jahantigh, Nabi Parametric study of the influence of cooling channel dimensions on PEM fuel cell thermal performance [Volume 4, Issue 4, 2017, Pages 265-274]
Jahantigh, Nabi Numerical Analysis of the Effect of Pin Dimensions on the Performance of a Polymer Electrolyte Membrane Fuel Cell Featuring a Honeycomb Pin Flow Field [Volume 13, Issue 1, 2026, Pages 17-30]
Jahantiqh, Narges Optimal Design of a Fractional-Order Controller for Stabilization and Control of DC Microgrids in the Presence of Constant Power and Voltage Loads Using a Grey Wolf Optimization Algorithm [Volume 12, Issue 2, 2025, Pages 89-104]
Jamali, Soolmaz Optimization of Ag loaded TiO2 nanotube arrays for plasmonic photoelectrochemical water splitting [Volume 6, Issue 2, 2019, Pages 133-140]
Jamali Ghahderijani, Mehdi Investigation of vessels pressure effect on PEM electrolyzer performance by using a new OneDimensional Dynamic Model [Volume 2, Issue 4, 2015, Pages 271-281]
Jamshidi, Sona Preparation of Pd composite membrane via organic-inorganic activation method in electroless plating technique [Volume 2, Issue 3, 2015, Pages 151-158]
Jamshidi, Sona Palladium composite membrane with high reversibility of CO2 poisoning [Volume 5, Issue 1, 2018, Pages 13-19]
Jan, Hassan Ahmad Optimization of Renewable Energy and Hydrogen Production for Residential Load in Alberta: A CFD Study [Volume 12, Issue 3, 2025, Pages 149-168]
Janghorban, Ali A New SEPIC-Flyback DC-DC Converter for Fuel Cell Systems [Volume 13, Issue 1, 2026, Pages 55-66]
Javaheri, Masoumeh Using the Palladium as core and Platinum as shell for ORR [Volume 1, Issue 3, 2014, Pages 133-139]
Javanbakht, Mehram Electrochemical Study of Hydrogen Adsorption/Reduction (HAR) Reaction on Graphene Oxide as Electrocatalyst for Proton Exchange Membrane Fuel Cells [Volume 2, Issue 2, 2015, Pages 99-107]
Javanbakht, Mehran Synthesis of Supported Pt Alloy three Dimensional Rhombus Shapes Nanoparticles for Oxygen Reduction Reaction [Volume 2, Issue 2, 2015, Pages 121-130]
Javanbakht, Mehran Preparation and Characterization of Electrocatalyst Nanoparticles for Direct Methanol Fuel Cell Applications Using β-D-glucose as Protection Agent [Volume 4, Issue 1, 2017, Pages 1-11]
Javanbakht, Mehran Kinetic study of CO desorption from cathodic electrochemically treated carbon paper supported Pt electrodes [Volume 4, Issue 3, 2017, Pages 201-207]
Jayachandraiah, B. Thermoexergetic analysis of common rail direct injection diesel engine on optimized multiple injection strategy of performance and emission using congress grass tamarind shell co-pyrolysis oil blend and diesel [Volume 11, Issue 2, 2024, Pages 78-94]
Jelveh, Hussein Reforming Integrated with Oxidation in Micro-Heat Exchanger Reactor with Circular Micro-Channels [Volume 1, Issue 2, 2014, Pages 65-74]
Jokar, Heybatollah Utilization of a Fifth-Order Model for Analyzing Stirling Oscillators [Volume 12, Issue 3, 2025, Pages 169-180]
Jomekian, Abolfazl New Mathematical Modelling and Dynamic Simulation of a Molten Carbonate Fuel Cell [Volume 2, Issue 4, 2015, Pages 241-252]
K
Kadhim Almohammed, Akram QasimA new SEPIC-Zeta bidirectional converter with high efficiency for renewable energy systems [Volume 11, Issue 3, 2024, Pages 142-152]
Kadier, Abudukeremu The significance of key operational variables to the enhancement of hydrogen production in a single-chamber microbial electrolysis cell (MEC) [Volume 2, Issue 2, 2015, Pages 85-97]
Kaflou, Ali Morphological and physical study of Cu-Ni sintered porous wicks used in heat pipes and fuel cells [Volume 3, Issue 4, 2016, Pages 255-266]
Kaflou, Ali Synthesis Zr-Co-Y based chemical getter and evaluation its vacuum preserving, sorption characteristics, and hydrogen absorption [Volume 6, Issue 2, 2019, Pages 171-184]
Kakaei, Karim One –step synthesis of PdCo alloy nanoparticles decorated on reduced grahene oxide as an Electro-catalyst for Oxygen Reduction Reaction in Passive Direct Methanol Fuel Cells [Volume 2, Issue 1, 2015, Pages 27-33]
Kalil, Mohd Sahaid The significance of key operational variables to the enhancement of hydrogen production in a single-chamber microbial electrolysis cell (MEC) [Volume 2, Issue 2, 2015, Pages 85-97]
Kamvar, Majid Comparative Numerical Study of Co- and Counter-Flow Configurations of an All-Porous Solid Oxide Fuel Cell [Volume 8, Issue 2, 2021, Pages 77-93]
Kamvar, Majid Numerical Investigation of a Hydrogen-fuelled Planar AP-SOFC Performance with Special Focus on Safe Operation [Volume 8, Issue 2, 2021, Pages 113-125]
Karami, Zohreh Numerical study on the performance prediction of a proton exchange membrane (PEM) fuel cell [Volume 4, Issue 4, 2017, Pages 249-263]
Karimi Alavijeh, Masih Modeling of Multi-population Microbial Fuel and Electrolysis Cells Based on the Bioanode Potential Conditions [Volume 1, Issue 4, 2014, Pages 247-260]
Karkeabadi, Reza Hydrogen production via steam reforming of LPG on Ni/Zeolite catalysts [Volume 1, Issue 4, 2014, Pages 233-238]
Kashi, Eslam Interaction of atomic hydrogen with monometallic Au(100), Cu(100), Pt(100) surfaces and surface of bimetallic Au@Cu(100), Au@Pt(100) overlayer systems: The role of magnetism [Volume 4, Issue 3, 2017, Pages 209-218]
Kashi, Eslam Process Modeling and Optimization of Coal Gasification for Enhanced Hydrogen and Syngas Yield in Sponge Iron Production [(Articles in Press)]
Kazemi, Namdar Extremely Fast Simulation of the Li--Ion Batteries Governing Equations [Volume 10, Issue 4, 2023, Pages 339-353]
Kazeminasab, Bagher Preparation of Nitrogen-Doped Graphene By Solvothermal Process as Supporting Material for Fuel Cell Catalysts [Volume 1, Issue 2, 2014, Pages 113-119]
Kazerouni, H. Sulfurous Analysis of Bioelectricity Generation from Sulfate-reducing Bacteria (SRB) in a Microbial Fuel Cell [Volume 4, Issue 4, 2017, Pages 307-321]
Kebria, Daryoush Effect of batch vs. continuous mode of operation on microbial desalination cell performance treating municipal wastewater [Volume 3, Issue 4, 2016, Pages 281-290]
Kermani, Mohammad Jafar Performance Improvement of PEM Fuel Cells Using Air Channel Indentation; Part I: Mechanisms to Enrich Oxygen Concentration in Catalyst Layer [Volume 1, Issue 4, 2014, Pages 199-207]
Kermani, Mohammad Jafar Generalization of a CFD Model to Predict the Net Power in PEM Fuel Cells [Volume 6, Issue 1, 2019, Pages 23-37]
Khademi, Azadeh Prediction of Redox Potentials, Electronic Properties, and Spectroscopic Characteristics of Hydrogen Atoms Covalently Bonded to Palladium [Volume 12, Issue 2, 2025, Pages 83-88]
Khajehhaghverdi, Ayda Additive Manufactured Parts Specifications and Applications in Catalytic Substrates and Fuel Cells [Volume 10, Issue 2, 2023, Pages 173-181]
Khalaj, Mohammad Future prospects for solar energy production and storage in Iran [Volume 11, Issue 4, 2024, Pages 247-258]
Khalilarya, Shahram Thermo-Economic Analysis of a Geothermal-based Multigeneration System Using the Kalina Cycle for Power, Heating, Cooling, Hydrogen and Freshwater Production [Volume 13, Issue 2, 2026, Pages 137-148]
Khalilian, Morteza Thermodynamic investigation of applying a thermoelectric generator to produce hydrogen in a multigeneration system [Volume 10, Issue 2, 2023, Pages 131-145]
Khalilian, Morteza Applying geothermal and solar energies for the thermodynamic estimation of the multigeneration system’s performance in producing power, freshwater and hydrogen [Volume 11, Issue 3, 2024, Pages 179-188]
Khalilian, Morteza Thermodynamic and Thermoeconomic Analysis of a Multigeneration System Using Solar and Geothermal Energies [Volume 12, Issue 1, 2025, Pages 19-30]
Khalilian, Morteza Energy and Exergy Investigation of a Multigeneration System Based on Solar and Geothermal Energy Sources [Volume 12, Issue 3, 2025, Pages 193-202]
Khalilian, Morteza Parametric Study of an ORC-EJR Cycle Based on Energy and Exergy Analysis for Power, Heating, Cooling, and Hydrogen Production [Volume 12, Issue 2, 2025, Pages 75-82]
Khalilian, Morteza Studying the Waste Heat Recovery of a Gas Turbine Cycle from a Thermodynamic Perspective [Volume 12, Issue 2, 2025, Pages 127-134]
Khalilian, Morteza Thermoeconomic Study of a Multigeneration System with Waste Heat Recovery from a Gas Turbine [Volume 12, Issue 4, 2025, Pages 265-274]
Khalilian, Morteza 4E analysis of a geothermal-based multigeneration system [(Articles in Press)]
Khalilian, Morteza The Effect of Using an ETC Collector on Increasing the Geothermal Fluid Temperature in a Multigeneration System [Volume 13, Issue 1, 2026, Pages 67-74]
Khalilian, Morteza Thermodynamic Analysis of a Combined Solar and Geothermal Cycle for Hydrogen and Freshwater Production [Volume 12, Issue 4, 2025, Pages 243-252]
Khalilian, Morteza A solar-assisted NGCC-based multigeneration system with LNG cold-exergy recovery and hydrogen production: Thermodynamic, exergoeconomic, and environmental analysis [(Articles in Press)]
Khalilian, Morteza Exergy and energy analysis of a combined cooling, heat, hydrogen and power generation system utilizing geothermal energy [(Articles in Press)]
Khan, Liaquat AliInvestigating the Effects of Operating Parameters on Hydroxy Gas Production through Solar-Powered Alkaline Water Electrolysis: a COMSOL Simulation and Experimental Approach [Volume 12, Issue 1, 2025, Pages 9-18]
Khandan, Nahid Hydrogen production via steam reforming of LPG on Ni/Zeolite catalysts [Volume 1, Issue 4, 2014, Pages 233-238]
Khandan, Nahid Optimization of the preparation procedure of Ni/Al2O3 catalyst for steam reforming of n-butane [Volume 2, Issue 3, 2015, Pages 139-149]
Khandan, Nahid Methanol steam reforming; Effects of various metal oxides on the properties of a Cu-based catalyst [Volume 3, Issue 4, 2016, Pages 291-299]
Khandan, Nahid Enhancing the CO tolerance of Pt/C as PEM fuel cell anode catalyst by modifying the catalyst synthesis method [Volume 6, Issue 1, 2019, Pages 71-81]
Khebri, Vahid Investigation of carbon dioxide capture from hydrogen using the thermal pressure swing adsorption process: Central composite design modeling [Volume 4, Issue 1, 2017, Pages 13-26]
Kheirmand, Mehdi Oxygen reduction reaction on Pt/C at the presence of super paramagnetic of Fe3O4 nanoparticles for PEMFCs [Volume 1, Issue 1, 2014, Pages 41-46]
Kheirmand, Mehdi Single walled carbon nanotube in the reaction layer of gas diffusion electrode for oxygen reduction reaction [Volume 1, Issue 2, 2014, Pages 75-82]
Kheirmand, Mehdi Electrodeposition of platinum nanoparticles on reduced graphene oxide as an efficient catalyst for oxygen reduction reaction [Volume 2, Issue 1, 2015, Pages 7-12]
Kheirmand, Mehdi Palladium nanoparticles supported on carbon black powder as an effective anodic catalyst for application in a direct glucose alkaline fuel cell [Volume 3, Issue 1, 2016, Pages 11-17]
Kheirmand, Mehdi Effect of Solution Dielectric Constant on the Preparation of Gas Diffusion Electrode Reaction Layer for the Oxygen Reduction Reaction [Volume 10, Issue 2, 2023, Pages 97-109]
Kheirmand, Mehdi Evaluation of electrocatalytic performance of PtCo/C nanoparticles in different proportions of cobalt for oxygen reduction reaction [Volume 10, Issue 4, 2023, Pages 291-297]
Kheirmand, Mehdi Metal‐organic framework‐derived Cu@Co4N nanoparticles anchored on N-doped carbon nanotubes for efficient and stable ORR activity [Volume 10, Issue 4, 2023, Pages 327-337]
Kheirmand, Mehdi Chemical kinetics analysis of a zinc-air fuel cell [Volume 11, Issue 1, 2024, Pages 39-45]
Kheirmand, Mehdi Lithium-oxygen charge transfer interaction: a deformation density analysis study [Volume 11, Issue 2, 2024, Pages 117-122]
Kheirmand, Mehdi Prediction of Redox Potentials, Electronic Properties, and Spectroscopic Characteristics of Hydrogen Atoms Covalently Bonded to Palladium [Volume 12, Issue 2, 2025, Pages 83-88]
Kheirmand, Mehdi Boosting Mg-Air Battery Efficiency with Polyaniline-Coated Anodes [Volume 13, Issue 2, 2026, Pages 125-136]
Kheradmandinia, Shaker Enhancing the CO tolerance of Pt/C as PEM fuel cell anode catalyst by modifying the catalyst synthesis method [Volume 6, Issue 1, 2019, Pages 71-81]
KhodadyKoochacsaraiy, Raheleh Mechanical behavior of metal hydrides and hydrogen storage containers: A review [Volume 10, Issue 3, 2023, Pages 257-278]
Khodaei, Milad Modeling and simulation of the fluid dynamic and performance of the Pd-based membrane by CFD for hydrogen separation [Volume 9, Issue 1, 2022, Pages 19-25]
Khorshidian, M A review of the main mechanisms of catalyst layer degradation in polymer electrolyte membrane fuel cell (PEMFC) and different performance recovery methods [Volume 6, Issue 2, 2019, Pages 91-115]
Khorshidian, Majid Electrochemical Impedance Spectroscopy for Investigation of Different Losses in 4-cells Short Stack with Integrated Humidifier and Water Separator [Volume 3, Issue 2, 2016, Pages 127-136]
Khorshidian, Majid Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization [Volume 3, Issue 3, 2016, Pages 183-197]
Khorshidian, Majid Design and Analysis of an Innovative Dead-end Cascade-type PEMFC Stack at Different Orientations [Volume 7, Issue 1, 2020, Pages 81-96]
Khorshidian, Majid Quantitative study of water level control system in PEM fuel cell separator for conservation of reactant gases [Volume 8, Issue 1, 2021, Pages 1-12]
Kirkgecit, Rabia Synthesis and Characterization of Co-doped CeO2 Ceramic Electrolyte for IT-SOFC [Volume 6, Issue 2, 2019, Pages 163-170]
Kiyani, Roya Multi-walled carbon nanotubes supported palladium nanoparticles: Synthesis, characterization and catalytic activity towards methanol electro oxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 67-74]
Kojoury-Naftchali, Mostafa High Step-Up Converter with Low Voltage Stress for Fuel Cell Applications [Volume 9, Issue 2, 2022, Pages 117-132]
Kompany, Ahmad Study the stability of Si, Ge, Fe and Co in the interior surface of metallic carbon nanotube for hydrogen storage [Volume 2, Issue 3, 2015, Pages 197-205]
Koosha, Morteza Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]
Kord Firuzjaei, Vahid Simulation of integrated purification systems for hydrogen production in methanol steam reforming process [Volume 10, Issue 3, 2023, Pages 158-199]
Kouzegar, Zahra Preparation of Pd composite membrane via organic-inorganic activation method in electroless plating technique [Volume 2, Issue 3, 2015, Pages 151-158]
L
Logrono, Washington The significance of key operational variables to the enhancement of hydrogen production in a single-chamber microbial electrolysis cell (MEC) [Volume 2, Issue 2, 2015, Pages 85-97]
Lohrasbi, Elaheh Synthesis of Supported Pt Alloy three Dimensional Rhombus Shapes Nanoparticles for Oxygen Reduction Reaction [Volume 2, Issue 2, 2015, Pages 121-130]
Lohrasbi, Elaheh Effect of Solution Dielectric Constant on the Preparation of Gas Diffusion Electrode Reaction Layer for the Oxygen Reduction Reaction [Volume 10, Issue 2, 2023, Pages 97-109]
M
Madani, Seyed Hesameddin Nonlinear Hopf Bifurcation Analysis for Predicting Stable Limit Cycles in Solar Stirling Thermal Oscillators [(Articles in Press)]
Madram, Ali Reza Effect of temperature on kinetics of the hydrogen evolution reaction on Ni-P-C cathodes in alkaline solution [Volume 1, Issue 4, 2014, Pages 215-222]
Madram, Ali Reza Application of Pd-Substituted Ni-Al Layered Double Hydroxides for the Hydrogen Evolution Reaction [Volume 2, Issue 4, 2015, Pages 253-261]
Madram, Ali Reza In situ activation of a Ni catalyst with Mo ion for hydrogen evolution reaction in alkaline solution [Volume 3, Issue 2, 2016, Pages 151-158]
Madram, Ali Reza A high performance lithium-ion battery using LiNa0.02K0.01FePO4/C as cathode material and anatase TiO2 nanotube arrays as anode material [Volume 4, Issue 1, 2017, Pages 27-35]
Madram, Ali Reza Preparation of Ni-P-CeO2 electrode and study on electrocatalytic properties for hydrogen evolution reaction [Volume 5, Issue 1, 2018, Pages 1-11]
Madram, Ali Reza Kinetics study of hydrogen evolution reaction on a high porous three dimensional NiPC alloy [Volume 8, Issue 2, 2021, Pages 95-101]
Mafi, Mostafa Proposing a Hydrogen Liquefaction Cycle for Geothermal Energy Storage in an Innovative Multi-Generation System [Volume 12, Issue 1, 2025, Pages 1-8]
Maghsoudi, Karim Parametric study of a membrane energy exchanger based on energy, entropy, and exergy analysis for proton exchange membrane fuel cell application [Volume 11, Issue 3, 2024, Pages 153-168]
Maghsoudipour, Amir Electrophoretic deposition of MnCr2O4 coating for solid oxide fuel cell metallic interconnects [Volume 1, Issue 1, 2014, Pages 21-26]
Maghsoudipour, Amir Co3O4 spinel protection coating for solid oxide fuel cell interconnect application [Volume 1, Issue 2, 2014, Pages 121-131]
Mahmood, Faizal Theoretical study of the effect of hydrogen addition to natural gas-fueled direct-injection engines [Volume 1, Issue 1, 2014, Pages 11-20]
Mahmoodi, Farshid Transient Three-dimensional Simulation of a Metal Hydride Hydrogen Storage Tank Interconnected to a PEM Fuel Cell by Heat Pipes [Volume 6, Issue 2, 2019, Pages 117-132]
Mahmood Mejbel Ghrairi, Shakir Thermodynamic and Thermoeconomic Analysis of a Multigeneration System Using Solar and Geothermal Energies [Volume 12, Issue 1, 2025, Pages 19-30]
Mahmoudi, Mehrdad Thermodynamic investigation of applying a thermoelectric generator to produce hydrogen in a multigeneration system [Volume 10, Issue 2, 2023, Pages 131-145]
Mahmoudi Najafi, Seyed Heydar Highly Ordered Nanoporous β-Ni(OH)2 Nanobelt Array Architectures as Electrode Material for Electrochemical Capacitors: Design, Synthesis, Characterization and Supercapacitive Evaluation [Volume 10, Issue 2, 2023, Pages 157-171]
Maleki, Reza Machine Learning Assisted Prediction and Analysis of Future Lithium Prices [(Articles in Press)]
Malek Khachatourian, Adrine Synthesis and characterization of Ag-Y co-doped Mn-Co spinel for solid oxide fuel cell application [Volume 8, Issue 1, 2021, Pages 43-49]
Malek Khachatourian, Adrine Synthesis and electrochemical properties of Sr3Fe1.8Co0.2O7 as a solid oxide fuel cell cathode [Volume 8, Issue 1, 2021, Pages 51-58]
Mammar, Khaled Development and Simulation of a PEM Fuel Cell model for Prediction of Water Content and Power Generation [Volume 4, Issue 4, 2017, Pages 289-299]
Mansouri, Seyed Hossein The Impact of Wettability on Effective Properties of Cathode Catalyst Layer in a Proton Exchange Membrane Fuel Cell [Volume 3, Issue 3, 2016, Pages 233-245]
Marashi, Pirooz The effect of copper infiltration on LSM Cathode microstructure in high temperature solid oxide fuel cells [Volume 10, Issue 4, 2023, Pages 281-290]
Mardanpour, Mohammad Mahdi Modeling of Multi-population Microbial Fuel and Electrolysis Cells Based on the Bioanode Potential Conditions [Volume 1, Issue 4, 2014, Pages 247-260]
Mardanpour, Mohammad Mahdi A comparative study of three types of anode electrodes in a microfluidic microbial fuel cell [Volume 8, Issue 1, 2021, Pages 13-21]
Maroufi, Arman Performance Analysis and Working Fluids Selection of Organic Rankine Cycle in a Triple Power Generation System Combined with Gas Turbine and Solid Oxide Fuel Cell Cycles [Volume 10, Issue 1, 2023, Pages 11-32]
Masrori Saadat, Seyed Hossein Electrochemical Impedance Spectroscopy for Investigation of Different Losses in 4-cells Short Stack with Integrated Humidifier and Water Separator [Volume 3, Issue 2, 2016, Pages 127-136]
Masrori Saadat, Seyed Hossein Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization [Volume 3, Issue 3, 2016, Pages 183-197]
Mazloum-Ardakani, Mohammad Facile hydrothermal synthesis and electrochemical investigation of a free-standing cobalt oxide hierarchical nanostructure electrode on a porous carbon structure as an efficient supercapacitor [Volume 11, Issue 2, 2024, Pages 123-130]
Mehrabian, Mozafar Ali Modeling heat and mass transfer in laminar forced flow between parallel plates channel imposed to suction or injection [Volume 2, Issue 1, 2015, Pages 35-46]
Mehrabinejad, Kolsoom Evaluation of electrocatalytic performance of PtCo/C nanoparticles in different proportions of cobalt for oxygen reduction reaction [Volume 10, Issue 4, 2023, Pages 291-297]
Mehranjani, Alireza Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]
Meshkani, Fereshteh Effect of K2O on the catalytic performance of Ni catalysts supported on nanocrystalline Al2O3 in CO2 reforming of methane [Volume 2, Issue 4, 2015, Pages 215-226]
Meshkani, Fereshteh A comparative study on the kinetics of carbon dioxide methanation over bimetallic and monometallic catalysts [Volume 3, Issue 1, 2016, Pages 59-71]
Meshkani, Fereshteh Investigation of the catalytic performance and coke formation of nanocrystalline Ni/SrO-Al2O3 catalyst in dry reforming of methane [Volume 3, Issue 4, 2016, Pages 315-322]
Mirbozorgi, Seyed Ali Lattice Boltzmann simulation of water transfer in gas diffusion layers with porosity gradient of polymer electrolyte membrane fuel cells with parallel processing on GPU [Volume 7, Issue 1, 2020, Pages 45-60]
Miri Jahromi, Ahmad Machine Learning Assisted Prediction and Analysis of Future Lithium Prices [(Articles in Press)]
Mirtalaei, Sayyed Mohammad Mehdi Small signal stability analysis and frequency control in a single-area multi-source electrical energy system [Volume 11, Issue 2, 2024, Pages 107-116]
Mirzaee, Iraj Thermodynamic evaluation of a novel geothermal and solar-driven multigeneration system for hydrogen and freshwater production [Volume 10, Issue 1, 2023, Pages 51-67]
Mirzaee, Iraj Thermodynamic investigation of applying a thermoelectric generator to produce hydrogen in a multigeneration system [Volume 10, Issue 2, 2023, Pages 131-145]
Mirzaee, Iraj Applying geothermal and solar energies for the thermodynamic estimation of the multigeneration system’s performance in producing power, freshwater and hydrogen [Volume 11, Issue 3, 2024, Pages 179-188]
Mirzaee, Iraj Thermodynamic investigation of a solar-based multigeneration system using Al2O3-Thermonol VP1 nanofluid [Volume 11, Issue 4, 2024, Pages 237-246]
Mirzaee, Iraj Thermodynamic and Thermoeconomic Analysis of a Multigeneration System Using Solar and Geothermal Energies [Volume 12, Issue 1, 2025, Pages 19-30]
Mirzaee, Iraj Energy and Exergy Investigation of a Multigeneration System Based on Solar and Geothermal Energy Sources [Volume 12, Issue 3, 2025, Pages 193-202]
Mirzaee, Iraj Hydrogen production capacity of a system based on geothermal energy and thermoelectric generator [(Articles in Press)]
Mirzaee, Iraj Parametric Study of an ORC-EJR Cycle Based on Energy and Exergy Analysis for Power, Heating, Cooling, and Hydrogen Production [Volume 12, Issue 2, 2025, Pages 75-82]
Mirzaee, Iraj Energy, exergy and economic analysis of studying a biomass-based multigeneration system for power, heating, hydrogen and freshwater production [(Articles in Press)]
Mirzaee, Iraj The Effect of Using an ETC Collector on Increasing the Geothermal Fluid Temperature in a Multigeneration System [Volume 13, Issue 1, 2026, Pages 67-74]
Mirzaee, Iraj Thermodynamic Analysis of a Combined Solar and Geothermal Cycle for Hydrogen and Freshwater Production [Volume 12, Issue 4, 2025, Pages 243-252]
Mirzaee, Iraj Thermoeconomic Analysis of a Solar-Gas Turbine System for Power, Cooling, Hydrogen and Freshwater Production [Volume 12, Issue 4, 2025, Pages 285-296]
Mirzaee, Iraj Exergy and energy analysis of a combined cooling, heat, hydrogen and power generation system utilizing geothermal energy [(Articles in Press)]
Mirzaee, Iraj Energetic and Exergetic Analysis of a Geothermal Energy System for Multigeneration Applications: A Thermodynamic Perspective [Volume 13, Issue 2, 2026, Pages 75-82]
Moayeri, Mona Morphological and physical study of Cu-Ni sintered porous wicks used in heat pipes and fuel cells [Volume 3, Issue 4, 2016, Pages 255-266]
Moazemi Goudarzi, Ali Mechanical behavior of metal hydrides and hydrogen storage containers: A review [Volume 10, Issue 3, 2023, Pages 257-278]
Moazzami, Majid Analysis and Simulation of the Effect of Combining Load Frequency Control and Automatic Voltage Regulation in Hydrothermal Power System [Volume 13, Issue 1, 2026, Pages 39-54]
Mobini, Amir Hydrogen Utilization in Free Piston Engines: A Performance Investigation [Volume 12, Issue 1, 2025, Pages 31-44]
Mobini, Amir Utilization of a Fifth-Order Model for Analyzing Stirling Oscillators [Volume 12, Issue 3, 2025, Pages 169-180]
Mohammad Ebrahimi, Iman Three-dimensional modeling of transport phenomena in a planar anode-supported solid oxide fuel cell [Volume 4, Issue 1, 2017, Pages 37-52]
Mohammadi, Kamal Developed endplate geometry for uniform contact pressure distribution over PEMFC active area [Volume 7, Issue 1, 2020, Pages 1-12]
Mohammadi, Kamal Mechanical and chemical characteristics of the PEM fuel cell sealants in simulated environment [Volume 9, Issue 2, 2022, Pages 163-178]
Mohammadi, Kamal Study of Contact Pressure Distribution over MEA of the Three-Cell PEMFC with Metallic Bipolar Plates [Volume 10, Issue 1, 2023, Pages 69-79]
Mohammadi, Kyana Optimization of Ag loaded TiO2 nanotube arrays for plasmonic photoelectrochemical water splitting [Volume 6, Issue 2, 2019, Pages 133-140]
Mohammadi*, Mohammad MahdiExperimental study and numerical modeling of vibrational characteristics of a 500W PEM fuel cell stack [Volume 9, Issue 1, 2022, Pages 39-52]
Mohammadi-Ahmar, Akbar Numerical analysis of reactant transport in the novel tubular polymer electrolyte membrane fuel cells [Volume 2, Issue 3, 2015, Pages 181-196]
Mohammadkhani, Farzad Thermodynamic and Thermoeconomic Analysis of the Use of Wind and Solar Energy to Supply the Energy Requirements of a Multigeneration System [Volume 13, Issue 2, 2026, Pages 167-186]
Mohammadpoor, H Sulfurous Analysis of Bioelectricity Generation from Sulfate-reducing Bacteria (SRB) in a Microbial Fuel Cell [Volume 4, Issue 4, 2017, Pages 307-321]
Mohammadpour Mir, Amirhossein Fuel Cell Power System Conceptual Design for Unmanned Underwater Vehicle [Volume 10, Issue 1, 2023, Pages 33-50]
Mohammadzadeh, Vahid Comparison of waste heat recovery from a Proton Exchange Membrane fuel cell by gas turbine or Organic Rankin Cycle: a display of 3E analysis [Volume 8, Issue 2, 2021, Pages 103-112]
Mohammed, Falah Hasan Mohammed Studying the Waste Heat Recovery of a Gas Turbine Cycle from a Thermodynamic Perspective [Volume 12, Issue 2, 2025, Pages 127-134]
Mohammed, Falah Hasan Mohammed Thermoeconomic Study of a Multigeneration System with Waste Heat Recovery from a Gas Turbine [Volume 12, Issue 4, 2025, Pages 265-274]
Mohammed Qasim, Hayder Analysis and implementation of high step-up SEPIC converter without coupled inductor for high voltage applications [Volume 10, Issue 3, 2023, Pages 201-213]
Mohebbi, Mehdi Preparation of Ni-P-CeO2 electrode and study on electrocatalytic properties for hydrogen evolution reaction [Volume 5, Issue 1, 2018, Pages 1-11]
Mohebbi-Kalhori, Davod Implementation of Chitosan modified ultrafiltration hollow fiber as proton exchange membrane of ml-scale microbial fuel cells [Volume 10, Issue 4, 2023, Pages 299-310]
Mohebbi-Kalhori, Davood Numerical investigation of methanol crossover through the membrane in a direct methanol fuel cell [Volume 5, Issue 1, 2018, Pages 21-33]
Mohebi, Hamed Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]
Molaahmad, Abolfazl Synthesis and characterization of nanostructured Cux (Mn1.5-x/2Co1.5-x/2)O4 as an interconnect coating for solid oxide fuel cell [Volume 8, Issue 1, 2021, Pages 35-41]
Momeni, Mohammad Evaluation of EPDM Elastomeric Seals for Application in Polymer Electrolyte Membrane Fuel Cells [Volume 12, Issue 4, 2025, Pages 253-264]
Momenifar, Mohammad Developed endplate geometry for uniform contact pressure distribution over PEMFC active area [Volume 7, Issue 1, 2020, Pages 1-12]
Momenifar, Mohammad Mechanical and chemical characteristics of the PEM fuel cell sealants in simulated environment [Volume 9, Issue 2, 2022, Pages 163-178]
Momenifar, Mohammad Study of Contact Pressure Distribution over MEA of the Three-Cell PEMFC with Metallic Bipolar Plates [Volume 10, Issue 1, 2023, Pages 69-79]
Mongashti, Zahra Lithium-oxygen charge transfer interaction: a deformation density analysis study [Volume 11, Issue 2, 2024, Pages 117-122]
Moosazadeh, hamid Experimental study and numerical modeling of vibrational characteristics of a 500W PEM fuel cell stack [Volume 9, Issue 1, 2022, Pages 39-52]
Moradian, Mohammadreza A sensorless adaptive non-linear control scheme for minimizing the stator energy losses of IPMSM [Volume 11, Issue 2, 2024, Pages 131-141]
Moradian, Mohammadreza Simulation of the Dynamic Behavior of the Load Frequency Control System in the Power Network by Combining Different Power Plant [Volume 12, Issue 3, 2025, Pages 203-216]
Morshedsolouk, Fattaneh Mechanical behavior of metal hydrides and hydrogen storage containers: A review [Volume 10, Issue 3, 2023, Pages 257-278]
Moshaii, Ahmad Optimization of Ag loaded TiO2 nanotube arrays for plasmonic photoelectrochemical water splitting [Volume 6, Issue 2, 2019, Pages 133-140]
Mostafaeipour, Ali Generating electricity using pico hydro-based power plant in Koohrang county, Iran: effect of energy storage type [Volume 11, Issue 1, 2024, Pages 19-38]
Mostafavi, Ebrahim La0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study [Volume 1, Issue 4, 2014, Pages 239-246]
Motavalli Sofiani, Shakila Proposing a Hydrogen Liquefaction Cycle for Geothermal Energy Storage in an Innovative Multi-Generation System [Volume 12, Issue 1, 2025, Pages 1-8]
Mozaffari, Sayed Ahmad Synthesis of Supported Pt Alloy three Dimensional Rhombus Shapes Nanoparticles for Oxygen Reduction Reaction [Volume 2, Issue 2, 2015, Pages 121-130]
Mozaffari, Sayed Ahmad Highly Ordered Nanoporous β-Ni(OH)2 Nanobelt Array Architectures as Electrode Material for Electrochemical Capacitors: Design, Synthesis, Characterization and Supercapacitive Evaluation [Volume 10, Issue 2, 2023, Pages 157-171]
Murthy, T. Sreenivasa Thermoexergetic analysis of common rail direct injection diesel engine on optimized multiple injection strategy of performance and emission using congress grass tamarind shell co-pyrolysis oil blend and diesel [Volume 11, Issue 2, 2024, Pages 78-94]
N
Najafpour, Ghasem Effect of batch vs. continuous mode of operation on microbial desalination cell performance treating municipal wastewater [Volume 3, Issue 4, 2016, Pages 281-290]
Najar-Khodabakhsh, Abbas A sensorless adaptive non-linear control scheme for minimizing the stator energy losses of IPMSM [Volume 11, Issue 2, 2024, Pages 131-141]
Naji, Leila Electrochemical Study of Hydrogen Adsorption/Reduction (HAR) Reaction on Graphene Oxide as Electrocatalyst for Proton Exchange Membrane Fuel Cells [Volume 2, Issue 2, 2015, Pages 99-107]
Nasiri, Mohammad The effect of solvent of titanium precursor in the sol-gel process on the activity of TiO2 nanoparticles for H2 production [Volume 4, Issue 2, 2017, Pages 139-151]
Nasiri, Mohammad Preparation of Ni-P-CeO2 electrode and study on electrocatalytic properties for hydrogen evolution reaction [Volume 5, Issue 1, 2018, Pages 1-11]
Nassernejad, Bahram Kinetic study of CO desorption from cathodic electrochemically treated carbon paper supported Pt electrodes [Volume 4, Issue 3, 2017, Pages 201-207]
Nemati, Ali Synthesis and electrochemical properties of Sr3Fe1.8Co0.2O7 as a solid oxide fuel cell cathode [Volume 8, Issue 1, 2021, Pages 51-58]
Niknejad, Shahriar Hydrogen Utilization in Free Piston Engines: A Performance Investigation [Volume 12, Issue 1, 2025, Pages 31-44]
Niknejad, Shahriar Utilization of a Fifth-Order Model for Analyzing Stirling Oscillators [Volume 12, Issue 3, 2025, Pages 169-180]
Norouzi, Nima Exergy and Energy Analysis of Effective Utilization of Carbon Dioxide in the Gas-to-Methanol Process [Volume 7, Issue 1, 2020, Pages 13-31]
Norouzi, Zahra Highly Ordered Nanoporous β-Ni(OH)2 Nanobelt Array Architectures as Electrode Material for Electrochemical Capacitors: Design, Synthesis, Characterization and Supercapacitive Evaluation [Volume 10, Issue 2, 2023, Pages 157-171]
Nourouzi, Salman Investigation and optimization of a PEM fuel cell’s electrical and mechanical behavior [Volume 3, Issue 1, 2016, Pages 1-10]
Nourouzi, Salman Finite Element Simulation and ANFIS Prediction of Dimensional Error Effect on distribution of BPP/GDL Contact Pressure in PEM Fuel Cell [Volume 4, Issue 2, 2017, Pages 125-138]
Nozad Golikand, Ahmad Single walled carbon nanotube in the reaction layer of gas diffusion electrode for oxygen reduction reaction [Volume 1, Issue 2, 2014, Pages 75-82]
O
Olyaee, Saeed Modeling of measurement error in refractive index determination of fuel cell using neural network and genetic algorithm [Volume 1, Issue 2, 2014, Pages 95-104]
Omidbakhsh Amiri, Elham Reforming Integrated with Oxidation in Micro-Heat Exchanger Reactor with Circular Micro-Channels [Volume 1, Issue 2, 2014, Pages 65-74]
Omidbakhsh Amiri, Elham Steam Reforming Integrated with Oxidation of Methanol in a Micro-Channel Reactor with Different Micro-Baffle Shapes [Volume 2, Issue 2, 2015, Pages 75-83]
Omidifar, Mina Modeling and simulation of the fluid dynamic and performance of the Pd-based membrane by CFD for hydrogen separation [Volume 9, Issue 1, 2022, Pages 19-25]
Omidifar, Mina Feasibility of Fabricating a Defect-Free Nickel Composite Membrane Using the Organic-Inorganic Activation Technique [Volume 13, Issue 2, 2026, Pages 113-124]
Ommi, Fathollah Investigation of vessels pressure effect on PEM electrolyzer performance by using a new OneDimensional Dynamic Model [Volume 2, Issue 4, 2015, Pages 271-281]
Ommi, Fathollah Comparison of waste heat recovery from a Proton Exchange Membrane fuel cell by gas turbine or Organic Rankin Cycle: a display of 3E analysis [Volume 8, Issue 2, 2021, Pages 103-112]
Osanloo, Behzad Numerical analysis of reactant transport in the novel tubular polymer electrolyte membrane fuel cells [Volume 2, Issue 3, 2015, Pages 181-196]
Ozgoli, Hassanali A Double Pipe Heat Exchanger Design and Optimization for Cooling an Alkaline Fuel Cell System [Volume 1, Issue 4, 2014, Pages 223-231]
Ozgoli, Hassan Ali Energy Price Analysis of a Biomass Gasification-Solid Oxide Fuel Cell-Gas Turbine Power Plant [Volume 3, Issue 1, 2016, Pages 45-58]
Ozgoli, Hassan Ali Exergy Analysis of a Molten Carbonate Fuel Cell-Turbo Expander-Steam Turbine Hybrid Cycle [Volume 3, Issue 4, 2016, Pages 267-279]
Ozgoli, Hassan Ali Integration of a Vanadium Redox Flow Battery with a Proton Exchange Membrane Fuel Cell as an Energy Storage System [Volume 4, Issue 1, 2017, Pages 53-68]
Ozgoli, Hassan Ali Simulation of a Solid Oxide Fuel Cell with External Steam Methane Reforming and Bypass [Volume 4, Issue 2, 2017, Pages 103-118]
P
Pahnabi, Amirhossein High Step-Up Converter with Low Voltage Stress for Fuel Cell Applications [Volume 9, Issue 2, 2022, Pages 117-132]
Pahnabi, Amirhossein Experimental Investigation of a High Efficiency Power Path Controller for PEM Fuel Cell and Battery Hybrid System [Volume 9, Issue 2, 2022, Pages 149-161]
Parnian, Mohammad Javad Preparation of Nitrogen-Doped Graphene By Solvothermal Process as Supporting Material for Fuel Cell Catalysts [Volume 1, Issue 2, 2014, Pages 113-119]
Parnian, Mohammad Javad Multi-walled carbon nanotubes supported palladium nanoparticles: Synthesis, characterization and catalytic activity towards methanol electro oxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 67-74]
Parnian, Mohammad Javad Studies on the SPEEK membrane with low degree of sulfonation as a stable proton exchange membrane for fuel cell applications [Volume 3, Issue 3, 2016, Pages 221-232]
Pashaie, Pouya Finite Element Simulation and ANFIS Prediction of Dimensional Error Effect on distribution of BPP/GDL Contact Pressure in PEM Fuel Cell [Volume 4, Issue 2, 2017, Pages 125-138]
Pashaie, Pouya Evaluation of EPDM Elastomeric Seals for Application in Polymer Electrolyte Membrane Fuel Cells [Volume 12, Issue 4, 2025, Pages 253-264]
Paydar, Mohammad HosseinSynthesis and investigation on microstructure and electrical conductivity of Ruddlesden-Popper phase, La1.9Sr0.1Ni0.7Cu0.3O4 (LSNC), as cathode material for intermediate temperature solid oxide fuel cells [Volume 8, Issue 2, 2021, Pages 69-76]
Paydar, Sara Synthesis and investigation on microstructure and electrical conductivity of Ruddlesden-Popper phase, La1.9Sr0.1Ni0.7Cu0.3O4 (LSNC), as cathode material for intermediate temperature solid oxide fuel cells [Volume 8, Issue 2, 2021, Pages 69-76]
Penhani, Hossein Performance Analysis and Working Fluids Selection of Organic Rankine Cycle in a Triple Power Generation System Combined with Gas Turbine and Solid Oxide Fuel Cell Cycles [Volume 10, Issue 1, 2023, Pages 11-32]
Pesteei, Seyed Mehdi Analysis and performance evaluation of a multigeneration system applying PV/T and PTC solar collectors from hydrogen and freshwater production point of view [Volume 11, Issue 3, 2024, Pages 205-214]
Pirkandi, Jamasb Performance Analysis and Working Fluids Selection of Organic Rankine Cycle in a Triple Power Generation System Combined with Gas Turbine and Solid Oxide Fuel Cell Cycles [Volume 10, Issue 1, 2023, Pages 11-32]
Pirkandi, Jamasb Thermo-Economic Analysis of Triple Production System, Combination with Solid Oxide Fuel Cell and Absorption Chiller [Volume 12, Issue 1, 2025, Pages 59-74]
Pishvaie, Mahmoud RezaNew Mathematical Modelling and Dynamic Simulation of a Molten Carbonate Fuel Cell [Volume 2, Issue 4, 2015, Pages 241-252]
Poolaei Moziraji, Zahra Thermo-Economic Analysis of Triple Production System, Combination with Solid Oxide Fuel Cell and Absorption Chiller [Volume 12, Issue 1, 2025, Pages 59-74]
Poorshakoor, Ehsan Optimum calcination temperature for the synthesis of nanostructured alumina for energy storage heat management applications [Volume 11, Issue 1, 2024, Pages 8-18]
Porhemmat, Zahra Mechanistic approach developed to estimation of exchange current density and charge transfer coefficient in lead acid batteries [Volume 11, Issue 1, 2024, Pages 68-77]
Pourarian, Faiz "Physical properties and electronic structure of LaNi5 compound before and after hydrogenation: An experimental and theoretical approach" [Volume 1, Issue 1, 2014, Pages 27-39]
Pourarian, Faiz Synthesis, characterization and hydrogen storage properties of Mm(Ni,Co,Mn,Al)5 alloy [Volume 1, Issue 2, 2014, Pages 83-94]
Pourarian, Faiz Density Functional Studies on Crystal Structure and electronic properties of Potassium Alanate as a candidate for Hydrogen storage [Volume 2, Issue 3, 2015, Pages 169-179]
Pouretedal, Hamid Reza Effect of temperature on kinetics of the hydrogen evolution reaction on Ni-P-C cathodes in alkaline solution [Volume 1, Issue 4, 2014, Pages 215-222]
Pouretedal, Hamid Reza The effect of solvent of titanium precursor in the sol-gel process on the activity of TiO2 nanoparticles for H2 production [Volume 4, Issue 2, 2017, Pages 139-151]
Pourmahmoud, Nader The simulation of novel annular shape on the Performance in Proton Exchange Membrane Fuel Cell [Volume 1, Issue 3, 2014, Pages 175-188]
Pourmahmoud, Nader Modeling and simulation of a new architecure stack applied on the PEM Fuel Cell [Volume 3, Issue 2, 2016, Pages 99-112]
Pourmahmoud, Nader Energy, exergy and economic analysis of studying a biomass-based multigeneration system for power, heating, hydrogen and freshwater production [(Articles in Press)]
Pourmahmoud, Nader Thermoeconomic Analysis of a Solar-Gas Turbine System for Power, Cooling, Hydrogen and Freshwater Production [Volume 12, Issue 4, 2025, Pages 285-296]
Prasad, B. Durga Thermoexergetic analysis of common rail direct injection diesel engine on optimized multiple injection strategy of performance and emission using congress grass tamarind shell co-pyrolysis oil blend and diesel [Volume 11, Issue 2, 2024, Pages 78-94]
R
Raeisi, Heidar Ali Generating electricity using pico hydro-based power plant in Koohrang county, Iran: effect of energy storage type [Volume 11, Issue 1, 2024, Pages 19-38]
Rahgoshay, Majid Experimental Study of Oxidant Effect on Lifetime of PEM Fuel Cell [Volume 7, Issue 1, 2020, Pages 33-43]
Rahgoshay, Majid Design and Analysis of an Innovative Dead-end Cascade-type PEMFC Stack at Different Orientations [Volume 7, Issue 1, 2020, Pages 81-96]
Rahgoshay, Majid Quantitative study of water level control system in PEM fuel cell separator for conservation of reactant gases [Volume 8, Issue 1, 2021, Pages 1-12]
Rahgoshay, Seyed Majid Electrochemical Impedance Spectroscopy for Investigation of Different Losses in 4-cells Short Stack with Integrated Humidifier and Water Separator [Volume 3, Issue 2, 2016, Pages 127-136]
Rahgoshay, Seyed Majid Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization [Volume 3, Issue 3, 2016, Pages 183-197]
Rahimi, Masood Sulfurous Analysis of Bioelectricity Generation from Sulfate-reducing Bacteria (SRB) in a Microbial Fuel Cell [Volume 4, Issue 4, 2017, Pages 307-321]
Rahimi, Rahbar Numerical investigation of methanol crossover through the membrane in a direct methanol fuel cell [Volume 5, Issue 1, 2018, Pages 21-33]
Rahimi, Rahbar Transient Three-dimensional Simulation of a Metal Hydride Hydrogen Storage Tank Interconnected to a PEM Fuel Cell by Heat Pipes [Volume 6, Issue 2, 2019, Pages 117-132]
Rahimi-Ahar, Zohreh Numerical study on the performance prediction of a proton exchange membrane (PEM) fuel cell [Volume 4, Issue 4, 2017, Pages 249-263]
Rahimi-Esbo, Mazaher Electrochemical Impedance Spectroscopy for Investigation of Different Losses in 4-cells Short Stack with Integrated Humidifier and Water Separator [Volume 3, Issue 2, 2016, Pages 127-136]
Rahimi-Esbo, Mazaher Experimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization [Volume 3, Issue 3, 2016, Pages 183-197]
Rahimi-Esbo, Mazaher Experimental Study of Oxidant Effect on Lifetime of PEM Fuel Cell [Volume 7, Issue 1, 2020, Pages 33-43]
Rahimi-Esbo, Mazaher Design and Analysis of an Innovative Dead-end Cascade-type PEMFC Stack at Different Orientations [Volume 7, Issue 1, 2020, Pages 81-96]
Rahimi-Esbo, Mazaher Quantitative study of water level control system in PEM fuel cell separator for conservation of reactant gases [Volume 8, Issue 1, 2021, Pages 1-12]
Rahimi-Esbo, Mazaher Simulation of integrated purification systems for hydrogen production in methanol steam reforming process [Volume 10, Issue 3, 2023, Pages 158-199]
Rahimi-Esbo, Mazaher Assessment of a novel photovoltaic-electrolyzer-fuel cell-ORC hybrid energy system for hydrogen and power production [Volume 10, Issue 2, 2023, Pages 111-130]
Rahimi-Esbo, Mazaher New criterion for achieving efficient flow fields in PEM fuel cells [Volume 11, Issue 1, 2024, Pages 46-67]
Rahimi Takami, Mehdi Lattice Boltzmann Modeling of Methane Steam Reforming Reactions in Solid Oxide Fuel Cells [Volume 7, Issue 1, 2020, Pages 61-79]
Rahimi Takami, Mehdi Future prospects for solar energy production and storage in Iran [Volume 11, Issue 4, 2024, Pages 247-258]
Rahman, Md Saidur Optimization of Renewable Energy and Hydrogen Production for Residential Load in Alberta: A CFD Study [Volume 12, Issue 3, 2025, Pages 149-168]
Rahmani, Soudabeh A comparative study on the kinetics of carbon dioxide methanation over bimetallic and monometallic catalysts [Volume 3, Issue 1, 2016, Pages 59-71]
Rahmanian, Alireza Electrochemical Study of Hydrogen Adsorption/Reduction (HAR) Reaction on Graphene Oxide as Electrocatalyst for Proton Exchange Membrane Fuel Cells [Volume 2, Issue 2, 2015, Pages 99-107]
Rajabinasab, Morteza Effect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system [Volume 3, Issue 4, 2016, Pages 301-313]
Ramin, Farzin The effect of inclined radial flow in proton exchange membrane fuel cells performance [Volume 1, Issue 3, 2014, Pages 141-152]
Ramin, Farzin The effect of vertical injection of reactants to the membrane electrode assembly on the performance of a PEM fuel cell [Volume 3, Issue 3, 2016, Pages 167-182]
Ramin, Farzin The effect of increasing the multiplicity of flow fields contact surface on the performance of PEM fuel cell [Volume 4, Issue 1, 2017, Pages 69-83]
Ranjbar, Faramarz Numerical Analysis of Key Parameters Influencing the Replacement of a Shell-and-Tube Heat Exchanger with an Automotive Radiator [Volume 13, Issue 1, 2026, Pages 31-38]
Ranjbar, Faramarz Innovative Shell-and-Tube Heat Exchanger Design for Automotive Radiator Replacement: A Novel Approach to Replacing Car Radiators [Volume 12, Issue 4, 2025, Pages 275-284]
Ranjbar, Maryam Preparation, characterization and the study of electrochemical behavior of Y-doped Bariumcerate powders by new precursors [Volume 10, Issue 1, 2023, Pages 1-10]
Ranjbar, Maryam Nickel oxide-gadolinium doped ceria synthesized by new methods as anodes material for solid oxide fuel cells [Volume 9, Issue 2, 2022, Pages 133-147]
Ranjbar, Mehdi Hydrogen sensing by localized surface plasmon resonance in colloidal solutions of Au-WO3-Pd [Volume 4, Issue 2, 2017, Pages 119-124]
Ranjbar, Seyyed Faramarz Exergy-Economic analysis of combined cooling, heat and power system utilizing solar energy and biomass [Volume 11, Issue 4, 2024, Pages 271-284]
Ranjbar, Seyyed Faramarz Enhanced Cooling System Design for Single and Double Pass Condensers: A Comprehensive Technical, Chemical, Economic, and Environmental Feasibility Study [Volume 12, Issue 3, 2025, Pages 181-192]
Ranjbar, Seyyed Faramarz Proposing a Hydrogen Liquefaction Cycle for Geothermal Energy Storage in an Innovative Multi-Generation System [Volume 12, Issue 1, 2025, Pages 1-8]
Ranjbar, Seyyed Faramarz Investigating Numerically the Impact of Phase Change Materials on Heat Exchangers to Optimize Energy Consumption [Volume 13, Issue 2, 2026, Pages 105-112]
Raoof, Amir The Impact of Wettability on Effective Properties of Cathode Catalyst Layer in a Proton Exchange Membrane Fuel Cell [Volume 3, Issue 3, 2016, Pages 233-245]
Rash-Ahmadi, Samrand Applying geothermal and solar energies for the thermodynamic estimation of the multigeneration system’s performance in producing power, freshwater and hydrogen [Volume 11, Issue 3, 2024, Pages 179-188]
Rash-Ahmadi, Samrand The Effect of Using an ETC Collector on Increasing the Geothermal Fluid Temperature in a Multigeneration System [Volume 13, Issue 1, 2026, Pages 67-74]
Rashidi, Alimorad Facile Synthesis of N, S-Doped Graphene from Sulfur Trioxide Pyridine Precursor for the Oxygen Reduction Reaction [Volume 4, Issue 3, 2017, Pages 231-240]
Rastegari-fard, Freshteh Oxygen reduction reaction on Pt/C at the presence of super paramagnetic of Fe3O4 nanoparticles for PEMFCs [Volume 1, Issue 1, 2014, Pages 41-46]
Raza, Ali Investigating the Effects of Operating Parameters on Hydroxy Gas Production through Solar-Powered Alkaline Water Electrolysis: a COMSOL Simulation and Experimental Approach [Volume 12, Issue 1, 2025, Pages 9-18]
Razavi, Seyed Esmail Investigating Numerically the Impact of Phase Change Materials on Heat Exchangers to Optimize Energy Consumption [Volume 13, Issue 2, 2026, Pages 105-112]
Rezaei, Mehran Effect of K2O on the catalytic performance of Ni catalysts supported on nanocrystalline Al2O3 in CO2 reforming of methane [Volume 2, Issue 4, 2015, Pages 215-226]
Rezaei, Mehran A comparative study on the kinetics of carbon dioxide methanation over bimetallic and monometallic catalysts [Volume 3, Issue 1, 2016, Pages 59-71]
Rezaei, Mehran Investigation of the catalytic performance and coke formation of nanocrystalline Ni/SrO-Al2O3 catalyst in dry reforming of methane [Volume 3, Issue 4, 2016, Pages 315-322]
Rezaei Firozjaee, Mohammad Experimental Investigation of a High Efficiency Power Path Controller for PEM Fuel Cell and Battery Hybrid System [Volume 9, Issue 2, 2022, Pages 149-161]
Rezaei Firozjaee, Mohammad Fuel Cell Power System Conceptual Design for Unmanned Underwater Vehicle [Volume 10, Issue 1, 2023, Pages 33-50]
Rezaei Firozjaee, Mohammad Assessment of a novel photovoltaic-electrolyzer-fuel cell-ORC hybrid energy system for hydrogen and power production [Volume 10, Issue 2, 2023, Pages 111-130]
Rezazadeh, Sajad Thermodynamic and Thermoeconomic Analysis of the Use of Wind and Solar Energy to Supply the Energy Requirements of a Multigeneration System [Volume 13, Issue 2, 2026, Pages 167-186]
Riahinasab, Mehdi Analysis of the Impact of Energy Storage Units on Frequency Regulation Stability in Hydrothermal Power Plant Using State Space Modeling [Volume 13, Issue 1, 2026, Pages 1-16]
Riazat, Mohammad A new approach to microstructure optimization of solid oxide fuel cell electrodes [Volume 4, Issue 2, 2017, Pages 93-102]
Riyadh Shabeeb Shabeeb, Ali Thermoeconomic Analysis of a Solar-Gas Turbine System for Power, Cooling, Hydrogen and Freshwater Production [Volume 12, Issue 4, 2025, Pages 285-296]
Rostami, Khosrow A Critical Review of Continuous Biohydrogen Production [Volume 13, Issue 2, 2026, Pages 83-104]
Rowshanzamir, Soosan Preparation of Nitrogen-Doped Graphene By Solvothermal Process as Supporting Material for Fuel Cell Catalysts [Volume 1, Issue 2, 2014, Pages 113-119]
Rowshanzamir, Soosan Hydrothermal synthesis of nano-size zirconia using commercial zirconia powder: process optimization through response surface methodology [Volume 1, Issue 3, 2014, Pages 163-173]
Rowshanzamir, Soosan Multi-walled carbon nanotubes supported palladium nanoparticles: Synthesis, characterization and catalytic activity towards methanol electro oxidation in alkaline media [Volume 2, Issue 2, 2015, Pages 67-74]
Rowshanzamir, Soosan Investigation of ion transport and water content properties in anion exchange membranes based on polysulfone for solid alkaline fuel cell application [Volume 2, Issue 1, 2015, Pages 13-25]
Rowshanzamir, Soosan Studies on the SPEEK membrane with low degree of sulfonation as a stable proton exchange membrane for fuel cell applications [Volume 3, Issue 3, 2016, Pages 221-232]
Saadaoui, Farid Development and Simulation of a PEM Fuel Cell model for Prediction of Water Content and Power Generation [Volume 4, Issue 4, 2017, Pages 289-299]
Saadatinasab, Mohammad Determination of thermodynamic parameters of hydrogen permeation of palladium membrane for considering the effect of stainless steel support [Volume 1, Issue 1, 2014, Pages 1-10]
Saberimoghaddam, Ali How to Design a Cryogenic Joule-Thomson Cooling System: Case Study of Small Hydrogen Liquefier [Volume 3, Issue 2, 2016, Pages 113-125]
Saberimoghaddam, Ali Influence of unsuitable operational conditions on the transient performance of a small hydrogen liquefier [Volume 3, Issue 3, 2016, Pages 199-212]
Saberimoghaddam, Ali Investigation of carbon dioxide capture from hydrogen using the thermal pressure swing adsorption process: Central composite design modeling [Volume 4, Issue 1, 2017, Pages 13-26]
Saberimoghaddam*, Ali Performance verification of a laboratory scale hydrogen/oxygen combustion chamber [Volume 9, Issue 1, 2022, Pages 27-38]
Saboohi, Zoheir Comparison of waste heat recovery from a Proton Exchange Membrane fuel cell by gas turbine or Organic Rankin Cycle: a display of 3E analysis [Volume 8, Issue 2, 2021, Pages 103-112]
Sabzpoosh Saravi, Vahid Power Management in Grid-Scale Energy Storage Systems; A Case Study of Trends [Volume 12, Issue 2, 2025, Pages 105-126]
Sadeghhassani, Sedigheh Facile Synthesis of N, S-Doped Graphene from Sulfur Trioxide Pyridine Precursor for the Oxygen Reduction Reaction [Volume 4, Issue 3, 2017, Pages 231-240]
Sadeghi, Davood Morphological and physical study of Cu-Ni sintered porous wicks used in heat pipes and fuel cells [Volume 3, Issue 4, 2016, Pages 255-266]
Sadeghi, Saber Effect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system [Volume 3, Issue 4, 2016, Pages 301-313]
Sadeghi, Saber Multi-objective optimization of two hybrid power generation systems for optimum selection of SOFC reactants heat exchangers mid-temperatures [Volume 4, Issue 3, 2017, Pages 175-188]
Sadeghi, Saber Energy and economic comparison of SOFC-GT, MCFC-GT, and SOFC-MCFC-GT hybrid systems [Volume 4, Issue 4, 2017, Pages 275-287]
Sadeghian, Zahra The effect of copper infiltration on LSM Cathode microstructure in high temperature solid oxide fuel cells [Volume 10, Issue 4, 2023, Pages 281-290]
Sadrameli, Seyed Mojtaba Sulfurous Analysis of Bioelectricity Generation from Sulfate-reducing Bacteria (SRB) in a Microbial Fuel Cell [Volume 4, Issue 4, 2017, Pages 307-321]
Saeedi, Ali Impact of product gas recycling on steam methane reforming performance with Ni and Rh catalysts [Volume 11, Issue 3, 2024, Pages 169-178]
Safavenejad, Ali Performance assessment of a SOFC cogeneration system for residential buildings located in eastern Iran [Volume 3, Issue 2, 2016, Pages 81-97]
Saghafi, Hadi A new SEPIC-Zeta bidirectional converter with high efficiency for renewable energy systems [Volume 11, Issue 3, 2024, Pages 142-152]
Saghafi, Hadi A new ZVT interleaved high step-up converter with ripple cancellation for photovoltaic systems [Volume 11, Issue 4, 2024, Pages 225-236]
Sahebi Joibari, Iman Experimental Analysis of Fiber Laminating Effects on Flexural Rigidity of Composite Endplates for Use in PEM Fuel Cells [Volume 9, Issue 2, 2022, Pages 97-106]
Sajadyan, Zahra Modeling of mass transfer in a T-shaped microfluidic fuel cell [Volume 10, Issue 2, 2023, Pages 147-156]
Salamati, Hadi Hydrogen sensing by localized surface plasmon resonance in colloidal solutions of Au-WO3-Pd [Volume 4, Issue 2, 2017, Pages 119-124]
Salavati-Zadeh, Ali Electrochemical simulation of lithium-ion batteries: a novel computational approach for optimizing performance [Volume 11, Issue 4, 2024, Pages 215-224]
Salem, Ramzi S. Prospects and challenges for the production and use of green hydrogen as a promising energy in Libya [Volume 11, Issue 1, 2024, Pages 1-7]
Salimi, Mohsen Future prospects for solar energy production and storage in Iran [Volume 11, Issue 4, 2024, Pages 247-258]
Samiee, Leila Facile Synthesis of N, S-Doped Graphene from Sulfur Trioxide Pyridine Precursor for the Oxygen Reduction Reaction [Volume 4, Issue 3, 2017, Pages 231-240]
Samimi, Abdolreza Implementation of Chitosan modified ultrafiltration hollow fiber as proton exchange membrane of ml-scale microbial fuel cells [Volume 10, Issue 4, 2023, Pages 299-310]
Sang Davini, Hossein Design and Investigation of Honeycomb End Plates for PEM Fuel Cells [Volume 4, Issue 3, 2017, Pages 189-199]
Sareban, Rasol An Improved Zero Current Transition High Step-Up Single-Switch Converter for Fuel Cell Applications [Volume 12, Issue 3, 2025, Pages 217-226]
Sarhaddi, Reza "Physical properties and electronic structure of LaNi5 compound before and after hydrogenation: An experimental and theoretical approach" [Volume 1, Issue 1, 2014, Pages 27-39]
Saydi, Davood Optimization of the preparation procedure of Ni/Al2O3 catalyst for steam reforming of n-butane [Volume 2, Issue 3, 2015, Pages 139-149]
Scholta, Joachim Generalization of a CFD Model to Predict the Net Power in PEM Fuel Cells [Volume 6, Issue 1, 2019, Pages 23-37]
Seddighi, Shahaboddin Numerical-experimental study on the thickness distribution of metallic bipolar plates for PEM fuel cells [Volume 9, Issue 1, 2022, Pages 1-18]
Seddighi, Shahaboddin Study of the forming process effects on the wrinkling and thinning percentage of the micro-channels with serpentine layout [Volume 10, Issue 1, 2023, Pages 81-93]
Sedighi, Majid A review of the main mechanisms of catalyst layer degradation in polymer electrolyte membrane fuel cell (PEMFC) and different performance recovery methods [Volume 6, Issue 2, 2019, Pages 91-115]
Sedighi, Majid Simulation of integrated purification systems for hydrogen production in methanol steam reforming process [Volume 10, Issue 3, 2023, Pages 158-199]
Shafiey Dehaj, Mohammad Thermoeconomic Analysis and Optimization of a Novel Geothermal Energy-Based Multigeneration System for Liquid Hydrogen, Hot Water, Cooling and Power Production [Volume 13, Issue 2, 2026, Pages 149-166]
Shahabi, Ali Solar and Wind-Powered Charging in Tehran: A New Era for Electric Vehicles and Hydrogen Bikes [Volume 12, Issue 4, 2025, Pages 227-242]
Shahbazi, Ebrahim Parametric study of a membrane energy exchanger based on energy, entropy, and exergy analysis for proton exchange membrane fuel cell application [Volume 11, Issue 3, 2024, Pages 153-168]
Shahgholian, Ghazanfar Comparison and Analysis of Dynamic Behavior of Load Frequency Control in Power System with Steam, Hydro and Gas Power Plants [Volume 10, Issue 4, 2023, Pages 311-325]
Shahgholian, Ghazanfar Small signal stability analysis and frequency control in a single-area multi-source electrical energy system [Volume 11, Issue 2, 2024, Pages 107-116]
Shahgholian, Ghazanfar A brief review on the application of the virtual impedance method in islanded alternating current microgrids to control reactive power sharing [Volume 11, Issue 3, 2024, Pages 189-204]
Shahgholian, Ghazanfar Simulation of the Dynamic Behavior of the Load Frequency Control System in the Power Network by Combining Different Power Plant [Volume 12, Issue 3, 2025, Pages 203-216]
Shahgholian, Ghazanfar Analysis of the Impact of Energy Storage Units on Frequency Regulation Stability in Hydrothermal Power Plant Using State Space Modeling [Volume 13, Issue 1, 2026, Pages 1-16]
Shahgholian, Ghazanfar Analysis and Simulation of the Effect of Combining Load Frequency Control and Automatic Voltage Regulation in Hydrothermal Power System [Volume 13, Issue 1, 2026, Pages 39-54]
Shahnazari, Mohammadreza Lattice Boltzmann modeling of two component gas diffusion in solid oxide fuel cell [Volume 2, Issue 4, 2015, Pages 263-270]
Shakeri, Mohsen Investigation and optimization of a PEM fuel cell’s electrical and mechanical behavior [Volume 3, Issue 1, 2016, Pages 1-10]
Shakeri, Mohsen A new approach to microstructure optimization of solid oxide fuel cell electrodes [Volume 4, Issue 2, 2017, Pages 93-102]
Shakeri, Mohsen Finite Element Simulation and ANFIS Prediction of Dimensional Error Effect on distribution of BPP/GDL Contact Pressure in PEM Fuel Cell [Volume 4, Issue 2, 2017, Pages 125-138]
Shakir Hossein Hossein, Eman The Effect of Using an ETC Collector on Increasing the Geothermal Fluid Temperature in a Multigeneration System [Volume 13, Issue 1, 2026, Pages 67-74]
Sharifi, Shima Numerical investigation of methanol crossover through the membrane in a direct methanol fuel cell [Volume 5, Issue 1, 2018, Pages 21-33]
Shateri, Majid Energy Management Simulation in a PEM Fuel Cell System [Volume 2, Issue 1, 2015, Pages 1-6]
Sheikhveisi, Amir Mohammad Enhancing Solar Energy Utilization in Buildings: Integrating Transparent Solar Panels and BIPV/T Systems for Optimal Energy Efficiency in Tabriz, Iran [Volume 12, Issue 1, 2025, Pages 45-58]
Shirani-Faradonbeh, Hasan Synthesis and investigation on microstructure and electrical conductivity of Ruddlesden-Popper phase, La1.9Sr0.1Ni0.7Cu0.3O4 (LSNC), as cathode material for intermediate temperature solid oxide fuel cells [Volume 8, Issue 2, 2021, Pages 69-76]
Shirvani, Hassan Thermodynamic evaluation of a novel geothermal and solar-driven multigeneration system for hydrogen and freshwater production [Volume 10, Issue 1, 2023, Pages 51-67]
Shirvani, Hassan Parametric Study of an ORC-EJR Cycle Based on Energy and Exergy Analysis for Power, Heating, Cooling, and Hydrogen Production [Volume 12, Issue 2, 2025, Pages 75-82]
Shirvani, Hassan Exergy and energy analysis of a combined cooling, heat, hydrogen and power generation system utilizing geothermal energy [(Articles in Press)]
Shivaie, Mojtaba Optimal Design of a Fractional-Order Controller for Stabilization and Control of DC Microgrids in the Presence of Constant Power and Voltage Loads Using a Grey Wolf Optimization Algorithm [Volume 12, Issue 2, 2025, Pages 89-104]
Simayi, Yibadatihan The significance of key operational variables to the enhancement of hydrogen production in a single-chamber microbial electrolysis cell (MEC) [Volume 2, Issue 2, 2015, Pages 85-97]
Solaimany Nazar, Ali Reza Numerical study on the performance prediction of a proton exchange membrane (PEM) fuel cell [Volume 4, Issue 4, 2017, Pages 249-263]
Soltani, Jafar A sensorless adaptive non-linear control scheme for minimizing the stator energy losses of IPMSM [Volume 11, Issue 2, 2024, Pages 131-141]
Sovizi, Mohammad Reza A high performance lithium-ion battery using LiNa0.02K0.01FePO4/C as cathode material and anatase TiO2 nanotube arrays as anode material [Volume 4, Issue 1, 2017, Pages 27-35]
Sovizi, Mohammad Reza Preparation of Ni-P-CeO2 electrode and study on electrocatalytic properties for hydrogen evolution reaction [Volume 5, Issue 1, 2018, Pages 1-11]
Steinberger-Wilckens, Robert Numerical Investigation of a Hydrogen-fuelled Planar AP-SOFC Performance with Special Focus on Safe Operation [Volume 8, Issue 2, 2021, Pages 113-125]
T
Tafazoli, Mehdi A new approach to microstructure optimization of solid oxide fuel cell electrodes [Volume 4, Issue 2, 2017, Pages 93-102]
Taghizadeh, Majid Hydrogen production by steam reforming of dimethyle ether over Cu/ZnO/Al2O3 and H-ZSM-5 catalysts: An experimental and modeling study [Volume 1, Issue 3, 2014, Pages 153-161]
Taherinia, Maryam The effect of solvent of titanium precursor in the sol-gel process on the activity of TiO2 nanoparticles for H2 production [Volume 4, Issue 2, 2017, Pages 139-151]
Talati, Faramarz Enhanced Cooling System Design for Single and Double Pass Condensers: A Comprehensive Technical, Chemical, Economic, and Environmental Feasibility Study [Volume 12, Issue 3, 2025, Pages 181-192]
Talati, Faramarz Numerical Analysis of Key Parameters Influencing the Replacement of a Shell-and-Tube Heat Exchanger with an Automotive Radiator [Volume 13, Issue 1, 2026, Pages 31-38]
Talati, Faramarz Innovative Shell-and-Tube Heat Exchanger Design for Automotive Radiator Replacement: A Novel Approach to Replacing Car Radiators [Volume 12, Issue 4, 2025, Pages 275-284]
Talebi, Saeed Exergy and Energy Analysis of Effective Utilization of Carbon Dioxide in the Gas-to-Methanol Process [Volume 7, Issue 1, 2020, Pages 13-31]
Talebi Ghadikolaee, Hossein Study of the forming process effects on the wrinkling and thinning percentage of the micro-channels with serpentine layout [Volume 10, Issue 1, 2023, Pages 81-93]
Talebi-Ghadikolaee, Hossein Numerical-experimental study on the thickness distribution of metallic bipolar plates for PEM fuel cells [Volume 9, Issue 1, 2022, Pages 1-18]
Tanha, Mostafa SaberEffect of CO in the reformatted fuel on the performance of Polymer Electrolyte Membrane (PEM) fuel cell [Volume 4, Issue 2, 2017, Pages 153-165]
Tavakkoli, Mohammad Javad Prediction the hydrogen adsorption isotherm on nickel decorated carbon nanotubes by applying artificial neural network modeling [Volume 8, Issue 2, 2021, Pages 61-68]
Torabi, Farschad Extremely Fast Simulation of the Li--Ion Batteries Governing Equations [Volume 10, Issue 4, 2023, Pages 339-353]
Torabi, Farschad Mechanistic approach developed to estimation of exchange current density and charge transfer coefficient in lead acid batteries [Volume 11, Issue 1, 2024, Pages 68-77]
Torabi, Farschad Electrochemical simulation of lithium-ion batteries: a novel computational approach for optimizing performance [Volume 11, Issue 4, 2024, Pages 215-224]
Torabi, Morteza Experimental Investigation of a Solid Oxide Fuel Cell Stack using Direct Reforming Natural Gas [Volume 4, Issue 4, 2017, Pages 301-306]
Torkaman Asadi, Mohammad Javad Nonlinear Hopf Bifurcation Analysis for Predicting Stable Limit Cycles in Solar Stirling Thermal Oscillators [(Articles in Press)]
Torkavannejad, Ashkan The simulation of novel annular shape on the Performance in Proton Exchange Membrane Fuel Cell [Volume 1, Issue 3, 2014, Pages 175-188]
Torkavannejad, Ashkan Modeling and simulation of a new architecure stack applied on the PEM Fuel Cell [Volume 3, Issue 2, 2016, Pages 99-112]
V
Vaezi, Mohammad JavadEffect of Dehydration Temperature on the H2 Separation Potential of Hydroxy Sodalite Zeolite Membranes [Volume 1, Issue 4, 2014, Pages 209-214]
Vaezi, Mohammad JavadNanostructured Palladium-Doped Silica Membrane Layer Synthesis for Hydrogen Separation: Effect of Activated Sublayers [Volume 6, Issue 1, 2019, Pages 1-9]
Vuorinen, Esa Effects of coating thickness on corrosion and contact resistance behavior of TiN coated AISI 316L as bipolar plates for PEMFC [Volume 3, Issue 2, 2016, Pages 137-149]
Y
Yaghmaei, Soheila Modeling of Multi-population Microbial Fuel and Electrolysis Cells Based on the Bioanode Potential Conditions [Volume 1, Issue 4, 2014, Pages 247-260]
Yaghmaei, Soheila A comparative study of three types of anode electrodes in a microfluidic microbial fuel cell [Volume 8, Issue 1, 2021, Pages 13-21]
Yaghoubi, Somaye Multi-objective optimization of a combined heat and power (CHP) cycle with a solar collector: energy, exergy and economic point of view [Volume 11, Issue 2, 2024, Pages 95-106]
Yahyanezhad Gele, Maede A comparative study of three types of anode electrodes in a microfluidic microbial fuel cell [Volume 8, Issue 1, 2021, Pages 13-21]
Yaldagard, Maryam Green in-situ Fabrication of PtW/Poly Ethylen Dioxy Thiophene/Graphene Nanoplates/Gas Diffusion Layer (PtW/ PEDOT /GNP/GDL) Electrode and its Electrocatalytic Property for Direct Methanol Fuel Cells Application [Volume 6, Issue 1, 2019, Pages 39-58]
Yaldagard, Maryam Synthesis and electrochemical characterization of Graphene-Polyallylamine Nanocomposites as a New Supports of Pt Catalyst for Direct Methanol Fuel Cell Application [Volume 6, Issue 2, 2019, Pages 141-161]
Yaldagard, Maryam Ethanol electro-oxidation on Pt/CNFs-GNPs/GDL electrode for fuel cell application [Volume 9, Issue 1, 2022, Pages 69-85]
Yasari, Elham Prediction the hydrogen adsorption isotherm on nickel decorated carbon nanotubes by applying artificial neural network modeling [Volume 8, Issue 2, 2021, Pages 61-68]
Yazdani, Hamid Integration of a Vanadium Redox Flow Battery with a Proton Exchange Membrane Fuel Cell as an Energy Storage System [Volume 4, Issue 1, 2017, Pages 53-68]
Yazdani, Mohammad Rouhollah An Improved Zero Current Transition High Step-Up Single-Switch Converter for Fuel Cell Applications [Volume 12, Issue 3, 2025, Pages 217-226]
Yazdanshenas, Rahil Single walled carbon nanotube in the reaction layer of gas diffusion electrode for oxygen reduction reaction [Volume 1, Issue 2, 2014, Pages 75-82]
Yekani, Seyed Kazem Investigating Numerically the Impact of Phase Change Materials on Heat Exchangers to Optimize Energy Consumption [Volume 13, Issue 2, 2026, Pages 105-112]
Youneszadeh, Reza Experimental Investigation of a High Efficiency Power Path Controller for PEM Fuel Cell and Battery Hybrid System [Volume 9, Issue 2, 2022, Pages 149-161]
Youneszadeh, Reza Fuel Cell Power System Conceptual Design for Unmanned Underwater Vehicle [Volume 10, Issue 1, 2023, Pages 33-50]
Yousefi, Fereshte Electrocatalytic oxidation of glucose on the modified carbon paste electrode with sodalite nanozeolite for fuel cell [Volume 2, Issue 1, 2015, Pages 47-58]
Yousefi, Mohammad Reza Small signal stability analysis and frequency control in a single-area multi-source electrical energy system [Volume 11, Issue 2, 2024, Pages 107-116]
Yousefi, Vajihe Implementation of Chitosan modified ultrafiltration hollow fiber as proton exchange membrane of ml-scale microbial fuel cells [Volume 10, Issue 4, 2023, Pages 299-310]
Z
Zaherian, AmirAli Optimization of the preparation procedure of Ni/Al2O3 catalyst for steam reforming of n-butane [Volume 2, Issue 3, 2015, Pages 139-149]
Zamani, Mohammad RezaNumerical-experimental study on the Failure Behavior of Graphite-Based Composite Bipolar Plate for PEM fuel cells [Volume 9, Issue 2, 2022, Pages 107-116]
Zandi Atashbar, Navid Application of Pd-Substituted Ni-Al Layered Double Hydroxides for the Hydrogen Evolution Reaction [Volume 2, Issue 4, 2015, Pages 253-261]
Zangooei, Fatemeh Impact of product gas recycling on steam methane reforming performance with Ni and Rh catalysts [Volume 11, Issue 3, 2024, Pages 169-178]
Zanjani, S. Mohammadali Analysis and Simulation of the Effect of Combining Load Frequency Control and Automatic Voltage Regulation in Hydrothermal Power System [Volume 13, Issue 1, 2026, Pages 39-54]
Zare, Shahryar Hydrogen Utilization in Free Piston Engines: A Performance Investigation [Volume 12, Issue 1, 2025, Pages 31-44]
Zare, Shahryar Utilization of a Fifth-Order Model for Analyzing Stirling Oscillators [Volume 12, Issue 3, 2025, Pages 169-180]
Zare, Shahryar Nonlinear Hopf Bifurcation Analysis for Predicting Stable Limit Cycles in Solar Stirling Thermal Oscillators [(Articles in Press)]
Zareei, Javad Theoretical study of the effect of hydrogen addition to natural gas-fueled direct-injection engines [Volume 1, Issue 1, 2014, Pages 11-20]
Zareii, Mojtaba "Physical properties and electronic structure of LaNi5 compound before and after hydrogenation: An experimental and theoretical approach" [Volume 1, Issue 1, 2014, Pages 27-39]
Zare Mehrjardi, Hamid Reza Evaluation of electrocatalytic performance of PtCo/C nanoparticles in different proportions of cobalt for oxygen reduction reaction [Volume 10, Issue 4, 2023, Pages 291-297]
Ziaei-Rad, Masoud Parametric study of the influence of cooling channel dimensions on PEM fuel cell thermal performance [Volume 4, Issue 4, 2017, Pages 265-274]
Ziarati, mahmoud Hydrogen production via steam reforming of LPG on Ni/Zeolite catalysts [Volume 1, Issue 4, 2014, Pages 233-238]
Ziarati, Mahmoud Optimization of the preparation procedure of Ni/Al2O3 catalyst for steam reforming of n-butane [Volume 2, Issue 3, 2015, Pages 139-149]
Zirak, Parsa Parametric study of a membrane energy exchanger based on energy, entropy, and exergy analysis for proton exchange membrane fuel cell application [Volume 11, Issue 3, 2024, Pages 153-168]
Zolfaghari, Alireza Determination of thermodynamic parameters of hydrogen permeation of palladium membrane for considering the effect of stainless steel support [Volume 1, Issue 1, 2014, Pages 1-10]
